Just now when i wwnt keluar korong to main road...
When i press pedal...
It feel no power and the "AT" show on my dashboard....
I fast fast find place to stop and restart tge engine..
After restart the light no more...
What happen?
Gearbox problem?
Mainboard problem?

Thanks...

Gearbox having issue. Better to get it checked before something worse happens.

after restart no more light...
go outside workshop can check?
how they check cos dont get con....

gearbox expensive?

obviously relate to gearbox. cucuk obd scanner baru tahu

Understanding the AT Light on Your Car Dashboard

The AT light, or Automatic Transmission light, is an important indicator on your car's dashboard. It signals issues related to the automatic transmission system.
What the AT Light Indicates

Transmission Problems: The AT light may illuminate if there is a malfunction in the automatic transmission. This could include issues with the transmission fluid, overheating, or internal component failures.

Fluid Levels: Low transmission fluid levels can trigger the AT light. It's essential to check the fluid level and top it off if necessary.

Overheating: If the transmission is overheating, the AT light will come on. This can happen due to excessive load, low fluid, or other mechanical issues.

What to Do When the AT Light is On

Check Fluid Levels: Inspect the transmission fluid level and condition. If it's low or dirty, consider changing it.

Pull Over Safely: If the light stays on or starts flashing, pull over and turn off the engine to prevent further damage.

Seek Professional Help: It's advisable to have your vehicle inspected by a mechanic as soon as possible to diagnose and fix the issue.
------------------------------------------

Those are what I get from AI response but there are short video about this on tik tok wahtever.

The problem can be just due to dirty sensor. I guess indication of overheat. They just take out the sensor and clean it and problem goes away.

This post has been edited by Zot: Feb 25 2026, 09:40 AM

AT fluid just change before cny....
Only this time the AT light shiw up...
For now when i start car,
The light no more...

Did you check the atf oil after the service? If the atf at the correct level should be fine

If the light no more i guess nothing to worry about but i do suspect the problem might be the automatic gearbox sensor

The sensor expensive?
Just incase the workshop cincai ask me change...

You can survey thru shopee, just type myvi at sensor, pm the seller to check compatibility with your myvi before proceed with the payment