Curve glass.


The top panel is slightly raised, the dust filter is not removable from the panel.


Top mounting rack is removable.


Already comes with fans installed. Other than the bottom and rear fan port, all mounting rack is removable. The side and bottom fans are reverse blades.


The back panel is filtered, but the filter is not removable from the panel.


Another removable metal panel for hdd.


More hdd port.


Easy to plug in front panel connector.


Raised psu space for cabling.

This post has been edited by samftrmd: Feb 22 2025, 10:25 AM


Attached thumbnail(s)

usually it took how long for you to finish pasang 1 pc?

Around 1 hour. Sometimes more if it has lots of fans.

Curved glass lol... Oh no no no..

after build in one fish tank like it alot, so much easier to build in because of the large opening everywhere

you no invest in a electric screw driver set?

I use a couple before. The cheap ones (RM 30 plus) won't last. Expensive ones, I don't feel like spending that much.
Using a cheap one that don't have torque lock can be problematic if over tightened. I have 2 screw drivers. One with strong tip that can grip, another tip that can slip to avoid over tighten.

what screwdriver is this? can tell me the brand and where to buy?

Those cheap ones Mr DIY got. For more expensive ones, I recommend ifixit.
If you going to use it for just your own build, no need expensive ones. The one I used spoiled due to wear and tear. I assemble hundreds every month. For just a few builds, a cheap one should be good enough.

This post has been edited by samftrmd: Feb 22 2025, 07:46 AM

how much

Don't know price. I pasang only.
However, given the type of casing it is. Even though it is not a tier one brand, it would not be cheap. These kind of casing is meant for showing off. Not practical. The price would reflect this.

This post has been edited by samftrmd: Feb 22 2025, 09:27 AM

Comes with argb and fan hub. This hub uses 2 sata power cable.


This post has been edited by samftrmd: Feb 22 2025, 09:30 AM

uni time i buy the cheapest casing and dump all the money to Riva TNT 2 Ultra (RM500 plus)

still remember the joy I buy parts and build my first pc

This post has been edited by yehlai: Feb 22 2025, 09:37 AM

I got cheap one but wanna find got magnet one but ifixit expensive lol

My first Pentium 166MHz casing, I ditch it and leave the pc bare open. Using a table fan to cool it. My mum use the casing as a modified stove. The casing cover is still being used to this day lol

Just buy a magnet from lazada and stick on it. That's how is use it.

It comes with curved mesh replacement.

Additional hdd rack and screw box.


Within the screws box, there are these usb and audio jack rubber cover.


The box clearly tells which screws are for what.



This post has been edited by samftrmd: Feb 22 2025, 11:19 AM

eh didnt think of this idea..thanks bro hahaha

not bad eh the price for this case at around RM500ish