Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

Technical PlayStation 3 FAQ For Beginners, anyone here like2maintain V2 FAQ thread?

views
     
manglersji
post Jul 28 2008, 12:41 PM

New Member
*
Junior Member
23 posts

Joined: Apr 2008


Hi Just Need help to setup the wired lan to PS3.

Billion bipac 5112s (streamyx combo gave this in the package)
-it is factory setup specifically for Streamyx login on PC, But in PS3 need to change alot of settings i guess.

MAY i KNOW what i need to setup in my PS3 system
and
Billion adsl router settings that need to be changed.

If able a link for a specific step-by-step guide for this type of modem and service would be helpful.
I already pening baca this and that guide until become blur already to find. Please help.
manglersji
post Jul 28 2008, 01:20 PM

New Member
*
Junior Member
23 posts

Joined: Apr 2008


QUOTE(vorchiel @ Jul 28 2008, 12:57 PM)
2 options:

A) Set the modem to router mode. It will dial automatically to streamyx (without dialling using OS or PS3).
http://modemsupport.blogspot.com/2007/06/b...figuration.html
If you have a network switch, this will allow the PC & PS3 to connect to the internet at the same time.

B) Configure the PS3 to use its built-in PPPOE dialler. This setting can be found on XMB (it's self explanatory and quite intuitive)
You have to change the network cable manually though to switch between PC & PS3.
*
You mean bridge mode? No need to do any port forwarding / Setup it to be Static IP address. (i confuse this part)
I'm connecting direct, not using PC. Setup the billion adsl route of course i use PC.
But later la that one, i want to learn setup direct, then i do the PS3 and PC connection simultaneously.

And confirm we use PS3 to use its PPPOE dialler ya. And there is no Proxy Server? Sorry la, very noob in ADSL / ROUTER subjects.

Meaning, if i were to directly connect the ADSL Router to the PS3, what mode should i setup the Billian Bipac 5112s? Because by default it is bridge mode.

This post has been edited by manglersji: Jul 28 2008, 01:37 PM
manglersji
post Jul 28 2008, 01:42 PM

New Member
*
Junior Member
23 posts

Joined: Apr 2008


QUOTE(vorchiel @ Jul 28 2008, 01:23 PM)
Okay sorry I misunderstood your statement earlier. If it is already in router mode, you can just set the PS3 to use autoconfig DHCP. There is no need to use PS3 PPPOE dialler anymore. And enable uPnP on the router & PS3 so port forwarding is not necessary to be set up. However if you still get NAT type 3 after successfully connected, then you have to set port-forwarding.
*
But my NAT in the ADSL Router is stated Deactivated.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0371sec    0.50    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 06:15 PM