Similar to Nvidia gpu, it has opening on the metal back plate for air flow as well.

Yes. Other than the thin heat spreader for a chipset heatsink, it is very adequately equipped.
ARgb, wifi, shielded pcie slot, USB type c, even has 3 fan plugs.

yes correct, i think only threadripper and x299 supports quad channel

Other than the GPU, it doesn't comes with anything at all. Not power cable spilter, no logo, don't even has a user manual.

good like this, previously using palit also ok

happy what i paid for

Evolv shift 2

Instead of metal side panel, it's fabric covering a plastic frame. The fabric is glued on, not readily removable for cleaning.


Top panel is also has a filter, not readily removable as well. The panel is push-release spring loaded.


Only 2*usb3.0


Gen 3 cable only.


Only power button, the other 2 are for argb.


Comes with 1 fan.

How's the bios, easy to use?

Just for upgrade ability in case ram gets even cheaper

I think it's still big right? Problem is GPU too big

4060 LP is great invention

Itx should pair with 4060lp

You remind me that I hate itx because it only have 2 NVME slot


I always think this type of installation reduce GPU performance

This post has been edited by vapanel: May 23 2024, 05:46 PM

Later I share bios picture.

Need to further tidy up the casing cables.

Nice. The 16gb a770. Although its a bit overpriced for our market


What MB would you suggest for a b650m bulld? Somewhat decent for a budget build

https://www.msi.com/Motherboard/MAG-B650M-MORTAR-WIFI

I like the chipset and vrm heatsink. Also, a slightly better audio chip.
I just bought it's B760m variant.
Remember to check ram qvl before you buy.

Not much room for cables. Very bad design.


The radiator position is on the lower part of the casing. Meaning the pump will be at the tallest point...

This post has been edited by samftrmd: May 23 2024, 06:16 PM

Ahh the mag mortar. I was actually looking at asrock b650m pro rs wifi with predator pallas II 16x2 cl30 6000. Now that i checked its not on QVL list. Thanks for the reminder bro

This post has been edited by knazlee: May 23 2024, 11:28 PM

the issue with mITX is as usual the pricing

youre paying more for less

ive gone thru mITX also, it was great until you realised more shortcomings than good ones

Get moved to this graveyard forum again...

Too late.

I actually don't feel like continue in this thread anymore, but I just want to comment on the casing.



I think it's previous design is much better. Material used are more premium. This casing design seems to not account for the tubes and cables.
The 2*2.5" is too close together and the opening is also too close the the tray. The SATA cable will need to be bent on the near plug, which is very damaging.
As shown in the picture, the tubes need to be twisted to fit in. Various fan cables are too close to the fan.
Almost no consideration in the design for the psu cables...

I will avoid this casing for my own computer.

it seems /k mods dislike u in some ways since they seem to be specifically targeting ur build threads

nope. x79 and x99 also can do quad. x58 only do triple channel.