shouldnt be a problem there.. but why it change often?? when u playing game.. ur card shud be hot and ur fanspeed too shud be high all the while to maintain the temperature.... unless u alt+tab often then it cools down..... make sure u do the profile correctly... here is 2 links for the guide http://www.guru3d.com/article/article/449/ and http://www.vaguesoft.com/users/dwood/blog/...ials/rivatuner/

This post has been edited by vincentlaw: Mar 14 2008, 01:16 PM

how about just fix the fan speed at 70% , adjust fan speed by ur self , after playing game just turn back 30% .. IMO

this way is abit tedious in long run..

i installed accelero s1 on my 8800gt... highest i could run stable is 745core and 1000mem... not enuff voltage to push higher.... the load temp is around 55... idle at 40...

what fan you use on the S1?

55C is a very good temp. What software are you using to stress test the GPU?

only a PCI blower to blow it... I used atitool and scan for artifacts and run 3dmark06 2rounds...

btw bro did u tried to flash ur 88gt bios with modded bios??
my fren flashed his pny 88gt bios with modded inno3d 88gt in which the gpu vcore is 1.22v as opposed to the stock 1.1v

I am wondering if there is any modded bios with higher vcore... anyone?

i also just get one Accelero S1 rev 2 for my Enno3D 8800GT OC edition...
idle temp just 35c ~ 37c
load temp 45c ~ 47c..

anyone know where can i get bios for my GC that already modded and tested ok?

I edited the bios to 1.15v but there is no difference... seems like 1.1v is the limit of bios modding ...

Try 1.25v and see .Wait 8800GT RMA back then time to show some benchmarking score

Hello,anyone here own Gigabyte 8800gt with zalman fan version?
Anyone tried oc it? How was the result? Is there still available headroom to oc?

is this score normal for such minimal OC?..




Attached thumbnail(s)

Is your system stable at that speed? Sometimes if it's not stable, you get a lower score. My E8200 @ 4.01Ghz gives +/- 14920 3dmarks.

my albatron 8800gt:
core 715
shaders 1787
memory 950

stock fan
idle 53c
load 60c>(when ati tool reach up 75c)

is this temp still can be accepted?

These graphics card can get very hot and 75C isn't a good number so you might want to invest on 3rd party cooler?

yea,but usually when i play games(GoW,PES2008 etc) my loads temps is around 59-60.cuz i had my fan profile to run on 100% when in load (62c^) . on idle my fan running at 68%. that's how i keep my card stay a bit warm,not so hot la . coz i see in other forum like in guru 3d they say this card is a good temp handler. so 55-60c is normal.
somehow i thinking of 3rd party cooler since i wanna increase my clock more.
and i cant seems to increase my memory clock more than 950.any idea?

This post has been edited by wan_d7: Mar 18 2008, 11:33 PM

im using it..
this card is very good imo..
if u want to unleash the card's true potential..
u just have to download the gamer hud software from gigabyte's website..
this software allows u to change the vgpu so that u can oc it higher..
from my experience.. at 1.1v the max atitool stable SP oc is 1782mhz, 1.15v 1836mhz and 1.2 is 1890mhz...

oh....i see then,im not so dare to tried oc it,scare it will be too hot after it,this is also because my house quite hot,no air-cond one.

by the way,im using the gigabyte 8800gt with zalman fan one.are u using third party cooler? or just stock zalman cooler?whats the temp after u oc the card?