wahhh ur cpu score 5k....im sure its quadcore Oced more than 3.0ghz...

zzzz 3.6ghz summore slightly OC ah.... u mean ur GC slight izzit??? wats the clock u OC to get that 14k???? screenie ler..

u mean ur GC or CPU have alot of room to OC..... Q6600 at 3.6ghz is extreme already.... Zzzzzzz i feel dont have much rooms to OC anymore... unless u wanna take high risk

not yet
both cards has been flashed
to a better bios than the ssc.. the xfx ADE XXX...
y better the ADE XXX bios doesnt suffer the problem of depreciating performance when u keep overclocking even though its artiact free...
the SSC has that bug... the ADE XXX bios are newer.

test it.. it was debated quite heavily in XS..

My memory doesn't overclock very well. For the moment I leave it at 950MHz (1800MHz) in order to make sure that it won't give me instability. Once I found the max on the core and the shaders, I'll OC the memory.

But from the first result I have, it seems the memory is unstable over 993MHz (1986MHz). It is slightly under the result I had with the stock cooler (1000+MHz). It might be due to the 2 memory chips under the HR-03 GT heatpipes. The heatsink provided for them are tiny because the heatpipes are just on top of them, so maybe the cooling capacity is slightly worse than with the stock cooler. It doesn't really matter since the performance increase when OCing the memory by few MHz is barely noticeable.

800 MHz is definitely possible, the hr-03 GT can handle the heat easily. From my first testings, I think I should be able to do around 840MHz core and 2100 MHz shaders at 1.3V and it should be fully stable in games. 

wow..so high.

i OC to 720core and 1000memory..temp reached 72c on load.    the PCB is so freaking hot, can fry egg 

what card? stock cooling?

if i use ATItool scan artifacts...it can go up to 72c load.    (stock cooler, vcore mod)

What cooler are you using? Battle Axe?

supercharged    , addition 5400rpm fan X2  ?

if not mistaken, its the vcore jumper 

with stock cooler, temperature is ur limit... no point adjusting ur vgpu if its too hot... stock cooler shud be able to go 700mhz core and 1000mhz mem easily...

Guys, how to adjust my vgpu on Galaxy 8800gt without vmodding ? The jumper can be used ?

Haha later if something happen then I have to use my integrated for a long time haha. Better wait for someone who owns this card to explain first.     

Edit : Im able to run 650/2000/1625 already and stress it for almost 8 hours without fail ( The reason I stress so long is I was asleep last nite so forgot to turn off ATItool during stressing) haha.