db bro edi hate brisbane..haha

graduated from G2 to F3, it maxed out @ 3.2Ghz. Even when both is on 3.2Ghz, G2 loses out about 4 secs on SPI-1M.

great price to grab for another "MAYBE" great OCable mobo

link: http://digitimes.com/Backgrounders/ArtRevi...ages=PR&seq=203

for the biostar tf7050-m2 mobo how to check the nb temp?i feel the nb very hot la...i change from the normal one to those normal black graphic card cooler and add 50mm fan on it...

and..dblooi bro..pm me ur numba pls

No wor. Want to leave it virgin for my dad
But i did go in the bios and see. Really equipped w wonderful overclocking options.

-pWs-

hehehe no yet........Have to wait for mood to come then can do superpi..
Fight with sifu dblooi hahahahha(I wish )

No worrr bro.........
No copywaza..Tried b4 but dunno why not working for me....
I will soon do it and play with timing.......attack SuperPI with vengeance hahaha
tight as a virgin and high speed as F1 car...heheh

now i add a fan to my nb already...the fan too big so i cut the 'frame' out then use abit tack to stick below there...works fine


this morning abt 4-5am  i add 0.175v to the core and bus speed 235, others stock(multiplier is 11) and i got 2.585ghz..stable and cool...

then i try with x10 the bios keeps on going to safe mode and cannot do anything

if all the settings i never disturb, i change only the bus speed to 225, boot but after turn on 2 prime95 and wana open cpuz, auto shutdown...

i really geram sometimes lol...press the button then cannot then i will press power button den cannot again sometimes i even press 2 together lol 

i wan dual..but wait first la..now no $ yet...

when multiplier is x10, i put bus speed to 230 only...also cannot boot...i tried to reset soooooooo many times =(
hmmm....wat i need to do to have my name in the first post??

just use alcohol..dont use water  ..maybe will cost u more than dry ice =.=

  salt ccan make the freezing temp go lower...

LN2 FTW bro
Ice cooling not enough for u already

-pWs-

i think abit is ok la..not too much...if you dont know why, try gargle your mouth with concentrated salt =D

can i know how u make the cpu temp go to -3? just ice with water meh?..or u blend it?

dblooi, use salty ICE water then but it won't give u a lot drop in temperature.

want lower temp? its time to spend more

try ice blended salt water if your ice now is big big piece....blend it will increase the surface area and will decrease the temp

walao...everything also so expansive ..have to wait la sigh

Adding salt will allow the ice to melt a few degrees below zero, which will allow for cooler melt-off to reach your processor (below 0 water is ice, which won't reach your processor). Adding other substances won't help much, you can only drop the melting point of ice be a few degrees at most by adding stuff to it.

Here's one way you can go lower on your current WC set with minimal effort (though like ice its only for a short time). Run alcohol (methylated spirit is an easy source) instead of water in your WC set. Then you can use dry ice to chill it (below zero if necessary, that's why you can't use water, it'll freeze). Control the temp by the amount of dry ice, or you may hve condensation problems. Also, if you're tempted to go overboard and run an extreme subzero run, be careful that sudden temp changes can cause the plastic parts of waterblocks to crack, especially when its already at very cold temps (plastic becomes more brittle the colder it gets).
I'm not a chemistry guy, I'm a physics guy, but I hope what I said above helps.
Only peltiers, phase change, dry ice and LN2 can get you below zero C. I have a possible subzero experiment planned for during my year end hols, I'll update when I get around to doing it.

tu la pasal.. try to troubleshot.. now in malacca back.. gudbye my lovely rig..
eeee.. geram aku..waa..