Brisby DTS is spoilt claimed by AMD.
What the cpu cooler you use currently??
-pWs-
AMDŽ Socket-AM2/AM2+ Overclocking thread (V3), Phenom... Here AMD goes
|
|
 Dec 11 2007, 02:55 AM
Return to original view | Post
#221
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6  
|
Ops...you using Brisby
Brisby DTS is spoilt claimed by AMD. What the cpu cooler you use currently?? -pWs- |
Quote|
|
|
|
|
Dec 11 2007, 04:07 AM
Return to original view | Post
#222
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(choyster @ Dec 11 2007, 04:02 AM) Stock lo so how to measure the temp if like that I used Brisby before.  I just estimated the temp using CPU temp which reported by my motherboard monitoring software. There is no way to get the accurate temp I think. -pWs- |
|
|
Dec 11 2007, 04:45 AM
Return to original view | Post
#223
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Ermmm
 Not sure. Add 15 degree also just estimation Better get a decent cooler. IIANM, last time my brisby 36 @ 3.0GHz running @ 30++ degree (near 40 degree) w Noctua NH12-UF. -pWs- |
|
|
Dec 11 2007, 04:55 AM
Return to original view | Post
#224
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Forgot already the Vcore.
Try search Xigmatek @ Garage. A nice cooler indeed. -pWs- |
|
|
Dec 12 2007, 12:12 AM
Return to original view | Post
#225
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Not ok. The board is very very good in overclockability.
-pWs- |
|
|
Dec 12 2007, 12:35 AM
Return to original view | Post
#226
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Go for it. I think TA690G is better than the board you using now.
I might be wrong too.  -pWs- |
|
|
|
|
|
Dec 12 2007, 05:19 PM
Return to original view | Post
#227
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
@ocz
I saw your signature that you use Acbel E2. Mind to tell me the rail voltage?? -pWs- |
|
|
Dec 12 2007, 10:15 PM
Return to original view | Post
#228
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(ocz @ Dec 12 2007, 05:38 PM) Heres the detail about the psu bro. I meant the value in the Windows using monitoring software. » Click to show Spoiler - click again to hide... « Its the AM2+ socket for phenom rite? Hows the oc performance? Mind to tell what the idle voltages and full load voltages?? -pWs- |
|
|
Dec 13 2007, 06:39 AM
Return to original view | Post
#229
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
1. Try to use other CPU Multi. Some board having problem w the x.5 multi
2. Does your ram plug to the slot nearest to the CPU? If not, you will need more Vcore to gain the particular speed. 3. Loose your MAL and Tref. 4. You might as well try other ram dividers. -pWs- This post has been edited by -pWs-: Dec 13 2007, 06:39 AM |
|
|
Dec 13 2007, 11:32 AM
Return to original view | Post
#230
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
For those 10th Anni ram owner, mind to tell me how high you guys can go w Vdimm 2.2v for both tCL 4 and 5??
Thanks -pWs- |
|
|
Dec 13 2007, 12:12 PM
Return to original view | Post
#231
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
What ram you using??
After overclock, what the ram speed and timing?? -pWs- |
|
|
Dec 13 2007, 12:22 PM
Return to original view | Post
#232
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I think 2.0 Vdimm should be enough.
If not, then only try 2.1V. 2.25v a bit too high already Got active cooling for ram?? -pWs- |
|
|
Dec 13 2007, 10:43 PM
Return to original view | Post
#233
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(ocz @ Dec 13 2007, 10:38 PM) What to do if there are mobos have vdimm limitations? Vmod the motherboard Let say it only support up to 2.1v,but with that current voltage is not enough. So whats the option to get above 2.1v?  -pWs- |
|
|
|
|
|
Dec 14 2007, 06:50 AM
Return to original view | Post
#234
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I think you have check first.
My Brisby 36 @ 3GHz only need 1.45v. QUOTE(dblooi @ Dec 14 2007, 06:50 AM) offtopic Wait until 125 pages 1st bro -pws- , is time to go V4  -pWs- This post has been edited by -pWs-: Dec 14 2007, 06:50 AM |
|
|
Dec 14 2007, 08:12 AM
Return to original view | Post
#235
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(mod99 @ Dec 14 2007, 08:04 AM) hello guys.. noob here. Just locked your PCI-E to 100MHz will do I got 1 qstion. I wanna learn oc but firstly i need to know how to lock my sata port to prevent my hard dsic from corrupted. me using biostar ta690g here. Pls help guys.  QUOTE(ocz @ Dec 14 2007, 08:06 AM) Bro dblooi, its hard to catch up with u. Haha...you go for LN2 confirm can  3++ secs gap in super PI.   -pWs- |
|
|
Dec 14 2007, 01:53 PM
Return to original view | Post
#236
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
What power supply u use?? Model??
-pWs- |
|
|
Dec 14 2007, 02:26 PM
Return to original view | Post
#237
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(rainingzero @ Dec 14 2007, 02:13 PM) i suspect the problems comes from his PSU.... maybe need to try other PSU?? suppose the rams wouldn't bottlenecking his ocing... QUOTE(jeromeccm @ Dec 14 2007, 02:22 PM) i am using a cooler master 450watt real power I think your PSU having problem too. Do you have other PSU to try??here is the link. http://www.coolermaster.com/products/produ...cate=173&id=192 I bought about 5 months ago. QUOTE(tapirus @ Dec 14 2007, 02:20 PM) s#it...mine can boot and run super pi at 3.55GHz 1.525 Vcore and 2.2 vdim..usind 400 divider...but i try orthos failde around 15 minutes..WTF...should i increase more vcore... idle 42 load 54 pwm when load around 74 I doubt you can orthos for long time @ that speed. Kinda hard  ...it's consider stable if we run orthos with divider 400...then pass for 8 hours..after that we change divider to 533 @ above...got any different in stability or not???should we run orthos back??? -pWs- This post has been edited by -pWs-: Dec 14 2007, 02:28 PM |
|
|
Dec 14 2007, 02:42 PM
Return to original view | Post
#238
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jeromeccm @ Dec 14 2007, 02:33 PM) hmmm.... PSU problem... sorry dont have other PSU.. Cannot take it meant?? when i dont OC, my PC can run 24/7. when o OC the buss speed to 220MHz with the rest of the setting remain default, i also can run but when increase further, PC cannot take it already... I suspect is PSU problem. If can, try to lend one PSU and try.  -pWs- |
|
|
Dec 14 2007, 02:47 PM
Return to original view | Post
#239
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jeromeccm @ Dec 14 2007, 02:44 PM) Ok... got to look for volunteer already... ke ke ke..... I think so. i have a question... i notice alot of people here using 3800+ and can OC until 3.4GHz above.... does this means the 3800+ at 3.4GHz can out perform the stock 6000+ running at 3GHz?  But bear in mind that, 6000+ L2 cache is 2MB together IIANM. Provided that 3800 clocked @ 3GHz same as 6000+, 6000+ only win by a bit. -pWs- |
|
|
Dec 14 2007, 02:50 PM
Return to original view | Post
#240
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jeromeccm @ Dec 14 2007, 02:48 PM) yeah.. the menu can only change the bus speed, and cpu and ram voltage... i am sure this is not ment for hard OCers Clockgen nice and easy to use. by the way, the display CPU voltage and the CPUz varies also.... any third party OC tool? i notice in forum alot of people use ClockGen... -pWs- |
|
Topic ClosedOptions
|
| Change to: |  0.0405sec
 0.87
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 05:12 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.