Outline ·
[ Standard ] ·
Linear+
Diamond Thermal Paste! 10c drop from as5!, DIY thermal paste with diamond powder
|
TSseanl
|
 Dec 3 2007, 02:05 PM, updated 19y ago
|
|
Check this link out: Inventgeek.comQUOTE Anybody who is a true computer hardware enthusiast these days knows that keeping your CPU from overheating while pushing it to its limits is one of the most important concerns. Thermal compounds like arctic silver are the front line of that defense, conducting the heat directly from the CPU to the heat sink. Without the compound, small imperfections in the surface of the heat sink can render the heat sink almost useless and lesser compounds can actually insulate your processor. Thermal compounds that are available for purchase have remained unchanged for some time. So I descided it was time to reinvent my thermal compound needs with some diamond dust! it provides a 10 degree celcius drop over as5  , and it's not as expensive as you might think.. the only way to prove the credibility is to do it.... care to give it a try? first thing first, where to get rough diamonds here? This post has been edited by seanl: Dec 3 2007, 08:40 PM |
|
|
|
|
|
IcEMoCHa
|
Dec 3 2007, 03:58 PM
|
|
|
oO?... DIAMOND DUST?... carbon good conductor of heat meh?.. =.=
|
|
|
|
|
|
mcchin
|
Dec 3 2007, 09:21 PM
|
|
|
QUOTE(IcEMoCHa @ Dec 3 2007, 03:58 PM) oO?... DIAMOND DUST?... carbon good conductor of heat meh?.. =.= in diamond configuration yes heck i found some diamond polishing compound (brand RLY) that has a grit of 1400 but the maintanance dude keep saying this stuff is pricy ~rm200 per syringe plus after thorough thought it is still a polishing compound it will eat the copper HSF & proc easily (lapped processor mind you)  |
|
|
|
|
|
mengsuan
|
Dec 3 2007, 09:31 PM
|
9W2NNS
|
I feel "sakit hati" when I clean the thermal paste off. I think I won't even remove the heatsink after years.  |
|
|
|
|
|
bryanyeo87
|
Dec 3 2007, 09:35 PM
|
|
|
It will only eat the compound if you rub it or clean it with tissue or other stuff other then 97% pure alcohol |
|
|
|
|
|
Zicron
|
Dec 3 2007, 09:42 PM
|
|
|
Already been reviewed by Expreviewsounds very good TIM for me |
|
|
|
|
|
mcchin
|
Dec 3 2007, 09:49 PM
|
|
|
QUOTE(bryanyeo87 @ Dec 3 2007, 09:35 PM) It will only eat the compound if you rub it or clean it with tissue or other stuff other then 97% pure alcohol hmmm now using normal TIM my surface have sum scratches already maybe from other issue but the main point is that without the nickel plating it will make mince meat out of the copper plus fixing and removing the HSF will for sure have some movement and this movement will inadvertly polish the the surface so to speak |
|
|
|
|
|
TSseanl
|
Dec 3 2007, 10:38 PM
|
|
|
QUOTE(Zicron @ Dec 3 2007, 09:42 PM) Already been reviewed by Expreviewsounds very good TIM for me didnt know they have it on the market already, the article i posted is DIY... |
|
|
|
|
|
lohwenli
|
Dec 4 2007, 05:33 AM
|
|
|
This is a cool idea, didn't realise someone already went ahead and did it. The diamond powder will only eat into the heatsink base & IHS if there is movement, so for the most part its not going to be a problem (In fact, you'll have a self-lapping, or rather self-polishing HSF+IHS if the diamond powder you use is fine enough).
|
|
|
|
|
|
IcEMoCHa
|
Dec 5 2007, 07:54 AM
|
|
|
If ur using a high powered fan on the HSF that .... what will the vibration do to the hsf and the proc? ...  |
|
|
|
|
|
lohwenli
|
Dec 5 2007, 08:09 AM
|
|
|
If both the proc and HSF vibrate together (pressed tightly together) there will be minimal effect. If both are vibrating against each other, it will slowly lap both sides, but since the vibrations from fans are not that high an amplitude, it will probably take a few months before you'll even notice anything when you take off the HSF.
|
|
|
|
|
|
IcEMoCHa
|
Dec 5 2007, 08:24 AM
|
|
|
But its not worth trying considered the price and the effects...
|
|
|
|
|
|
mcchin
|
Dec 5 2007, 01:19 PM
|
|
|
QUOTE(lohwenli @ Dec 5 2007, 08:09 AM) If both the proc and HSF vibrate together (pressed tightly together) there will be minimal effect. If both are vibrating against each other, it will slowly lap both sides, but since the vibrations from fans are not that high an amplitude, it will probably take a few months before you'll even notice anything when you take off the HSF. that if you remember to change the TIM frequently if put for like two years and the grease dried up then it be more abrasive by then you be seeing the real core without the hassle of putting in fridge and try peeling of the IHS and then can really hve the best surface contact to the core  |
|
|
|
|
|
clawhammer
|
Dec 6 2007, 06:30 PM
|
///M
|
Anyone interested to try?  We can share the cost and do it together. I'm sure it's enough for everyone's CPU. |
|
|
|
|
|
SpikeTwo
|
Dec 7 2007, 11:39 AM
|
|
|
din know diamond could transfer heat so well. LOL...
|
|
|
|
|
|
kmarc
|
Dec 7 2007, 01:42 PM
|
The future is here - Cryptocurrencies!
|
It is known that diamond is the best heat conductor. Imagine a heatsink using diamond...... Intel is using that, because of the good conductor but also because they can see through to look at their CPU..... it was mentioned in one of the reviews.....
|
|
|
|
|
|
lohwenli
|
Dec 7 2007, 02:31 PM
|
|
|
A whole heatsink made of diamond? Highly unlikely. Maybe just a thin conduction plate (more like superconduction). Diamond's refractive index is too high to really see though it without the images being distorted. Not to mention that even a heatsink made from industrially grown diamond would cost more than an entire intel factory, and finding a natural diamond big enough is  |
|
|
|
|
|
tapirus
|
Dec 7 2007, 02:49 PM
|
|
|
who want organize that bulk???might interest..  how much it cosT??? This post has been edited by tapirus: Dec 7 2007, 02:51 PM |
|
|
|
|
|
kmarc
|
Dec 7 2007, 04:30 PM
|
The future is here - Cryptocurrencies!
|
QUOTE(lohwenli @ Dec 7 2007, 02:31 PM) A whole heatsink made of diamond? Highly unlikely. Maybe just a thin conduction plate (more like superconduction). Diamond's refractive index is too high to really see though it without the images being distorted. Not to mention that even a heatsink made from industrially grown diamond would cost more than an entire intel factory, and finding a natural diamond big enough is LOL. Not a whole heatsink la. Probably a thin plate, like you said..... Look here (page 6): http://tweakers.net/reviews/740/1/chip-mag...m-pagina-1.html |
|
|
|
|
|
TSseanl
|
Dec 7 2007, 07:38 PM
|
|
|
QUOTE(clawhammer @ Dec 6 2007, 06:30 PM) Anyone interested to try? We can share the cost and do it together. I'm sure it's enough for everyone's CPU. QUOTE(tapirus @ Dec 7 2007, 02:49 PM) who want organize that bulk???might interest.. how much it cosT??? go ahead, anyone sources to get the materials? |
|
|
|
|
Quote
0.0203sec
0.62
5 queries
GZIP Disabled