(1) CREE XR-E LED Upgrade lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- CREE XR-E LED : http://www.cree.com/
- Featuring the latest Cree Xlamp XR-E emitter: http://www.cree.com/products/xlamp7090_xre.asp
- 3.6 to 4.3 Volt input (1x Li-Ion batteries)
- Fully regulated electronic cirquit for constant light output throughout the battery life
- stippled (orange peel) aluminium reflector fo extra smooth beam
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
SOLD OUT



(2) CREE XP-G LED Upgrade lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- CREE XP-G LED : http://www.cree.com/
- Featuring the latest Cree Xlamp XP-G emitter: http://www.cree.com/products/xlamp_xpg.asp
- 3.6 to 18 Volt input (1x to 4X Li-Ion batteries)
- Fully regulated electronic cirquit for constant light output throughout the battery life
- Digitally regulated 5-modes: Hi / Mid / Lo / Strobe / SOS
- stippled (orange peel) aluminium reflector fo extra smooth beam
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
RM80 per unit



(3) CREE XM-L LED Upgrade lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- CREE XP-G LED : http://www.cree.com/
- Featuring the latest Cree Xlamp XP-G emitter: http://www.cree.com/led-components-and-mod...ional/xlamp-xml
- 3.6 to 18 Volt input (1x to 4X Li-Ion batteries)
- Fully regulated electronic cirquit for constant light output throughout the battery life
- smooth aluminium reflector fo extra throw
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
RM80 per unit



(4) CREE MC-E Quad-Core LED Tri-Mode Upgrade lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- CREE MC-E LED: http://www.cree.com/
- Featuring the latest Cree Xlamp MC-E emitter: http://www.cree.com/products/xlamp_mce.asp
- maximum 4.2 Volt input (1x Li-Ion battery)
- Tri-Mode electronic cirquit - Hi / Lo / Strobe
- stippled (orange peel) aluminium reflector fo extra smooth beam
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
SOLD OUT



(5) IR Infra-Red 3W Tri-Core LED lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- Featuring IR Infra-Red 3W Tri-Core LED
- maximum 8.4 Volt input (1x to 2x Li-Ion battery)
- Fully regulated electronic cirquit for constant light output throughout the battery life
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
RM60 per unit



(6) 365nm UV Ultra-Violet LED lamp assembly module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly.
- Featuring UV Ultra-Violet 3W LED
- 365nm light specturm (much better than 395nm at detecting money note)
- 3 to 8.4 Volt input (1x to 2X Li-Ion batteries)
- Fully regulated electronic cirquit for constant light output throughout the battery life
- no more worries about bulb burning out, dropping your flashlight. LED are rated for more than 100,000 hours runtime
- head diameter: 26mm
RM99 per unit



(7) 26mm Smooth aluminium reflactor upgrade for above "(1) CREE XR-E LED Upgrade lamp assembly module"
- fits (screw in) directly to the above item "(1) CREE XR-E LED Upgrade lamp module"
- produce more tight and intense hot-spot than the stippled/orange peel reflector, at the expense of more beam artifact
- fully plug & play
SOLD OUT



(8) 3.7Volt 10Watt Xenon lamp module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly (see battery configuration below)
- compatible with 1X CR123A 3.0V non-rechargeable lithium, or 1X RCR123A/16340 3.0/3.6V/3.7V rechargeable lithium-ion, or 1X 17500/18500/17650/17670/18650 3.6V/3.7V rechargeable lithium-ion
- High pressure xenon gas filled bulb
- stippled (orange peel) aluminium reflector for extra smooth beam
- smooth round beam (unlike original surefire with oval/egg shaped beam)
- about same brightness as surefire P60
RM10 per unit


(9) 7.4Volt 15Watt Xenon lamp module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly (see battery configuration below)
- compatible with 2X CR123A 3.0V non-rechargeable lithium, or 2X RCR123A/16340 3.0/3.6V/3.7V rechargeable lithium-ion, or 2X 17500/18500/17650/17670/18650 3.6V/3.7V rechargeable lithium-ion
- High pressure xenon gas filled bulb
- stippled (orange peel) aluminium reflector for extra smooth beam
- smooth round beam (unlike original surefire with oval/egg shaped beam)
- about same brightness as surefire P61
RM10 per unit


(10) 9.0Volt Xenon lamp module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly (see battery configuration below)
- compatible with 3X CR123A 3.0V non-rechargeable lithium, or 2X RCR123A/16340 3.6V/3.7V rechargeable lithium-ion, or 2X 17500/18500/17650/17670/18650 3.6V/3.7V rechargeable lithium-ion
- High pressure xenon gas filled bulb
- stippled (orange peel) aluminium reflector for extra smooth beam
- smooth round beam (unlike original surefire with oval/egg shaped beam)
- about same brightness as surefire P90
RM10 per unit


