64GB around a week is common for older models, newer models need at least 128GB.

For those who change outdoor cams often (within housing compound), you can just use wall fan plates and brackets/sofa interlock instead of drilling holes on the wall/awning, then hide the setup with junction box.

Brah gotta be careful, cable ties can loosen and brittle overtime

Maybe this week I go back home I'll show photo

One plate drill to wall, another plate (hook) screw on the camera hole, so just snap together. So in case you need to replace new cam, just remove the the plate from old cam and attach it to new one

If I got go back home I'll share some pics

EC5 user for 3 years, still working fine. My backlane is shaded, but the cam is not covered since I attached it to lamp pole outside.

chupapi_munyayo

I got went back to my shop but forgot to take photos, so here's one in my home

Using wall fan hooks, i used the bottom screw hole and it can be slightly higher. Outdoor ones like CW400, CW300, EC5 installation also similar except I use pillar bracket and basin holders for those.



This post has been edited by JonSpark: Dec 21 2024, 01:30 PM