...by the way where u living?

Hi guys,
Have heard about this MSI 7376 K9A CF.Its a A790D.I tried to google to see the reviews but its kind of disappointing.
I cant find any of it.I wonder how does the OC capabilities are like.

Anyone who have this,please share a bit of it.

Its kind of interesting since the price tag is only at RM350.

wow... its damm rare to see DFI with such a classy packaging and some fancy looking board layout. Usually DFI packaging looks damm cheap

let me answer on behalf of our mod, it's a 5000+ B.E IIRC. 

Any 770 mobo user here? How's the OC ability of the board? Might want to get one soon tho. My TA690G coz some issues with vista apparently.

ya lor.i also wanna know the OC potential of this mobo..i heard you can pump up the vdimm voltage kaw2x punya(2.9v)..but the vcore tak tahu lah..there are some review on this mobo on hardware thread..take look lah..smua org like scare nak try this mobo..need someone dats have little bit extra money    buy this mobo OC kaw2x and give review on it..but i wonder siapa berani nak buat mcm tu maa??

DFI has been classy/fancy since the first Lanparty board was introduced... that was like since the K7 era already 
naah.... just a 4400+ DO 

DFI has been classy/fancy since the first Lanparty board was introduced... that was like since the K7 era already 
naah.... just a 4400+ DO 

i berani...u bring me to lowyat shopping la

hahaha.very funny..  .got sponser ofcuz lah berani..  .

Hi guys,

I just setup the F3 with the DFI NF Ultra M2 yesterday with D9gmh 512x2. Can I know is the stock bios good to use to oc it ? I set the vcore to "default" and 1.8V for the ram, DDR533, 250 x 10, FSB ratio 4, no prob to boot up to 2.5GHz, 1000 HT and 625MHz for ram at 4-4-4-12-1T.

But, if i go above 250fsb, it can't boot up even though i change the fsb ratio to x3. Need more vcore ? May I know whats the default value ? Should i set to 1.200V or higher ?

Bro -pws- and CV6149: same board as u guys, what to do next to get 3.1ghz ? Using TT V1, temp in Everest is 33C on each core.

CV6149:  this is the burnt mobo lo, hehehe, manage to replace the diode. Testing it out b4 try out on the abit NF-M2 nView.

Please help to guide noob guys. 

Will upload SS tonite, its at home now. idling.

Actually the mid range performance ram same like XMS2, its wrap with heatsink relax...

--------------------------
Most ram heatsinks are useless la..many of them even trap heat and make overclocks worse.

Hi guys,

I just setup the F3 with the DFI NF Ultra M2 yesterday with D9gmh 512x2. Can I know is the stock bios good to use to oc it ? I set the vcore to "default" and 1.8V for the ram, DDR533, 250 x 10, FSB ratio 4, no prob to boot up to 2.5GHz, 1000 HT and 625MHz for ram at 4-4-4-12-1T.

But, if i go above 250fsb, it can't boot up even though i change the fsb ratio to x3. Need more vcore ? May I know whats the default value ? Should i set to 1.200V or higher ?

Bro -pws- and CV6149: same board as u guys, what to do next to get 3.1ghz ? Using TT V1, temp in Everest is 33C on each core.

CV6149:  this is the burnt mobo lo, hehehe, manage to replace the diode. Testing it out b4 try out on the abit NF-M2 nView.

Please help to guide noob guys. 

Will upload SS tonite, its at home now. idling.

1. Tried update bios??
2. Which slot you plug in your ram? Is it nearest to CPU??
3. What your stock Vcore??

-pWs-

1. yes, got the latest bios edi. flashed to 1.4
2. DIIM1 & 2 n dual channel active (yes, nearest to cpu)
3. Stock vcore is 1.25v

additional info :

Stock Multiplier is 11.5x
Stock FSB is 200.5

try to oc with single ram..

Which one??

-pWs-