Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 water filter and water tap question

views
     
WaterBuffalo
post Feb 27 2025, 02:11 PM

Getting Started
**
Junior Member
71 posts

Joined: Sep 2018
QUOTE(gashout @ Feb 27 2025, 08:37 AM)
I plan to install a pull out water tap... and the renovation guy says cannot fix the water filter head to it...

I am currently using https://encrypted-tbn0.gstatic.com/images?q...hpJuikNGexcgw&s panasonic water filter...

he recommended to connect to a small pipe at the corner left upper end sink... can i ask which brand of water filter should i buy then?

i just need a simple one actually. thanks for helping.
*
I was also sourcing around for undersink mounted, drink from tap filter. Another consideration is whether you want hot and cold water settin, and whether you want maintenance free filter.

If both is not needed, I recommend Bacfree. Can see their line up in Shopee. They also provide installation. They had to core my quartz stone counter top to install the tap. Overall satisfied with the quality and installation.
WaterBuffalo
post Feb 27 2025, 02:21 PM

Getting Started
**
Junior Member
71 posts

Joined: Sep 2018
QUOTE(gashout @ Feb 27 2025, 02:14 PM)
Thanks for the recommendation

I saw bacfree and also 3m.
Bacfree is pricier and on sink
3m is cheaper and under sink

🤔
*
If I recall correctly I bought the 1.6k one with installation option. Single filter. The filter is installed under the sink, but they will install a small tap on the counter top. Hence, the bulky filter is hidden under the sink and inside the cabinet.

When I was shopping around I think I saw this one 3M model, same design but with 2 stage filter and LED filter life span indicator. It’s around 1.8k but no installation included. I didn’t go with this as it’s 2 filter which means you need to replace 2 at one go and there’s the battery for the LED which you need to replace periodically.

But again, like I say, consider those factors, then it’ll be easier to decide.

This post has been edited by WaterBuffalo: Feb 27 2025, 02:23 PM
WaterBuffalo
post Mar 1 2025, 06:56 PM

Getting Started
**
Junior Member
71 posts

Joined: Sep 2018
QUOTE(gashout @ Mar 1 2025, 03:39 PM)
do you all know how much roughly is it for the water pipe to be modified.. something about putting kitchen cabinet, so the pipe needs to move lower etc. something about drill a bit on the tile...

the plumber is charging me rm500 to do the work...he was at my place just for 2 hours... then he will charge me again when the kitchen cabinet is being installed.
*
I can’t answer for other plumber but since I got it from Bacfree, everything was done by them. Coring of the quartz stone countertop, plumbing work, materials, and installation labor.

In terms of material, I think there’s hoses, a joint to split the water supply between the kitchen sink faucet to the water filter faucet, and the small faucet for the water filter.

 

Change to:
| Lo-Fi Version
0.0163sec    0.23    6 queries    GZIP Disabled
Time is now: 8th December 2025 - 09:30 AM