Hey guys i have this casing which has red color on the side and i wish to change the red color to black color but i have not much confidence doing it so i was hoping to get some good advise here

Below is my casing the red stripes i wish to make it black colour

Strip the front panel to pieces and take the part that u want to change the color out ..

Then visit Mnpctech for some mod tutorial ..

look out for spray paint your case tutorial .. and u would get to know how it works to get the paint job done . .

if u can't separate the red strip that u want to paint from the front panel or ur case .. then u have to work with masking tape ..

it's a bit hassle for first timer .. but it won't be too difficult ..

i think knot stripe out may i know where to find maskign tape?Which 1 is better spray or paint?

u could get masking tape in stationary shop or hardware store where u could get a spray can as well ..

Spray would be the best, but do remember u need self etching primer, spray can and a paint protective spray as well ...

need to be patient and work on the technique ... did u watch the tutorial that given above ?? ?

i saw the mods but i haven watch will update when i finish spraying most probally this week if

btw

1)The round area how to use basking tape to prevent it from the black spray?

apply few layer and cut out the shape with a pen knife .. be cautious while doing it .. u don't want to cut the surface of the panel instead ..

oh ok then the spray those normal spray sold in hardware and supermarket also can?

that hard to read other's worklog?