bro pws and cv6149,
have you guys ever try to oc the highest HTT that u can get with your mobo?
maybe can drop multi to 5, try to push the HTT kaw kaw,
see how far it can go 

my proc is currently running at 2.5ghz. if i enable C&Q, would it make it unstable??

asus m3a looks lauya ler, cheap caps summore, not even solid caps for cpu. at rm380... it's kinda expensive for a brown motherboard

hehe, that's why i suggest to do so 
for TA770 giak giak..
haha, just kidding la 
actually i suspect is DFI ultra2 M2 cannot do more than 360HTT
hmm....not really sure about that, 
just a suspection though 

Additionally, we also tested maximum bootable HTT via the BIOS. First, we managed to get pass 400HTT at x6 CPU and x2 multiplier but we believe board has more to offer. To our surprised, we managed to boot from BIOS at 440HTT. No, that was not a typo and we are serious that this board booted at 440HTT. It was also done easily without increasing chipset or HTT voltage. However, we had to run the CPU at x4 and HTT at x1 multiplier to get such amazing overclocks. Although 440HTT was impressive, we wanted more and tried using ClockGen in Windows but failed to get pass 440HTT, even with raised chipset and HTT voltages. So, we guess we finally hit the ceiling at 440HTT.

Sorry, pWs.
I want to overclock my cpu AMD 64x2 5600.
Can any pros provide some advice or guideline?

Mobo : Asus M2N-E
Ram : 3x1Gb Corsair DDR2 667mhz
Graphic : Gigabyte 8800GT 512mb

pWs, do I need any kind of software to do the settings?
My cpu only has the stock cooler fan, do I need to change for the better cooler
before start to overclock it?

2.3v bro
btw those just fake only not stable at all

Heppi new year all!

Thanks to bro CV and dblooi now can orthos stable thought only at 3.2
my board or the ram (not sure) didnt like loose timing just like CV said,when loose timing 5-5-5-15 at divider 400 the board wont boot....dunno why..i think this is the cause prime always fail lol

haha same like me pws,just now stable at 3.2 then 3.3 cannot pulak  anybody help us

btw how to check PWM temp on dfi mobo?what software?

ta 770?have anyone try it b4?how much?

No lah bro,2.9V is tooooo high la.
2.5v  is enough d for my rams.
I just want to try ATX since the performance is as good as TA690G.

I dont have a prove yet bro.
But to me,after reading a lot in this thread about TA770,its kind of promising.
With the price tag @ RM320,the layout is almost the same as TA690G,its just that its ATX.
Also,the Hyper Transport hit 5.2G.
Besides,i still blur about the audio port,in the spec review said,it have S/PDIF out,but i cant see it at the rear I/O in the pictures.
Maybe its optional.well thats okey.

The most best part is,IF i am not mistaken,dblooi said the on board graphic is 3 times better than the TA690G.

see first 780 chip ler.. for budget oc..

of course 1.5 is lousy, im sure everyone that is willing to pay RM5xx for a motherboard does not intend to run it on stock clock. For that price, its definately an enthusiasist level and buyers of those board has intention of overclocking. I've already mail them about this issue.

ya lah need to invite those dat oredi use TA770.try google on this mobo but doesnt have much review lah..if is great for overclock and durability i think i will get this mobo,..who want a mobo dats after Oc kaw2x but can tahan for 2-3months only.to me durability is importants also.

after i read thru this thread i found out most of you guys match OUr proc wit ATI HD 3870 rather than nvidia 8800gt/gts or gtx..why haa.??with ati is really super duper Great ka interm of graphic performance ??or maybe it because ATI is from AMD too..IF ATI claims to be great gc than nvidia..can someone from you all dats experience using ATI HD3870 show some prove or any article related on these two giant GC brand.

for your case I think shud not be a problem.Since the heatsink fan does circulate the air around.
Add 1 more fan 12cm for exhaust la bro...For wc guy,shud have some prob with it since no fan to give some air to pwm....
buy the small2 heatsink from Lelaman(cheap) in sales and use it on ur pwm.

Bro pws
how much u pump vdimm for 5-4-4-7-11?

true , max 1.676v support is more than enough for stable overclock (24/7 usage)
but i guess still not enough for extreme overclockers like bro xixo_12 and AoiNatsume 

aik bro, my nick is ah_khoo, not ah_koo leh...     

angkut dari lain forum loh... manyak harta karun over there... 

hopefully luck will be with me... 

its a D2 800mhz, havent really push it yet, after some quick test it is still unable to beat my old 10th anniversary.

So far, its running on the same settings as my crucial on a 24/7 clock (1066mhz/2.2v/5-5-5-15)

My new 3870 should be arriving today, next month upgrade would be phenom. Damm cant wait !!

btw, ive sold my tracers, will cod with another forumer here today for OCZ Reaper HPC edition.