what vcore u need for that prime =.= is it 1.5?
good clock

This post has been edited by cyberloner: Dec 18 2007, 12:43 AM

@pWs,

just to correct u,im using Corsair ram,not Kingston.

thanks for the entry..

Already added
Thanks for the suggestion.


Database Updated.
Old entries added in. You will see one user with many entries.

-pWs-

can put aircond kaw kaw + hifh cfm fan ma...

hahaha...i think better do WC like u did than use aircond...if use aircond,later electricity bil goes up kaw-kaw also..

gonna buy xigmatek cooler soon...just waiting for money to fall from the sky.

its actually stable at 1.5v, but since my temps are still good even at 1.55v.. ive decided to leave it @ 1.55v for the peace of mind =)
Im sure u wont want to crash in the middle pwning in games xD

thx for updating bro.. but as for cooling.. ive ditched my cpns 9700NT and switched cooling approx 5 times till my current one already

You have to be very very carefull when you're dealing with temps below ambient. These sort of cooling method does indeed gives very good temps, but only for 1 overclocking session and not for long term use. If you're not carefull and didnt pay much attention to it and without proper insulation, the water from condensation will kill off your rig like roasted duck.

thanks for the info dude!

but i dont think im gonna use WC. my rig not that powerful,so doesnt worth with the WC value.

xigmatek cooler will be just nice for me...but thats also need to wait maybe till next month~

New updates from newbie here.





Any suggestions?

IMHO, a good cooling solution is always worth its price. Its not because of your current rig is powerfull or not. Especially these days where nearly all high ended 3rd party cooling is multi platform compatible, you can always use them again and again for your future upgrades. Unlike hardwares which will age very fast, cooling solution doesnt.

---

Added on December 18, 2007, 1:25 amim sure you can go higher bro, most of us F3 users here are able to run 3.0Ghz on stock vcore.

With your 1.4v, you can most likely achieve 3.2Ghz stable already.

This post has been edited by AoiNatsume: Dec 18 2007, 01:25 AM

my proc socket wet today...cant boot lol....nasib din burn anything...

i also will get xigmatek...coz this WC set pinjam from db punye ^^

Thats rite.Thanx bro.But now i dont really focus on the proc,its the rams.I want to get 12++ with tight timings.Any suggestions?

My rams currently running 2.65V

2.65 O_O got use any cooler or no? if not very dangerous la....

hmm..jealous ur ram can get those kinda voltage to drink..mine only 2.4...

another diehard OCer....2.65V
so what is the best speed/timing at this Vdimm?

This post has been edited by ongbs: Dec 18 2007, 01:36 AM

yours not "only" 2.4V cos belum nampak asap yet
What ram r u using? with active cooling?

This post has been edited by ongbs: Dec 18 2007, 01:38 AM

crucial ballistix tracer...800mhz one...got fan cooler la....

Lol.Im using the corsair ram cooler now.Just arrived today so i think its ok la.So far no smoke yet.
Will let my pc run orthos 24/7 first and see whether my rams can tahan or not.

No lah bro,im just targeting to get 26secs spi with this speed but still cannot.
Now using 5-5-4-3-2T 1200@3.0Ghz.

Now want to try 3.2Ghz @ 5-5-4-3-2T @ 13++ Hope i can get it.

hmm...my ram got heatspreader....sometimes during oc i'll touch it to check the temperature...

26secs is quite easy =x...but i think u need more than 3g

This post has been edited by dj.eRicZzz: Dec 18 2007, 01:49 AM

Bro,whats the speed of rams if i run 3.1Ghz at div 800?

sigh sigh... totally jealous haha.
My board max vdimm is 2.4 and 1.55 for vcore. 3.5Ghz is the highest benchable i can get while 3.6 boot but only lasts 10 secs in windows

Gonna get new board soon with phenom

Actually, Iced cooling is rather cheap. You dont have to go uber high end, you dont need a reservoir, and you dont need a radiator which can save up alot.

1. Pump = Get any pump from the aquarium shop which is submersible. Cost only approx RM20-RM45 (nirox P3800)
2. Waterblock, look for some used or any cheap second hand waterblock will do, might cost only approx RM50-150
3. Bucket = im sure you have one lying around ur hse...
4. Hose/tubes = just use any that you can find from your garden or get some gas tubes from your nearest hardware shop which will cost less than RM5
5. If ur lazy to make the ice, buy 1 pack from your nearest 7-11 which will cost less than RM5 for ALOT of ice.

Now... mount the waterblock on your cpu and connect the inlet/outlet tubes, on the tube connectors to the waterblock, wrap it with a cloth and ziptie/tie them. If possible, "spam" those Silica Gel packets that you see in a brand new shoe box or any stuff u buy that will prevent moist. It helps a little to reduce condensation.

Then.. connect the tube to the outlet of your pump, and just dump your pump in the bucket. connect another tube to the outlet of your waterblock and direct it to the bucket as well or if you dont mind keep refilling the water on the iced bucket and do not want the hot water to flowback to the ice, direct it to a separate bucket.

Power up your pump.. and you have an "Chilled Watercooling System"

with heatspreader the best u may put cooling fan on top, those 80mm fan will do...
trust me...even with heatspreader without fan temp still shoot up like mad

If got fan no harm trying 1.5V.