mini mobo + what gpu?

Delete.

This post has been edited by samftrmd: Jul 16 2025, 03:30 PM

Hnnnghhhhh

weird looking cat

what GPU is that?never see b4

does it light up like lianli

not gpu, its prolly a WIFI PCIE card

Micro ATX with 1060?

Big..Everest.....

Yep. And it blocking air flow to GPU. Better just line Glan port.

how to fit?

airflow macam very shitty lol

Need to put in rear push fans first, the 24 pins, then aio with pull fans, insulate the screws that touch the mb bottom, usb 3.0 cable, then finally, gpu.



With the aio push pull, air flow is not the issue, future diagnostic and maintenance will be exhausting lol

This post has been edited by samftrmd: Jul 17 2025, 04:08 PM

wifi card so big ada heatsink lagi?

im noob, can you sketch the air flow in the case.

better undeerstanding if 3d render

not until 3d render la.
got back fan, usually exhaust, got bottom and that radiator fan, which direction the air flow.

Different casing different components, will have different optimum airflow configuration, in different environment.
A simple way to follow is use fan ports that have dust filter as intake, without as exhaust. Of course, that also have to put into consideration on air flow pressure, direction, and operating environment. To reduce dust build up, a positive air flow pressure system is preferred. If dust is not an issue, a negative air flow pressure system might be preferred.
In this particular casing, the side and bottom fans are intake, with rear as exhaust. Ideally, the airflow should flow directly from front to back without changing direction.

thank you for the explanation. thinking of building SFF for years.