OC problem..., After RAM upgrade...
|
|
  Nov 7 2007, 11:58 PM, updated 19y ago
Return to original view | Post
#1
|
 
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor   
|
After i added 2GB crucial ballistix 6400 RAM with my 1GB corsair xms2 6400... I cant seem to OC over 2.5GHz...
 Before that with only 1GB xms2 i can reach 3.6GHz no prob... Now cannot POST if higher than 2.5GHz... Also tried running with 5-5-5-18 timing ... They r running 1:1 DRAM:FSB ratio... Do i need to increase anything after adding RAM?... My comp specs r on my sig...  This post has been edited by IcEMoCHa: Nov 7 2007, 11:59 PM |
|
|
|
|
|
Nov 8 2007, 07:55 AM
Return to original view | Post
#2
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
lol... Hold on i try ....
Added on November 8, 2007, 8:46 amUh... the XMS2 was holding up the other RAMs... But why more RAM harder to OC?... This post has been edited by IcEMoCHa: Nov 8 2007, 08:46 AM |
|
|
Nov 8 2007, 01:19 PM
Return to original view | Post
#3
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
Why is it my memory benchmark is lower than when Im using 1GB XMS2 RAM?... Currently using 2GB Crucial Ballistix Tracer 6400... The latency also increased...
Here are the results: With 1GB 6400 XMS2 RAM  With 2GB Crucial Ballistix Tracer 6400  This post has been edited by IcEMoCHa: Nov 8 2007, 02:19 PM |
|
|
Nov 9 2007, 12:11 PM
Return to original view | Post
#4
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
I see... Thanks for ur advice man... 1 more question... My CPU Vcore dropped from 1.34 to 1.32 when running orthos.. Is it caused by the PSU or the mobo?...
|
|
|
Nov 10 2007, 09:29 AM
Return to original view | Post
#5
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
I think its the PSU... Because it fluctuate only under full load... And when it fluctuate the system becomes unstable...
|
|
|
Nov 10 2007, 07:46 PM
Return to original view | Post
#6
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
I will try changing the PSU.. getting acbel digital PSU.. Is that good?
|
|
|
|
|
|
Nov 15 2007, 11:30 AM
Return to original view | Post
#7
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
Whats causing this? PSU or mobo?... Fluctuate(range from 1.18 to 1.31v) like crazy even without load... Sometimes only... The vcore shud be 1.35 which i set in the bios...
 This post has been edited by IcEMoCHa: Nov 15 2007, 11:32 AM |
|
|
Nov 19 2007, 09:24 AM
Return to original view | Post
#8
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
QUOTE(-pWs- @ Nov 19 2007, 06:18 AM) Do you disable your EIST and C1E functionality??? Something is wrong with this mobo's firmware... Enabled or disabled no effect ... lol... But only sometimes the voltage fluctuate like that... After i restart it then no more...-pWs-  This post has been edited by IcEMoCHa: Nov 19 2007, 09:25 AM |
|
|
Nov 20 2007, 11:05 AM
Return to original view | Post
#9
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
1.55v? O_o... I lowered my clock to 3.4Ghz now... 1.34v only.. Its stable...
|
|
|
Nov 22 2007, 09:34 PM
Return to original view | Post
#10
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
Latest adi...
 |
|
|
Nov 22 2007, 09:39 PM
Return to original view | Post
#11
|
|
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor
|
=.=... its the firmware problem...
|
| Change to: |  0.0209sec
 0.90
 6 queries
 GZIP Disabled
Time is now: 1st December 2025 - 11:03 AM |
Quote