nice artifact setting??

??? what is that forgive me for being slow
btw the stock voltage for the gpu is 1.10v
and the max voltage that can be set is 1.20v
it's not much but im aiming to break the 1.9ghz shader barrier and as im typing im still scanning artifacts @ 1.890ghz shader

This post has been edited by ben_panced: Feb 2 2008, 11:10 AM

does this utility works with asus card

open case still the best as some of the forumer did that too. just for the best air ventilation... ..... hmmm CM690 is a good case but if u seeking a bigger side fan or lighter casing, then CM690 is not for u..... CM690 is damn heavy as the casing itself already 9.7kg...... with power supply about 2.5kg for a good 1... and all hardware inside... mostly will be more than 15kg already... haha so heavy....

no lar, the utility only works with this gigabyte card:



and this only:



btw, the chip that i circled is the overvoltage controller chip

This post has been edited by ben_panced: Feb 2 2008, 11:23 AM

which is urs?

This post has been edited by vincentlaw: Feb 2 2008, 12:21 PM

mine is the 2nd one in the picture..
the one with zalman vf-830alcu hsf...
more powerful hsf than vf-700alcu

Hello everybody !

I'm using 8800GT too , here is my card :

My 8800GT



Not yet take the temp readings...

welcome to the family.

Asus card does nt support overvoltage feature izit?

ohhh.... nice... that is the latest cooler for gigabyte 8800GT?? how about the zalman VF1000?? they got it with 8800GT?

wokeh an update,
it seems the shader cannot break the 1.9ghz barrier on 1.2v..
to bad the max voltage that be set is 1.2v
so im stuck with 1.89ghz shader just 10mhz shy of 1.9ghz
btw heres the screenshot for atitool and 3dmark06

wow nice.... ur amp edition is wat clock??? 700mhz ?

---

Added on February 2, 2008, 3:53 pm@S4PH
use spoiler when u wanna quote picture pls...

---

Added on February 2, 2008, 3:54 pm@ben_panced
is it worth to overvolt it?? how much performance increase from ur stock?

This post has been edited by vincentlaw: Feb 2 2008, 03:54 PM

May i know how to post pic?

@TheTraffic
click addreply at near bottom right side.. a new page will appear...
click on browse and locate ur picture... then click "add this attachment" beside it
then it shud load and u will see ur pic is listed.. then submit

yup, tho the performance dont increase much, it's the satisfaction of overclocking is that matters,
besides, if the gpu is operating in a safe temperaure range, u dont have to worry about it..
btw, my 8800gt load temp is about 70c.. and remember i overvolted my gpu core to 1.2v from 1.1v and i oced my 8800gt to 756/1890/1944
so the conclusion is, gigabyte's new 8800gt with zalman vf-830alcu rocks and worth every penny,
lucky i didnt buy 8800gt from other manufacturers

This post has been edited by ben_panced: Feb 2 2008, 04:18 PM

overvolting too much also will spoil eventhou the temp is good.... like CPU... so be aware of it too..

others also good wat....exampl zotac,asus.... also depend on diff taste i shud say

hmmm stable in 3dmark and atitool doesnt really 100% confirm stable in game also... last time i tried with ATItool and 3dcard for my 7800GS EE... stable but go in some game, the artifact show....

This post has been edited by vincentlaw: Feb 2 2008, 04:26 PM

no lar overvolting a little wont hurt ur gpu unless u overvolt like mad..
but it's the temperature that can kill ur cpu or gpu..
so before ocing or overvolting, make sure u have adeaquate cooling first

Here's my new GC... Colorful GF8800GT w Zalman HSF....
Glad to join you guys....!
May need some advices in future thou...


Attached thumbnail(s)