holy shite... my kvr on d9dcl also d same thing, need lotsa voltage (2.45v) to be prime stable @ ddr2 1000. but previously on intel it needed 2.2v only... could this be d same like eric case...     

Ya, try that, actually putting 236 fsb. running good through the benchmark with the default Vcore. I am selling due to my BIOS issue. Otherwise, I am keeping it. On the bug, I can disable the TLB and enable it. That's how to compare with B3 stepping. Those waiting for B3 might want to consider as it need to wait till May. The bug very unlikely to cause system hang, as most of us do not run 100% cpu process all the time. Only virtualization on servers.

d funny thing is, ddr2 970~980 ish is primable with 2.25v, but ddr2 1000 wont boot at 2.35v (got beep during boot up). at ddr2 1000 with 2.25v is bootable & sp 32M passed, blardy ram, dunno wat's wrong with it...     

wooohoooo
received RAID card and 4pin to 8pin convertor
testing start now

I saw a 12v molex connector there.
What does that use for?

it's a 1R0M PWM with 3 mosfets 
sorry pic not clear

8 hr just to measure how long it can keep stable,
so,what the vdimn shud i use?or just trying increment 1 by 1.(take much time )
some people said better to keep 533 rather than change to 667.

tried bro ah_khoo's suggestion just now
instead of set the cpu multiplier manually , i leave it as 'auto'
problem solved, no more auto jump to 9.5 multiplier

OEM Micron D9GKX DDR2 800 512mb  x2, ( gonna add 2 more maybe at this month )

so, btw

wat vcore should i put at that 2835mhz ?

lol u wan u come my hse n take..not in the mode to oc now lol...my mobo n everything in casing now xD

dblooi: I tried x10 multi but it'll not able to boot up. only x9 can boot nicely. I'll try around 1.5V and c how's the temp this weekend. If use chilled water cooling, can go up how high for vcore ? I think the fan turn off by itself bcoz of my aircond room. Coz in the noon the fan run full speed, had to use the controller to reduce the noise. But in normal 30c room temp, the 2 cores from everest and coretemp readings, it can reach 40C for idle at the moment for the setup. I don't have orthos yet, so dunno whether how high it'll be.

-pws- : bro, if i got super pi 32m result with the screen shot then can put my result in the 1st post ah ? hehe

Ok, i'll try 1.5V 1st. hehe

I'm using the DFI board, same as -pws-. ongbs bro told me to try with multi x9, oni i manage to go up to 2.94ghz with stock vcore of 1.225v.

The ori bios.

holycow.... flashed corrupted bios for that TA770 
not sure bcoz of the file corrupted or i flash in OCed condition 
now 911 rescuing 

Nice bro.Will see how things go with TA770 + Ice WC.
Haha,you are also a hardcore.

my spec is
3800
twinX 512*2
250gb hdd

x1950pro
dfi infinity ultrall-m2
can i know how to overclock the processor?
because the maximun internal clock only 2.2ghz isnt it?
some guide to guide me plz~