Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
456 Pages « < 445 446 447 448 449 > » Bottom

Outline · [ Standard ] · Linear+

Unifi Official TM UniFi High Speed Broadband Thread V41, READ 1ST PAGE FOR RELEVANT WIFI INFO

views
     
SUSnonamer
post Nov 27 2023, 08:45 AM

Getting Started
**
Junior Member
224 posts

Joined: Apr 2019
QUOTE(kwss @ Nov 27 2023, 04:08 AM)
You are misdiagnosing the issue. It has nothing to do with DNS or IPv6.

lowyat.net:
CODE

$ dig +short lowyat.net a lowyat.net aaaa @1.1.1.1
104.26.7.73
172.67.74.89
104.26.6.73
2606:4700:20::ac43:4a59
2606:4700:20::681a:749
2606:4700:20::681a:649

$ dig +short lowyat.net a lowyat.net aaaa @8.8.8.8
172.67.74.89
104.26.7.73
104.26.6.73
2606:4700:20::681a:649
2606:4700:20::681a:749
2606:4700:20::ac43:4a59


lazada.com.my:
CODE

$ dig +short lazada.com.my a lazada.com.my aaaa @1.1.1.1
47.246.167.7
47.246.165.39
47.246.165.72
47.246.165.182
47.246.165.115
47.246.167.210
47.246.167.252
47.246.167.254

$ dig +short lazada.com.my a lazada.com.my aaaa @8.8.8.8
47.246.167.7
47.246.165.39
47.246.165.72
47.246.165.182
47.246.165.115
47.246.167.210
47.246.167.252
47.246.167.254


As you can clearly see, both Cloudflare DNS and Google DNS return the same result. So changing what DNS server you use doesn't affect the result one bit.

For lowyat.net, all IPv4 go to HK directly. all IPv6 go to SG directly.
lowyat.net uses Cloudflare DNS as their authoritative DNS and also CDN.
Simply using IPv6 cut latency in half!
Trying a few other Cloudflare fronted domain, not all of them have this problem, which I suspect is how Cloudflare distribute traffic between HK and SG datacenter.

For lazada.com.my, all IPv4 go to HK > SG. No IPv6 support.
lazada.com.my uses Alibaba Cloud as their authoritative DNS.

To further diagnose this issue, TM need to provide public access to their BGP Looking Glass. Alternatively anyone who has peering with TM BGP + full internet routing table should be able to diagnose it properly.

pbebank.com:
CODE

$ dig +short pbebank.com a pbebank.com aaaa @1.1.1.1
203.115.208.218

$ dig +short pbebank.com a pbebank.com aaaa @8.8.8.8
43.241.40.218

$ dig +short www.pbebank.com a www.pbebank.com aaaa @1.1.1.1
203.115.208.218

$ dig +short www.pbebank.com a www.pbebank.com aaaa @8.8.8.8
203.115.208.218

$ dig +short www2.pbebank.com a www2.pbebank.com aaaa @1.1.1.1
43.241.40.253

$ dig +short www2.pbebank.com a www2.pbebank.com aaaa @8.8.8.8
43.241.40.253


Here we can see the apex domain return a different IP address: 203.115.208.218 (Cloudflare), 43.241.40.218 (Google)

43.241.40.218 and 43.241.40.253 (AS6453 TATA COMMUNICATIONS (AMERICA) INC) go to Singapore and come back to Kuala Lumpur.
203.115.208.218 (AS10204 Arcnet NTT MSC ISP) route directly via MyIX.

Let's flush the DNS resolver cache:
Google: https://dns.google/cache
Cloudflare: https://1.1.1.1/purge-cache/

CODE

$ dig +short pbebank.com a pbebank.com aaaa @8.8.8.8
43.241.40.218

$ dig +short pbebank.com a pbebank.com aaaa @1.1.1.1
58.26.83.218


You can see Cloudflare DNS now gets a new IP address while Google DNS gets the same IP address.
58.26.83.218 (AS4788 TM TECHNOLOGY SERVICES SDN. BHD.) is super fast since it is inside TM network and I am using TM.

Let's flush the cache for a second time:
CODE

$ dig +short pbebank.com a pbebank.com aaaa @8.8.8.8
43.241.40.218

$ dig +short pbebank.com a pbebank.com aaaa @1.1.1.1
203.115.208.218


Notice we are back to square one? This must be pbebank.com authoritative DNS problem.
CODE

$ dig +short ns pbebank.com
ns1.a1.impervasecuredns.net.
ns1.a0.impervasecuredns.net.
ns1.a2.impervasecuredns.net.


