Hello and good day guys..want to ask..

what device is good for load balance...suggest me router...


it is possible to load balance with 2 5g isp


maxis+yes as an example....


i know that dnb is sharing....so it is possible or not?

thanks

Why do you want to load balancing?

Maxis how many mbps

yes how many mbps.

Mikrotik router capable of it.

maxis around 300 mbps five 5

yes around 250 mbps five g....

suggest the mikrotek router


somebody said if load balance 5g+5g is imposible since come with same dnb tower....but i believe would be diffrent isp even same tower...

you think doing this will be faster???

oh my..

what is your purpose to load balancing?

Load balancing is where the load is share.

1 line will use Maxis another line will use yes. You cannot combine them together.

meaning to say shud usng ratio rite..?

what is your purposes? You cannot combine the speed rather you can share the load.

A bit technical

increase the speed

There is no such thing in load balancing to increase the speed.
You can only share the load thus increase the speed.

Bonding is possible if you have the resources. You'll need a server hosted somewhere in MY. Whatever bonding without a server wouldn't give you what you want.

I've done a OpenMPTCP bonding implementation recently with dual 5G connection to a VPS with 10G port at around 80% efficiency. Total monthly cost is more expensive than Unifi 2Gbps plan.

If you want a cheaper solution, use Speedify but I don't think they have servers here

You can't exactly combine 300 + 200 and get 500

You can balance the load as in

PC 1 use Maxis
PC 2 use Yes
PC 3 use Maxis

But you cannot say PC1 download @500Mbps speeds using BOTH Maxis and Yes

Not possible due to how the internet works

The investment for this kind of load balancing setup is expensive compared to just getting Fiber

Or if Fiber is unavailable, consider getting a better 5G router maybe?
Better modem, better antennas for a better speed
On paper should be able to pull up to 1Gig if the stars align

yes i did some reseach regarding this...it call bonding...yea..need to use speedify ..at least need some tools like pi4 in order to run the speedify....



thanks for the words sir...i just do some testing and i am newbie regarding this issue..
but some people said i cant do this since dnb tower is sharing each other....

DNB tower is the same but 4g tower is different. Our 5G still need 4G. 5G is NSA aka fake 5G.

This post has been edited by OlgaC4: Dec 19 2023, 03:27 PM

you want load balancing, multi-ISP "aggregation", or standby-ISP failover?

I think both 4g (band 28) and 5g (band 78) come from same tower. It's not using any existing 4g from telco to connect. It's using DNB 4g signal.

DNB don't have 4G.

This. Asking the right questions.

I did this a while back using Mikrotik. See here: https://forum.lowyat.net/index.php?showtopi...post&p=83909578

Yes, can increase speed in things where there're are at least 2 connections.