5-5-5-15??
come on bro..10th is crying u didnt treat her well..
make it 5-5-4-3-11@2.3v
shud not have side effect la..hehhe(i think )

---

Added on November 29, 2007, 12:32 amyeah..alot of new result......
and new problem also...whahahah

good luck to the new batch F3..

This post has been edited by CV6149: Nov 29 2007, 12:32 AM

new problem as in? have to eidt first post? or what??

To my knowledge, the only G2s available currently available in Malaysia are the 5000 Black Editions. Xtreme systems managed to overclock to 3.5GHz on good aircooling/normal watercooling, and 3.7-4.0GHz on extreme cooling (DI). After looking over again, G2 overclocks just as well as F3, but unfortunately still lags in actual performance by 0.1Ghz due to L2 cache latency.

biar my 10th crying, jimat letrik, wakaka..
i love to put loose timing, so no need to play with high vdimm, n summore mana ade value 5-5-4-3-11 in bios.. ..memset ok r..

my board didnt cry anything about HTL 1650,

can't wait to get F3 tonight..we want to do TT..so who at penang wanna join our TT + cod with mr.dblooi...u all are welcome...please refer to this thread if u all interested...

http://forum.lowyat.net/topic/558967/+300#entry14427208

p/s: just did a bit promotion to who have same interest with us!!!

This post has been edited by tapirus: Nov 29 2007, 02:47 PM

so u all reach home and overclock already???

Not we all just left..I just got back a short while ago.

Not gonna overclock mine yet, but will do some serious underclocking..wanna see how much performance I can squeeze out of it at ultra low voltage..

mine success oc 3400mhz at the moment and still prime...
if go 3500mhz it will need more vcore and the temp cannot be maintain by my fan cpu cooler - HOT
sudden shut down... cause by the temp sudden jump that will kill the cpu...
so play safe and stable is my goal... =.=
big thanks DBLOOI =.=

Congra...what Vcore needed for that speed??

-pWs-

1.45 Prime Stable for 45 minutes at this moment...
hope i dun need to add more vcore to prime 24 hours.........

Wow...not bad. Try higher ...

-pWs-

already tried....
but if i put 3420 till 3500 system will hang when prime... the pwm is 100'C over if pump more vcore ... lol

at this clock and vcore... pwm maintain at 85'C
maybe this is the best i can gain liao... unless have good cooling... or good ram

This post has been edited by cyberloner: Nov 30 2007, 04:34 AM

let us know the result also...

u are the god of underclocking which is in the different class of ur own....
very envy ur skill la....

yaya different class~ but still godlike

Anywhere last night u told me beside 3M tape another tape i should use is??

later i need buy it tonight will OC kaw kaw my new toy~ F3 + D9GKX

To V2 F3 3800+ owners,
if can please submit a Pii 1M result to the database
thanks

http://forum.lowyat.net/topic/321443

F3s from me are good in both overclocking and underclocking

This post has been edited by dblooi: Nov 30 2007, 09:01 AM

bro u told me last night that if can use subtiming then it can by pass something can tell me more about that?

coz i see my mobo could suppoer 0.5 multiple~ but did not try yet

DFI ultra2-M2 need to flash to a proper bios before you start oc
bro -pws- and CV6149 have experience on that,
maybe can invite them to share their opinion, again
0.5multi use on 90nm proc ( others nv try b4, F3 3800 confirm can) can cause memory controller bug
u want oc ur ram how high also no problem,
next time i show to you
the sub timings , take note of trfc and MAL
some mobo , default MAL for all memory dividers is too tight
Biostar TF6100am2 and DFI ultra2-M2 are known to have this issue.
for ultra2-m2, problem can be solved by flash to proper bios (modded bios from rebelshaven i guess, but i dunno which version )
for trfc, since you are using D9GKX now, just keep it as 75NS will do
if you feel like your ram is bottlenecking the oc when u go to higher clockspeed ( 3.5G above)
can try to slightly loosen this timings, it might helps

edited: off topic, hey tonight u going pc fair? if yes remember to bring my umbrella

This post has been edited by dblooi: Nov 30 2007, 10:00 AM