It might be Imperva problem, or more likely Public Bank configure Geo IP resolver incorrectly.
EDIT:
CODE

$ wget -O - -4 https://cloudflare.com/cdn-cgi/trace
--2023-11-27 04:42:50--  https://cloudflare.com/cdn-cgi/trace
Resolving cloudflare.com (cloudflare.com)... 104.16.132.229, 104.16.133.229
Connecting to cloudflare.com (cloudflare.com)|104.16.132.229|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: ‘STDOUT’

-                            [<=>                                ]       0  --.-KB/s               fl=632f34
h=cloudflare.com
ip=115.134.178.XXX
ts=1701031371.005
visit_scheme=https
uag=Wget/1.21.3
colo=SIN
sliver=010-tier1
http=http/1.1
loc=MY
tls=TLSv1.3
sni=plaintext
warp=off
gateway=off
rbi=off
kex=X25519

$ wget -O - -6 https://cloudflare.com/cdn-cgi/trace
--2023-11-27 04:42:57--  https://cloudflare.com/cdn-cgi/trace
Resolving cloudflare.com (cloudflare.com)... 2606:4700::6810:84e5, 2606:4700::6810:85e5
Connecting to cloudflare.com (cloudflare.com)|2606:4700::6810:84e5|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: ‘STDOUT’

-                            [<=>                                ]       0  --.-KB/s               fl=497f454
h=cloudflare.com
ip=2001:e68:5427:A:B:C:D:E
ts=1701031377.522
visit_scheme=https
uag=Wget/1.21.3
colo=SIN
sliver=010-tier1
http=http/1.1
loc=MY
tls=TLSv1.3
sni=plaintext
warp=off
gateway=off
rbi=off
kex=X25519


Looks like Cloudflare is working properly over both IPv4 and IPv6. colo=SIN, loc=MY
A quick look into their community forum shows that this is an intended behavior for customer using Free and Pro plan. Fork out the money for Business or Enterprise plan and the problem will disappear.
Maybe lowyat.net should just pay more.
*
it might be load balancing mechanism using dns...if the application can handle it then what is the problem?
Omochao
post Nov 27 2023, 09:44 AM

Enthusiast
*****
Junior Member
835 posts

Joined: Nov 2007
From: Land of Forgotten
Just found out that there is an app on google playstore for Fiberhome SR1041F model..should be compatible with other fiberhome models as well, I guess.

And I believe the future firmware upgrades will be through this app as well, as the option page has an upgrade function.

A lot of basic functions can be found at toolbox page, parental control, wifi mode, and guest mode etc.

https://play.google.com/store/apps/details?...erhome.terminal

Also, can be bind to your email, to remotely manage your router + mesh from anywhere anytime. The setup to all of this is very straightforward, just need to connect your wifi on fiberhome and follow on screen instructions.

» Click to show Spoiler - click again to hide... «

kwss
post Nov 27 2023, 09:49 AM

Regular
******
Senior Member
1,207 posts

Joined: Aug 2018
QUOTE(OlgaC4 @ Nov 27 2023, 08:43 AM)
www.lowyat.net website take 2 second for  unfi to load when start.
Maxis load super fast. Please tell me why?
*
That's some very general statement, and I am sure you will see general reply:
1. TM routing problem
2. Your router problem

You must perform diagnostic during the problem to find out why.
Based on your wording, I am assuming when your WiFi has problem loading, you use your data which is Maxis and it load fast?
The thing is you have instantly changed a lot of variables. You are no longer using your WiFi, your router, TM fiber network, TM BNG, TM core network, TM peering and everything upstream.

Like are you even sure if you are connecting to the exact same IP address from the exact same data center on the exact same server?
Cloudflare uses Anycast BGP. One IP address can mean different datacenter, different load balancer, different physical server.

I am also not clear if lowyat.net will take you 2 seconds to load, every, single, time?
While Maxis load instantly, every, single, time?

Also if you are using a phone, network diagnostic is impossible.

QUOTE(nonamer @ Nov 27 2023, 08:45 AM)
it might be load balancing mechanism using dns...if the application can handle it then what is the problem?
*
You mean pbebank? One prefix is so much faster than the other.
I am sure many people don't mind as long as it works.
OlgaC4
post Nov 27 2023, 10:09 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(kwss @ Nov 27 2023, 09:49 AM)
That's some very general statement, and I am sure you will see general reply:
1. TM routing problem
2. Your router problem

You must perform diagnostic during the problem to find out why.
Based on your wording, I am assuming when your WiFi has problem loading, you use your data which is Maxis and it load fast?
The thing is you have instantly changed a lot of variables. You are no longer using your WiFi, your router, TM fiber network, TM BNG, TM core network, TM peering and everything upstream.

