Process - AMD Ryzen 5 5600x 6core 3.5mhz rm650
Ram - Kingston fury 32gb - rm360
Motherboard - Gigabyte b550m ds3h am4 ddr4 - rm435
psu - cm mwe bronze v2 550w - rm220
case - cm elite 500 atx case - rm175
ssd - kingston kc3000s 1tb - rm440

- so far total cost is rm2280

what graphic card should i put in... suggest please

rtx5090

rtx 4070 or rx 7700 xt

The psu will up in smoke

Severely bottleneck by CPU lol

Your ssd why so expensive? Can get 2t adding 30bucks n m2 ssd somemore.

Your Ryzen also alamh alang menyeluk pekasam

Where you get the price? Why everything so expensive!

Budget kan ? Hahaha

Suggest 750W power supply just in case.

You haven't factored in casing fans yet. Usually only come with 1 fan. You need at least another 2-3 pieces.

Your motherboard no ARGB header. So if you buy ARGB fans will be useless as cannot control from motherboard software. If keep it cheap, buy non RGB fans.

The kingston drive must be Kc3000?
Kingston Renegade is cheaper and almost same performance.

Your DDR4 Fury is RGB?
Non RGB FURY BEAST D4 16GB 3200mhz RM120 per piece. (C-Zone)

Total pricing is abit on the expensive side, BTW you DIY or they pre-assembled for you ?

You should DIY to further save cost on labour, source the parts individually from each Low Yat shops...

- Mainboard is Micro ATX size, for better expandability, get normal ATX size.
- Also go for Full ATX Tower Casing.
- PSU is too minimum, go for 750W or 800W or even higher, since you have plan to add Graphics Card.
- RAM is acceptable.
- The SSD is acceptable, but consider getting a normal HDD like SATA 1TB HDD for normal data storage, recommended but optional.
- As for the Graphics card, get a decent RTX series like RTX 4070.


Hope this helps...

Thanks bro

Decent specs. If you go for higher specs, be prepared to pay for the hefty electricity monthly bill.

Decent spec for me but if it's already good for you then just stick to it 🙂🔥