Dear All,

I just changed the tail lamp for my Toyota Zenix, I noticed that the turning light becoming very fast.
Rear and Front also. My tail lamp just n plug n play, no wiring cutting. Does it will cause any issue ?

May I know anyone encounter this issue? any solution ?

Please refer to video attached

thanks in advance.


Attached File(s)
 IMG_1173.mov ( 16.08mb ) Number of downloads: 51
 IMG_1174_2.mov ( 13.26mb ) Number of downloads: 21

Bulb correct type or possible relay issue?

Hi friend,
all my lights are LED ? u may refer to my video , what kind of relay issue?

Thanks

Did you change the tail lamp at Toyota SC ?

no I change it at accessories shop

It is not compatible with Toyota system. Only original Toyota parts can work.

There's your problem

LED consumes less power than halogen, and thus the car thought your bulb is fried and will blink fast to indicate as if you having missing or burnt turn signal bulb(s)

hi boss, all my lights are LED , if that case , got any solutions?

how come others can work ?

Go bring back to the shop you changed. We cannot help you.

usually denotes a malfunctioned signal bulb. in your case, faulty unit perhaps? bring back to the shop

good signal leds have designs to mimic bulb resistance so that it works properly... yours probably don't des why...

Turn faster

When they are selling things it will appears to be like it's working.
The small prints will be warranty for 1 month or 2 or max 3 months.
Many have tried and when the problem appears, switching back to original stuff, the problem seems to go away.
I suspect it's has to do something with it's incompatibility with Toyota CANBUS system.
To avoid the problems what others had gone through, I don't do any of those stuff and just maintain my Toyota in it's original form.
So far everything is good.

incompatible spec

go back to the accessories shop, usually they can easily fix this by adding relay, or change to another spec or bla3 to fix it.

thanks guys, the seller said the box come with missing resistor, they will courier to me, hopefully it can fix the issue

If the originals are normal bulbs and u change to LEDs, it is normal. U will need to change it back or add a 50 ohm resistor between both + and - wires for each signal light sockets. All can order from online and DIY.

I did this for old Triton previously. No problems. The LEDs lasted so I sold the car.