AMDŽ Socket-AM2/AM2+ Overclocking thread (V3), Phenom... Here AMD goes
|
|
 Oct 29 2007, 05:02 PM
Return to original view | Post
#1
|
 
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron    
|
my setup now stable enough..what do i need to change?
Mobo Tforce 550 Brisbane 3600+ @ 2.7GHz vcore 1.3v in bios ram Micron D9 ram speed i set to Auto and the ram oced to 540MHz timing set to AUTO. only command per... i set to 2T vdimm = 2.10v ** i suspect the problem comes from the ram |
|
|
|
|
|
Oct 29 2007, 06:58 PM
Return to original view | Post
#2
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
QUOTE(xixo_12 @ Oct 29 2007, 06:38 PM) ur ram bro.. try to loose ur timing, n play with safe voltage.. use divider as wel.. then to OR back..  1. timing i set to auto..so any recommend timing to try? 2. what do u mean by safe voltage?2.1v not safe edi? -pWs- i'll try to run memtest later. |
|
|
Oct 29 2007, 07:09 PM
Return to original view | Post
#3
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
it's micron d9gkx and no passive or active cooler.
Sorry missread..i thought memtest  i have memset with me now.so what i supposed to try? |
|
|
Oct 29 2007, 10:21 PM
Return to original view | Post
#4
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
QUOTE(xixo_12 @ Oct 29 2007, 08:50 PM) @sjn i try to increase the trfc to 195ns..others same as before.tell here how the thing going.. glad to help ppl  300HTT and all the ram setting set to auto except 2T.vdimm stick to 2.1v test with rightmark RAMtest |
|
|
Nov 18 2007, 08:19 PM
Return to original view | Post
#5
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
anyone know what's the highest vdimm for T550?in BIOS the highest i can go only 2.1v
|
|
|
Dec 2 2007, 12:48 AM
Return to original view | Post
#6
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
another F3 user ..after this there should be around 2x F3 user will flood here
  vcore in bios = 1.25v vdimm = 2.1v set to auto This post has been edited by sjn hassan: Dec 2 2007, 12:49 AM |
|
|
Dec 2 2007, 10:49 AM
Return to original view | Post
#7
|
|
Senior Member
3,544 posts Joined: Jan 2003 From: United States of Cybertron
|
QUOTE(alive88 @ Dec 2 2007, 12:53 AM) bro...what ram do u use?make it tighter bro...seems too loose team elite 667 only..don't think it can go lower timing with such of vdimm (2.1v)looks like its a good ram QUOTE(xixo_12 @ Dec 2 2007, 09:52 AM) 1.25? check it back, try to push more from that speed, sure it can push .. what's wrong about 1.25v?to high or to low? |
|
Topic ClosedOptions
|
| Change to: |  0.0306sec
 0.61
 7 queries
 GZIP Disabled
Time is now: 4th December 2025 - 12:02 AM |
Quote