Like are you even sure if you are connecting to the exact same IP address from the exact same data center on the exact same server?
Cloudflare uses Anycast BGP. One IP address can mean different datacenter, different load balancer, different physical server.

I am also not clear if lowyat.net will take you 2 seconds to load, every, single, time?
While Maxis load instantly, every, single, time?

Also if you are using a phone, network diagnostic is impossible.
You mean pbebank? One prefix is so much faster than the other.
I am sure many people don't mind as long as it works.
*
All are cat 6 cable connection.
lowyat take 2 seconds to load at the beginning only when using unfi.
It take maxis less then 1 sec to load.

High end router Mikrotik RB5009

lowyat website respond faster when using maxis compared to unfi.


note that my maxis is using LTE.

Main reasons i downgrade from unfi 500mbps to maxis 300mbps paying the same price

This post has been edited by OlgaC4: Nov 27 2023, 10:10 AM
OlgaC4
post Nov 27 2023, 10:17 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
Not only that but in FPS gaming. The quality of picture for maxis is like 100% clear. unfi is about 90-95% clear. You will notice it immediately.
Accuracy using maxis about 80-90% unfi about 50%

Still cannot figure it out why.

This post has been edited by OlgaC4: Nov 27 2023, 10:21 AM
Quanta
post Nov 27 2023, 10:18 AM

Idiot member
******
Senior Member
1,425 posts

Joined: Jan 2003
From: Pearl 14000 + Kayangan 01000


try post speedtest results from both Unifi and Maxis LTE
OlgaC4
post Nov 27 2023, 10:20 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(Quanta @ Nov 27 2023, 10:18 AM)
try post speedtest results from both Unifi and Maxis LTE
*
same thing Maxis LTE 25ping unfi 2ping

Maxis LTE 200mbps
Unfi 520mbps

This post has been edited by OlgaC4: Nov 27 2023, 10:23 AM
yenchenje
post Nov 27 2023, 10:27 AM

Enthusiast
*****
Junior Member
932 posts

Joined: Dec 2019
QUOTE(OlgaC4 @ Nov 27 2023, 10:17 AM)
Not only that but in FPS gaming. The quality of picture for maxis is like 100% clear. unfi is about 90-95% clear. You will notice it immediately.
Accuracy using maxis about 80-90% unfi about 50%

Still cannot figure it out why.
*
How is quality of picture a relevant thing in FPS gaming? Do you mean packet loss/ping/RTT time?

What are you playing? PowerPoint presentation?
kwss
post Nov 27 2023, 10:30 AM

Regular
******
Senior Member
1,207 posts

Joined: Aug 2018
QUOTE(OlgaC4 @ Nov 27 2023, 10:09 AM)
All are cat 6 cable connection.
lowyat take 2 seconds to load at the beginning only when using unfi.
It take maxis less then 1 sec to load. 

High end router Mikrotik RB5009

lowyat website respond faster when using maxis compared to unfi.
note that my maxis is using LTE.

Main reasons i downgrade from unfi 500mbps to maxis 300mbps paying the same price
*
After you open a new tab and before you type in lowyat.net, open Developer Tool, then load lowyat.net.
What do you see in Network > First load item > Timing?

user posted image
Quanta
post Nov 27 2023, 10:31 AM

Idiot member
******
Senior Member
1,425 posts

Joined: Jan 2003
From: Pearl 14000 + Kayangan 01000


Maybe due to this latency?

user posted image
OlgaC4
post Nov 27 2023, 10:51 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(yenchenje @ Nov 27 2023, 10:27 AM)
How is quality of picture a relevant thing in FPS gaming? Do you mean packet loss/ping/RTT time?

What are you playing? PowerPoint presentation?
*
The picture quality of the FPS games.

BF2042 singapore sever
OlgaC4
post Nov 27 2023, 10:51 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(Quanta @ Nov 27 2023, 10:31 AM)
Maybe due to this latency?

user posted image
*
My maxis LTE is 25ping my unfi cable is 2ping
OlgaC4
post Nov 27 2023, 10:56 AM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(kwss @ Nov 27 2023, 10:30 AM)
After you open a new tab and before you type in lowyat.net, open Developer Tool, then load lowyat.net.
What do you see in Network > First load item > Timing?

user posted image
*
164ms
SUSnonamer
post Nov 27 2023, 10:56 AM

Getting Started
**
Junior Member
224 posts

Joined: Apr 2019
QUOTE(kwss @ Nov 27 2023, 09:49 AM)
You mean pbebank? One prefix is so much faster than the other.
I am sure many people don't mind as long as it works.
*
what means by prefix? if they have 2 datacenter the slower server will be the one remotely accessing the shared database

kwss
post Nov 27 2023, 11:17 AM

Regular
******
Senior Member
1,207 posts

Joined: Aug 2018
QUOTE(OlgaC4 @ Nov 27 2023, 10:56 AM)
164ms
*
Can I have the screenshot of the whole thing? There are a few numbers inside.
Please only submit screenshot for the "slow loading".


