AMDŽ Socket-AM2/AM2+ Overclocking thread (V3), Phenom... Here AMD goes
|
|
 Dec 9 2007, 04:17 AM
Return to original view | Post
#61
|
 
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia  
|
my CAS# latency (CL) stuck at 3..cannot make more loose =.=
now stuck at 3-6-6-18 ...edit passed 3.55g but failed 3.60g.. stupid ram   this screenie is 3.5g pass 32m superpi..but no pi pic sorry and look at core0 temp when i never oc...FTW  This post has been edited by dj.eRicZzz: Dec 9 2007, 04:39 AM Attached thumbnail(s) 
|
|
|
|
|
|
Dec 9 2007, 12:32 PM
Return to original view | Post
#62
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(dblooi @ Dec 9 2007, 11:55 AM) why don't u change ur ram timings in bios? in bios i set to 5..but boot already also change to 3...then i even uninstall memset and reset whole bios and try to set again...i think maybe coz i make to ddr400 =(.... with memset, u can't change the cas latency imediately unless u use the 'save' function , but i don't recommend it if u save a wrong settings, u gonna be in big trouble  btw, always try to use the latest CPU-Z and if can , try to prove ur oc result with CPU-Z validation link, that's a good practise   anyways...oc till 5am++ den try super pi den i go sleep... then got this result Attached thumbnail(s) 
|
|
|
Dec 9 2007, 01:04 PM
Return to original view | Post
#63
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(dblooi @ Dec 9 2007, 12:39 PM) haha, i think i know ur problem adi adui...all time soo low...my ram value ram only..and also not nice d9...how to enter la...u pinjam ram kasi then i masuk la issit u save ur memset setting adi? save as CL3 if yes, just on ur memset again, save it into CL5 problem solved  edited: btw, good result you have there  is time to challege this http://forum.lowyat.net/topic/321443 currently no V2 fella post result in that thread yet  |
|
|
Dec 10 2007, 02:25 AM
Return to original view | Post
#64
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
Crucial Ballistix Tracer good ram or no?? reserve one piece already...whats the max voltage it can hold and speed?
i mean the value agak agak la =D |
|
|
Dec 10 2007, 07:33 PM
Return to original view | Post
#65
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(cyberloner @ Dec 10 2007, 08:37 AM) my brisbane go to 1.550 before and prime stable 24 hours at 3040mhz 1.6 also no problem..i tried before..but make sure ur proc is cool |
|
|
Dec 10 2007, 10:08 PM
Return to original view | Post
#66
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
recieved my sexy rams already....wahaha...old rams can throw away
can overclock and join 1m already Attached thumbnail(s) 
|
|
|
|
|
|
Dec 11 2007, 12:25 AM
Return to original view | Post
#67
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
ahhah...i'll get some ram coolers soon....
@dblooi...sorry la bro..havent oc...no ram cooler yet and ada orang...broke her promise...no more hsf now...using stock |
|
|
Dec 11 2007, 01:34 AM
Return to original view | Post
#68
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(tapirus @ Dec 11 2007, 12:40 AM) since when bro dblooi change gender to became sir dblooi??? the her is not dblooi last time cod with him still a men..maybe a few days after see ace mei mei he@she interested to change gender..  BTW this one my real topic... tonight i will oc kaw2..currently running on 3.4Ghz at 1.35 vcore 2.2 vdim..will post ss tomorrow morning...just want to push my ram before my new ram arrive tomorrow...  |
|
|
Dec 11 2007, 04:14 PM
Return to original view | Post
#69
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(dblooi @ Dec 11 2007, 06:33 AM) the her in his reply is refering his sister i guess shhhhhhhhhh dun tell everybody....later got ppl angry gentlemen, don't forget to post result in database ya http://forum.lowyat.net/topic/321443 make it bcome F3 playground anyways...tried my ram...got this result easily...no sweat Attached thumbnail(s) 
|
|
|
Dec 11 2007, 05:29 PM
Return to original view | Post
#70
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(AoiNatsume @ Dec 11 2007, 04:29 PM) nice result, im sure theres alot more headroom in that tracer of yours around 2.3v...i think can go lower la..i din try..just simply do first....yea...still can go further.... |
|
|
Dec 11 2007, 08:45 PM
Return to original view | Post
#71
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(alive88 @ Dec 11 2007, 07:18 PM) can u try at 2.1 and 2.2vdimm?lt me know the result k my mobo got voltdrop problem...not sure abt the vdimm...i see at the pc health in bios...is around 2.3 but i set at the oc menu is 2.4 or 2.5..not sure..forgotten |
|
|
Dec 12 2007, 04:57 AM
Return to original view | Post
#72
