hey guys check out mine 1st time Oc

stable i run with orthos but the super pi u all use wat setting as in which number.

Stock Cooler



Btw can go furtherorbtw i am still new and there are many things that i dont understand such as the voltage and the ram thing

This post has been edited by choyster: Nov 12 2007, 03:18 AM

hi guys using the biostar t690 mobo.

1)Why after i set the setting for Oc it says i am running safe setup thing wats that?

2)Why got so many settings for memory timing which 1 should i set?
3)Which 1 is the Ht setting?i see got 1 is ask u to choose a number but got 1 is got the number and the mhz de so which 1 should i set?

1)Changing the voltage dangerous or not?
2)Got Ram divider but 2 many things can be set i also dunno set which 1 normally is 5-5-5-15 but that 1 can set so many
3)ok i got it this 1

any1 using hacked bios for biostar t690?

i wonder how you guys oc your 4000+ to over 2.9ghz

my biostar mobo too many settings to be set for Ram timing any advise on good ram timing?i am using kingston value rams

guys 2.1ghz to 2.6ghz noticeable?

4000+ | Choyster | Biostar t690 | kingston Value | Stock



Do you think can go higher?what i need to do?

4000+ | Choyster | Biostar t690 | kingston Value | Stock



Managed to go little higher but when i go 266 giving Bsod and hang at startup screen

but using stock add 2 much vcore safe or not? as now my voltage 1.376 d

Nice Oc
Btw adding Vcore=Adding Cpu Voltage right? Now i add Cpu Voltage but its stuck at 1.4v it wont go higher why ar?

biostar t690G can up the voltage but cpuz dont show btw if hit limit then auto restart?if haven hit limit still can go windows right?

This post has been edited by choyster: Dec 10 2007, 09:38 AM

so many voltage to set do ram voltage need to be set?

will adding 2 much vcore kill ur proc in a instant when you start your cpu now i addd vcore but the voltage doesnt seem to go up anyone know whats the problem i'm using biostar t690g btw. If i set my ram at ddr400 but it runs at 400mhz=ddr800 right?

This post has been edited by choyster: Dec 10 2007, 08:21 PM

Guys now i am on vcore 1.43 and 2.7ghz my temps load 40 and idle 30 izzit normal? i'm using stock my fren said my temps are unusual

yea i'm using core temp

i heard people said that brisby got temp problem right?

Stock lo so how to measure the temp if like that