Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Labour cost for tiling, Cost for tiling

views
     
TSGSCboy
post Apr 12 2024, 06:01 PM, updated 2y ago

Regular
******
Senior Member
1,198 posts

Joined: Apr 2015
Whats the current rate for labour for tiling nowadays? was quoted around 32k for floor and wall , only labour for 4 toilets, whereas floor tiling cost me 78k, for 220m2
bobowyc
post Apr 12 2024, 06:26 PM

You are who you are.
******
Senior Member
1,921 posts

Joined: Apr 2013
From: Petaling Jaya


QUOTE(GSCboy @ Apr 12 2024, 06:01 PM)
Whats the current rate for labour for tiling nowadays? was quoted around 32k for floor and wall , only labour for 4 toilets, whereas floor tiling cost me 78k, for 220m2
*
Both also labour only? shocking.gif
holynoob
post Apr 13 2024, 06:03 AM

Getting Started
**
Junior Member
94 posts

Joined: Sep 2014
QUOTE(GSCboy @ Apr 12 2024, 06:01 PM)
Whats the current rate for labour for tiling nowadays? was quoted around 32k for floor and wall , only labour for 4 toilets, whereas floor tiling cost me 78k, for 220m2
*
My friend just renovated his house, about 45m2 of floor tiling labour including floor+wall for small bathroom around 20+k

This post has been edited by holynoob: Apr 13 2024, 06:04 AM
sonerin
post Apr 13 2024, 09:28 AM

Look at all my stars!!
*******
Senior Member
8,738 posts

Joined: Aug 2009
Labour cost depend on type of tiles. It also depend if is tiling on floor or wall. Is possible to be very expensive
laucse
post Apr 14 2024, 08:32 PM

New Member
*
Newbie
4 posts

Joined: Jan 2019
QUOTE(GSCboy @ Apr 12 2024, 06:01 PM)
Whats the current rate for labour for tiling nowadays? was quoted around 32k for floor and wall , only labour for 4 toilets, whereas floor tiling cost me 78k, for 220m2
*
What size tiles? Super high price for the floor tiling, toilet might be ok but also depends on toilet size, tiles size and tile selection which would determine difficulty in installation
ongss
post Apr 18 2024, 12:13 PM

Casual
***
Junior Member
426 posts

Joined: Jun 2008


I did my tiling last year. The labour cost was by size. 60cm x 60cm is RM13.50 psf with sand screeding for floor, RM8.50psf without plastering for wall. For cutting 45 degree for the edge, it was RM8 per foot run. Remember to ask what brand and type of cement gum and grout lines for tiling. Weber? Sika? MAPEI? Even for the same brand, there are different grades.

This post has been edited by ongss: Apr 18 2024, 12:14 PM
bobowyc
post Sep 24 2024, 12:08 PM

You are who you are.
******
Senior Member
1,921 posts

Joined: Apr 2013
From: Petaling Jaya


QUOTE(ongss @ Apr 18 2024, 12:13 PM)
I did my tiling last year. The labour cost was by size. 60cm x 60cm is RM13.50 psf with sand screeding for floor, RM8.50psf without plastering for wall. For cutting 45 degree for the edge, it was RM8 per foot run. Remember to ask what brand and type of cement gum and grout lines for tiling. Weber? Sika? MAPEI?  Even for the same brand, there are different grades.
*
Hi, may i ask which tiler you appointed? Can share his details with me? Thank you.
Eternallyus
post Dec 10 2024, 07:29 PM

New Member
*
Junior Member
31 posts

Joined: Mar 2022
QUOTE(ongss @ Apr 18 2024, 12:13 PM)
I did my tiling last year. The labour cost was by size. 60cm x 60cm is RM13.50 psf with sand screeding for floor, RM8.50psf without plastering for wall. For cutting 45 degree for the edge, it was RM8 per foot run. Remember to ask what brand and type of cement gum and grout lines for tiling. Weber? Sika? MAPEI?  Even for the same brand, there are different grades.
*
Do you mean the tiling cost for a 60x6p is rm13.50 or it is rm13.50 psf which makes it rm34?
ongss
post Dec 11 2024, 01:40 AM