QUOTE(nonamer @ Nov 27 2023, 10:56 AM)
what means by prefix? if they have 2 datacenter the slower server will be the one remotely accessing the shared database
*
This: https://bgp.he.net/net/43.241.40.0/24
I am talking about the network path going from Kuala Lumpur to Singapore and back to Kuala Lumpur. The other prefix route via MyIX or directly to TM. It has nothing to do with app, database, etc. It is all OSI Layer 3.
sitescope
post Nov 27 2023, 01:00 PM

Look at all my stars!!
*******
Senior Member
4,493 posts

Joined: Oct 2013
QUOTE(Omochao @ Nov 27 2023, 09:44 AM)
Just found out that there is an app on google playstore for Fiberhome SR1041F model..should be compatible with other fiberhome models as well,  I guess.

And I believe the future firmware upgrades will be through this app as well, as the option page has an upgrade function.

A lot of basic functions can be found at toolbox page, parental control, wifi mode, and guest mode etc.

https://play.google.com/store/apps/details?...erhome.terminal

Also, can be bind to your email, to remotely manage your router + mesh from anywhere anytime. The setup to all of this is very straightforward, just need to connect your wifi on fiberhome and follow on screen instructions.

» Click to show Spoiler - click again to hide... «

*
Can u open parental ctrl
What option it has there ?
yenchenje
post Nov 27 2023, 01:13 PM

Enthusiast
*****
Junior Member
932 posts

Joined: Dec 2019
QUOTE(OlgaC4 @ Nov 27 2023, 10:51 AM)
The picture quality of the FPS games.

BF2042 singapore sever
*
Are you streaming your game via Cloud? Cuz wtf is picture quality in a FPS game that is running locally but connects to a remote server?
OlgaC4
post Nov 27 2023, 01:38 PM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(yenchenje @ Nov 27 2023, 01:13 PM)
Are you streaming your game via Cloud? Cuz wtf is picture quality in a FPS game that is running locally but connects to a remote server?
*
Just normal FPS gaming not streaming via clould and yes the picture quality does effect when using maxis and unfi.

When using maxis super detail and clean

using unfi not so detail and picture not so clean

This happen even at the lobby when there is no movement.
yenchenje
post Nov 27 2023, 02:46 PM

Enthusiast
*****
Junior Member
932 posts

Joined: Dec 2019
QUOTE(OlgaC4 @ Nov 27 2023, 01:38 PM)
Just normal FPS gaming not streaming via clould and yes the picture quality does effect when using maxis and unfi.

When using maxis super detail and clean

using unfi not so detail and picture not so clean

This happen even at the lobby when there is no movement.
*
What? That’s not how that works

So let’s say if I’m playing Apex, if I play in SG servers I’ll get better image quality comparing when I’m playing on like NA servers?

Unless you’re complaining about ping/RTT, there should be virtually no difference playing it on a connection with worst routing when compared.

You don’t stream game assets from a remote server, all your game assets is local, the only thing that your internet will affect you is remote servers

Please do enlighten me with screenshots cause unless you are, as I alluded to before playing via Cloud Streaming, there will be no difference with image quality laugh.gif
OlgaC4
post Nov 27 2023, 03:09 PM

Look at all my stars!!
*******
Senior Member
5,292 posts

Joined: Nov 2006
QUOTE(yenchenje @ Nov 27 2023, 02:46 PM)
What? That’s not how that works

So let’s say if I’m playing Apex, if I play in SG servers I’ll get better image quality comparing when I’m playing on like NA servers?

Unless you’re complaining about ping/RTT, there should be virtually no difference playing it on a connection with worst routing when compared.

You don’t stream game assets from a remote server, all your game assets is local, the only thing that your internet will affect you is remote servers

Please do enlighten me with screenshots cause unless you are, as I alluded to before playing via Cloud Streaming, there will be no difference with image quality laugh.gif
*
I am telling you there is a different. I already told you also i game better with LTE then fiber line. To believe or not is up to you.

456 Pages « < 445 446 447 448 449 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0203sec    0.70    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 03:25 PM