kalau db boleh ganti F3 baru .....i bukan dengar ja oh....terus bubuh dry ice atas F3 loh
dapat -20C kasi core F3 pecah terus pun tak ape

---

Added on October 30, 2007, 1:05 pmdon't lah bro, i haven't figure out how to terbalik my mobo yet
btw bro, which waterblock r u using?

This post has been edited by ongbs: Oct 30 2007, 01:14 PM

I hantam 2.65Vdimm to my Micron 800 512Mx2 @1200MHz+ with 40mm fans blowing on top...
tested >48hrs, so far so good...still alive
But for 7/24 dunno how long it can last

My DDR2 with Vdimm >2.4V didn't feel any diff


My 3800+ F3 update :
previously only able to boot up XP and passed PI 32M @ max 3.5GHz,
after some burn-in now it is able to boot from XP@3.55GHz@1.625Vcore and passed PI 32M


I am using WC for both test (no iced water )

Full load Temp@62C, 42C idling Temp.

This post has been edited by ongbs: Nov 2 2007, 05:06 AM


Attached thumbnail(s)

only recom if got good cooler if set Vcore >1.5V, stock cooler i believe can't boot to XP @3.5G, at 1.6Vcore, temp increase is terrible!

unless your proc is dxxn good that can boot to 3.5G <1.5Vcore

This post has been edited by ongbs: Nov 2 2007, 07:21 AM

bro,

u mean the ram timing?

but the CPU-Z shown 1200+MHz wor???

ic...then i understood liau...
i thought u said keep below 1000HTT better

btw, new F3 update coming soon...tweaking memory now
actually @3.5GHz DDR~1200MHz SPI 32M tested 3 times already today.

now testing 3.56GHz HTT 1424MHz, DDR2~1200MHz SPI 32M .....

This post has been edited by ongbs: Nov 2 2007, 01:49 PM

now using 667 div, @356HT is about 1200MHz, HTT!1420MHz...PI 1M 24.6+s
max PI 1M stable is with Brisbane was DDR612@1224MHz 5-5-5-4-7-11 2T.

now you sneaking ah?

btw, which waterblock you r using?


bro pws, pls update my AM2 results (PI 32 results improved 1minute +)

ongbs | AM2 X2 3800+ F3 | 3560MHz | Abit AN9 32X | Micron 800 512MBx2 @ 1186MHz | 5-5-5-5-11 | Thermaltake + Swiftech mixed WC

This post has been edited by ongbs: Nov 2 2007, 02:29 PM


Attached thumbnail(s)

okok...ala berapa lubang punya??? Curious here hehe

haha bro,
busy buying ice again ah???

satu kali beli 50kg lah...then all night long you can OC kaw-kaw

Really hope you may help me to solve my weird PI 32M problem
3.5G with 29m result really malu leh....

But during PI 32M everything seem normal in my system woh.....temp/power and CPU Load all increased!

bro, then what caused mine PI 32M pulak?

your go 3.7G with just air cool?
Temp and Vcore?


This post has been edited by ongbs: Nov 4 2007, 11:14 PM

Dxxn, I was hoping my DFI UltraII-M2 will OC better than my Abit AN9 32X...

Just switch 3800 F3 to DFI and Brisbane 3600+ to Abit...

Turned up Abit OC better than DFI

F3 cant even POST in my DFI@3.4GHz....

Gonna check what happened!

Previously Brisbane in DFI need a lot of Tweaking to get >3GHz,
now in Abit within 5 minutes it already boot into XP @3070GHz....
now is testing PI 32M....

Walau eh...what happened to my DFI?

bro PWS and CV6149...HELP!

This post has been edited by ongbs: Nov 5 2007, 06:42 PM

You are right, previously my brisby need 1.60V in DFI to do 3GHz.
Now in Abit it almost finished 32M PI test at 3.07GHz@1.55 Vcore

-----------------------------------------------------------------------------

aiyo...it just passed PI 32M test....
Try to adjust Vcore to 1.525V and see what will happen...

This post has been edited by ongbs: Nov 5 2007, 06:43 PM

haiya...confirmed Abit AN9 32X better OC than DFI babe...

DFI only able to push my brisby to 3GHz but Abit lead another 100MHz more

My previous F3@3.5GHz slow PI 32M results, 29m+ caused by my old datuk PATA HDD (Quantum Fireball 6.4GB).

I just ghost the same XP to new WD 80GB SATA and the brisby@3107MHz completed PI 32M in 28m+

So far didn't know that HDD speed will affect the PI results (for PI 1M i believe the results does not affected cos PI 32M involve a lot of HDD access activities)

--------------------------------------------------------------------------------------------------------------------------------

AM2 3800 F3 PI 32M Update:

This is the correct PI 32M result (with faster SATA HDD now)

at 3.3GHz DDR2@1100MHz PI 32M result 23m+ compare to previous using old PATA HDD take 29m+ at 3.55GHz

This post has been edited by ongbs: Nov 5 2007, 11:17 PM


Attached thumbnail(s)

bro, see my NB Temp...daxn cun right?


Attached thumbnail(s)

so does it block your GC?
Me added a 80mm fan on it..from 45+ dropped to 35+

nice result bro

simple lah bro,

just add on a fan or just change to 3rd parties chipset cooler

bro,
for 3.5G OR,
try lower a bit on HTT (make sure it is not limit by HTT).

I believed the limitation is on the cooling side, what is the idling Temp @3.5G 1.6V?
OR fail after how long you run it?

ya bro looi,
you are so bad....keep them busy day and night, trying to break your record

So when is your Ipoh trip?
Kopi is waiting here...hehe!

This post has been edited by ongbs: Nov 13 2007, 12:21 AM

bro,
u mean use clockgen to increase HT?
With iced cool to get fastest PI 1M result?

My abit AN9 just been sold, now only left 1 DFI rig...will do it when my OC mood coming back

With abit AN9, limitation on my DDR2 and processor, just found out this DFI is much harder to OC