(11) 14Volt Xenon lamp module
- fits surefire flashlight with P60/P61/P90/P91 lamp assembly, or other flashlight using D26 or similar lamp assembly (see battery configuration below)
- compatible with 4X CR123A 3.0V non-rechargeable lithium, or 4X RCR123A 3.0V rechargeable lithium-ion, or 3X RCR123A/16340 3.6V/3.7V rechageable lithium-ion, or 3X 17500/18500/17650/17670/18650 3.6V/3.7V rechargeable lithium-ion
- High pressure xenon gas filled bulb
- stippled (orange peel) aluminium reflector for extra smooth beam
- reflector design for massive flood with bigger hotspot
- smooth round beam (unlike original surefire with oval/egg shaped beam)
- brighter than surefire P91 (will start a fire if accidently left running on a piece of paper!!)
RM10 per unit

xenon lamp modules measurement: head diameter: 26mm, body/mid section diameter: 19.4mm, total length including spring: 36.3mm, length excluding spring: 20.8mm





(12)Digital Light / Lux Meter (200,000)
Features:
- New generic 200,000 Lux Digital LCD Pocket Light Meter Lux/FC Measure Tester
- High accuracy wide measuring range
- Automatic measuring level selection
- Maximum and Minimum measurement
- LUX/FC unit selection
- Data hold
- Data automatic recording
Specifications:
- Color:Black and Red
- Measuring Range:2000/20000/200000 Lux ;200/2000/20000 Fc
- Resolution:1 Lux/0.1FC
- Accuracy:± 4% ±10dgts(<10000Lux)
- ± 5% ±10dgts(>10000Lux)
- Repeatability:2 times/Second
- Measuring Level Selection:by Hand or Auto
- Power Supply: 2 Pieces AAA batteries (not included)
RM50 1 unit





All are brand new items. stock readilly available in hand. i'm located in kota kinabalu sabah. payment can be made to my maybank or public bank account. item will be posted out with poslaju or pos daftar, depends on buyer's request. poslaju fees: to west/peninsula malaysia RM14, sarawak RM14, sabah RM8. pos daftar fees: RM4 to RM6 (depends on actual weight) whole malaysia. poslaju 1 to 3 working days delivery. pos daftar 4 to 7 working days delivery. both are safe, with tracking number provided and need receiver's signature.

to order, please send me your mailing name, full address with post-code, a valid telephone number, which item you want to buy, quantity of item, your shipping choice (pos daftar or poslaju). i'll send my bank details to you upon your order confirmation. payment can be made to my maybank or public bank account through any online transfer, atm transfer, atm cash deposit, bank counter cash deposit, cash deposit machine, etc. kindly pm me the exact amount paid, as soon after you've made payment. item will be posted out as soon, after the fund is transfered. thanks in advance.

any question, please pm me directly.

This post has been edited by petunia: Apr 8 2022, 11:21 PM

Order sent yesterday, received today. I'm a satisfied customer.

The beam is really good, it's round as specified, not deformed as my other brand light assembly. Slightly bigger spot than Surefire P60 but brighter spill. Peak brightness belongs to P60 though. All this tested inside my office with lights switched off. Can't wait till it's dark ;-)

Received (1) CREE XR-E LED Upgrade lamp module, it can use on my WOLFEYES M90 torch directly and got very good working condition and bright....

Cheers...

I have upgraded CREE XR-E LED Upgrade lamp module to my SureFire 6P. So greet.

does it fit my surefire C3...running on 3 CR123

cheers

do u have any lamp module that fits the Pelican M6 LED though?

Fast service, ordered one flashlight last friday and seller posted the item on the same day

Do u sell new G2 LED n how much?
PM me.

---

Added on June 21, 2008, 1:54 pm sory i mean new flashlight.

This post has been edited by ain666: Jun 21 2008, 01:54 PM

hi I have a coleman normal bulbs torchlight can I change the bulbs to LED? where can I get the bulbs? how much is that?

halu,




1)i'm interested 2 buy the surefire 6volt P61 high intensity (120 lumen) lamp/assembly
2)did u have it this model?
3)how much?
plis reply me ASAP


TQ

This post has been edited by sidiwyte: Jun 6 2009, 08:06 PM

Received the CREE XR-E LED Upgrade lamp module on the 17th June 09. Tested on my Surefire 6PL and working good and brighter than the original Surefire LED. Thanks

---

Added on June 23, 2009, 10:44 amDo you still have

7.4Volt 15Watt Xenon lamp module
26mm Smooth aluminium reflactor

Is it easy to install the smooth reflector?

Pls PM me if you have stock. I need 2x Xenon lamp assmbly and 1 smooth reflector. May need to buy another Cree Module as well, since I am happy with the last one I purchase from you

This post has been edited by zainalklj: Jun 23 2009, 10:44 AM

(4) 7.4Volt 15Watt Xenon lamp module
(5) 9.0Volt Xenon lamp module
Received today, thanks. Nice seller. Good response time. Will deal again.

do u have the surefire flashlight wit the body? need a new set ^^ pm me pls

hi bro !
my name is edmund ee 012-2966651
i would to purchase the surerfire g2 bulb !
which 1 u recommed ?
3.7Volt 10Watt Xenon lamp module or 7.4Volt 15Watt Xenon lamp module ?
pls get back to me thank u freind !

Which one can be use with Fenix E20?

does any of these fit a mag lite?

Hi, do you sell Luminance meter that measure cd/m2 ???

Model: Minolta CS-100 or any brands will do

PM me if you have... quote me price too

need it for my research,

thanks

hi do you have CREE XM-L2 U2 LED (Cool White) for eagtac p20C2 MKII

Hi, your upgrade LED lamp can fit Mag Lite 3D torch light?