+1. I would like to know about this too

locked

Yes wireless Fibre
https://forum.lowyat.net/topic/5318650/all

Anyone using yes5g flexi with nokia fastmile 5g?

Hows the performance?

Can put Yes FT5G Prepaid Plan simcard into 5g ROUTER and use as unlimited data?

nope, there is a reason they have a more expensive plan that is intended for router use

I was using YES broadband Flexi 58, quite ok, but when moving around, the line can't connected quickily ( i used it in 5g Phone)

then i changed to XOX postpaid unlimited, worst. At home also will switch to EDGE, very frequently, and always can't switch back to 5G automatically.

Now thinking to sign the umobile free modem 2 years contract.

All 5G is from DNB, so you will experience the same signal source as Flexi 58.

Maybe there will be some difference in how well the different modems pull the signal.

This post has been edited by Ngto: May 28 2024, 07:28 AM

I was using YES 5G 58, and I switched to UM Home 68 after a month. Honestly, UM is faster, has lower latency, higher upload speed, and is way more stable than YES. I am using the same router at the exact location, etc.

How you terminate the YES service ? Can terminate immediately or need to give 1 month of notice ?
Thanks

I went to the YES Experience Store at Lot10. I terminated it after a month since I had already pre-paid for a month when I got the SIM card.

Nokia Fastmile will connecto to both band 78 & 28.

But it seems to have higher tendency to pull data from 28.

I believe this is Yes' network setting.

Thanks

Might consider this for secondary plan/router

So far I'm only able to get max 240Mbps thru this Nokia Fastmile (late night specifically).

Daytime, around 130-150Mbps.

100 Mbps sound kinda nice for me 👍👍👍

So u use the flexi plan sim card in a 5g phone and turn on hotspot? It works well?

Yes 5G Flexi RM 58 can be used in a 5G phone hotspot.

Thanks for the info

TPlink X50-5G yesterday updated firmware that can lock cell. It is lock cell, not lock band, you have to manually key in the details. The information can find in the app. NRARFCN and PCI in 5G NR. The router will stick to that specific tower only. I believe when change the location or telco the setting won't work any more.

I will see if the router still stupidly switch to 4G or not. 4G only 1 bar 10mbps, 5G is 3 bars 200mbps, and yet it can suddenly switch to 4G and stay. Hopefully this lock cell thing can solve it.

This post has been edited by iiee: Jun 25 2024, 09:58 AM

Nope not working, still stupidly switch to 1 bar 4G slow speed for no reason. Don't buy X50-5G cannot lock band.

I think may be is the telco setting problem. I face this before, suddenly connection keep drop from 5G to 4G, and through RSRP,RSRQ,SINR value, show 5G signal strength suddenly become weaker and can’t maintain connection on 5G even after lock band.

Complain to YES and MCMC, and after weeks everything back to normal again after YES saying they had done some setting on tower site.