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(mizivincible @ Dec 12 2007, 02:59 AM) Received ST56F today hooray. Pushing and pushing, but still got the same speed at same vcore , 2.92ghz @ 1.44v. Will do another diagno later..... u're using what proc? i'm gonna do iced watercooling soon  This post has been edited by dj.eRicZzz: Dec 12 2007, 04:58 AM |
|
|
Dec 12 2007, 01:43 PM
Return to original view | Post
#73
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(ocz @ Dec 12 2007, 06:37 AM) Seems thats F3 makes OCer really2 mad. stock....with other fan...the stock fan 3krpm only...now i'm using 5krpm but same size and all... Bro,what cooler r u using now? is your F3 too hot to be handle by air cooling?  not say too hot but always average 40 at idle and load 46-50 |
|
|
|
|
|
Dec 12 2007, 01:54 PM
Return to original view | Post
#74
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(egoiste @ Dec 11 2007, 11:52 PM) can suggest me micro atx mobo with good oc ability...biostar 690 ok or not?... this board poison me already,,i want to get it also |
|
|
Dec 12 2007, 06:32 PM
Return to original view | Post
#75
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(ocz @ Dec 12 2007, 04:27 PM) Thats not a poison,its like OCer helping OCer. nolar..actually see this nice..then kena poison wan buy...see that cheap...kena poison again wan buy summore... Does lapping both chipset heasink have any effect in cooling? lapping depends la..but for my stock cooler after i lap the hsf till mirror shine and polish the processor...until semi mirror....really got alot temperature difference.... for chipset i dont know...i play to lap also but lazy abit also....for me chipset use fan enough already |
|
|
Dec 12 2007, 08:31 PM
Return to original view | Post
#76
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(tapirus @ Dec 12 2007, 07:21 PM) i want lap my heatsink this raya haji..hav time for doing that..hope can see lot of dif in temp..this will be my 1st lapping project..can u all give me some opinion.. use from low drid sand paper till 2000grid sand paper....make sure the surface is flat..and use water...rmb to clean the water when it's dirty...finish with 2000 grid already...i will use metal polish...then car wax....wax quite long also...den confirm mirror shine....then later ur proc u want very very very good contact also polish a bit...but proc...polish at your own risk...Added on December 12, 2007, 8:32 pm QUOTE(alive88 @ Dec 12 2007, 07:21 PM) @djericzzz i change change fan and use..sometimes put 120mm above...sometimes the stock...and sometimes same size with stock but higher rpm and cfmhey, u use stock hsf, which fan do u use?i want to find some ggod fan for my stock HSF This post has been edited by dj.eRicZzz: Dec 12 2007, 08:32 PM |
|
|
Dec 13 2007, 02:14 AM
Return to original view | Post
#77
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(tapirus @ Dec 12 2007, 09:58 PM) metal polish?? someone told metal polish = 3000 grid it's true??? duno..but i use that before car wax....proc my main prob..if i didn't lap also can?? if mainly proc problem..lap hsf and use metal polish at proc..polish at own risk This post has been edited by dj.eRicZzz: Dec 13 2007, 02:17 AM |
|
|
Dec 13 2007, 02:37 AM
Return to original view | Post
#78
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(lohwenli @ Dec 13 2007, 02:20 AM) Using wax is not a good idea as it can form a thin layer which may reduce performance. Even polish is not recommended unless you thoroughly wash the surface later. thats y i got polish my proc also..so both is smooth and will get a good contact...It depends, most important is that both processor IHS and the heatsink surface must be perfectly flat and matched to each other. Mirror finish is not so important, I will do a test on this to prove it when I'm free enough. and i do wash my hsf everytime after waxing |
|
|
Dec 13 2007, 03:11 AM
Return to original view | Post
#79
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(lohwenli @ Dec 13 2007, 02:59 AM) If you wax it, washing becomes completely useless..a waxed surface repels water and detergent.. hmm...car metallix wax wor...coz after washing i feel the surface not oily and only feels like smooth metal...dont know la... next time i try not to use car wax and see got difference or no |
|
|
Dec 13 2007, 04:11 AM
Return to original view | Post
#80
|
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
QUOTE(noobianz @ Dec 13 2007, 03:22 AM) i just checkout pc zone price list n they hav started selling phenom proc i got the price list from pc-fair....and got a few shops la... ...gonna grab 1 and pair it with MSI K9A2 Platinum board btw,im having prob with my current x2 4000+...ive oced it to 2.8ghz and stable after hours of orthos...but it seems that my onboard lan card is not working properly after i oced it to 2.8ghz@1.44v All-IT hypermarket and Viewnet got phenom in thier list |
|
Topic ClosedOptions
|
| Change to: |  0.0403sec
 0.74
 7 queries
 GZIP Disabled
Time is now: 4th December 2025 - 06:33 AM |
Quote