Casual
***
Junior Member
426 posts

Joined: Jun 2008


QUOTE(Eternallyus @ Dec 10 2024, 07:29 PM)
Do you mean the tiling cost for a 60x6p is rm13.50 or it is rm13.50 psf which makes it rm34?
*
The labour cost is RM13.50 psf but this rate is for the size of 60x60. Larger size e.g. 120 x 60 cm, the supplier charged higher rate. Usually, larger size is thicker and heavier.
submergedx
post Dec 11 2024, 07:44 AM

Regular
******
Senior Member
1,124 posts

Joined: Jun 2015
I was in hurry renovation my house last year even though my contractor charged me high price and i have no choice of it.

Replaced the old tiles with new one, disposal, grouting all in one 1000sqft for RM28k just for labour, and I provide my own Feruni tiles.

Then I make a simple survey at Facebook renovation group, actually it can saved up to 50% of the price.
ehwee
post Dec 14 2024, 11:44 PM

Value Our Living Spaces!
*****
Junior Member
790 posts

Joined: Sep 2013
From: Selangor


QUOTE(ongss @ Apr 18 2024, 12:13 PM)
I did my tiling last year. The labour cost was by size. 60cm x 60cm is RM13.50 psf with sand screeding for floor, RM8.50psf without plastering for wall. For cutting 45 degree for the edge, it was RM8 per foot run. Remember to ask what brand and type of cement gum and grout lines for tiling. Weber? Sika? MAPEI?  Even for the same brand, there are different grades.
*
8.50 psf for wall tile is reasonable, the 13.50 psf for floor seems on high side, is it includes slanting cement screening layer and waterproofing?
ehwee
post Dec 14 2024, 11:47 PM

Value Our Living Spaces!
*****
Junior Member
790 posts

Joined: Sep 2013
From: Selangor


QUOTE(submergedx @ Dec 11 2024, 07:44 AM)
I was in hurry renovation my house last year even though my contractor charged me high price and i have no choice of it.

Replaced the old tiles with new one, disposal, grouting all in one 1000sqft for RM28k just for labour, and I provide my own Feruni tiles.

Then I make a simple survey at Facebook renovation group, actually it can saved up to 50% of the price.
*
Ridiculous price
submergedx
post Dec 15 2024, 10:44 AM

Regular
******
Senior Member
1,124 posts

Joined: Jun 2015
QUOTE(ehwee @ Dec 14 2024, 11:47 PM)
Ridiculous price
*
And that is cheaper quotes among. I got 3 different quotes, the most expensive was RM40k.
RM28k was the cheapest.
Gila siot quotation in kl.
handyboy
post Dec 17 2024, 03:21 PM

Getting Started
**
Junior Member
119 posts

Joined: Feb 2021

that's one of the purposes of quotation
ongss
post Dec 20 2024, 12:26 PM

Casual
***
Junior Member
426 posts

Joined: Jun 2008


QUOTE(ehwee @ Dec 14 2024, 11:44 PM)
8.50 psf for wall tile is reasonable, the 13.50 psf for floor seems on high side, is it includes slanting cement screening layer and waterproofing?
*
13.50 including the sand and cement floor screeding but excluding waterproofing. For tiling on the floor, this has to be done together by the tiling contractor because they need to make sure water flow directions towards the floor traps.

I did get three quotations to compare. If the tiling is done purely by local Chinese, the cost was even higher. Mine was done by both local Chinese and Pakistani. The local Chinese marked the floor levels to ensure my sliding doors were levels. For my ensuite bathrooms, there are three levels, shower areas, the dry bathroom (WC, basin, and etc), and then bedroom timber floors.

To be honest to you, I am very satisfied with the installer because all jointing parts for the tiling, e.g. door frame, sliding doors, and etc are good.

 

Change to:
| Lo-Fi Version
0.0255sec    0.69    5 queries    GZIP Disabled
Time is now: 28th November 2025 - 08:11 AM