Slightly larger than itx but can fit matx


Very short, almost no bottom feet. Recommend to seal off all bottom holes to reduce dust.


Don't know what this small side panel is for.


Since there is no side fans, this back panel mesh seems unnecessary.


2 kedekut zip ties.


1 reuseable pci cover while the rest is tear offs.


2.5"


3.5"


Recommend to further manage the casing cables to prevent it getting into the front fans.


Lousy casing fan's frame.


Disappointing front panel i/o


The PSU is at the top and there is no fan port there. The air flow is concentrated from front to back. It is a plus point for me.


Not much space for cabling.



Overall, this casing shouts compromise with cost. The good thing for me is the small size and direct air flow from front to back. But, even that is interrupted by the unnecessary back panel mesh. The back side is not deep enough for cabling. So, much of the psu cables can't be consealed behind.
The casing seems sturdy and not flimsy.

This post has been edited by samftrmd: Jul 11 2024, 10:52 AM

Not much space for GPU power and 24 pins.


If don't want to pull cables from the top side, which is too noticeable, need to pull cables from this hole first before mounting the mb. Which means, if I need to change psu, I need to remove mb first.
This alone mKes me decide to not use this casing for my own build.

No need to see behind cabling lar lol

looks cheap.

This is such a cheap feeling case that you would not use yourself yet you will give to your customers. Err whut?