Heard the punch list for this Kasawari phase 1 CPP is a nightmare haha good luck to carry over the work at offshore Bintulu.

Yes, heard the same and vendors waiting to charge more for works offshore

It is epcic right? So mmhe yang tanggung.

yes EPCIC - MMHE and Technip in a joint venture.

Commissioning also fixed price lumpsum.

Hancur la like that... Kena late penalty lagi.. I have not seen fabricators able to take up installation and commissioning scope yet. This would be the first.

If they manage to pull it off, I'm sure other operators would be more than willing to let fabricators do the job than in house.

Most of the EPCIC it is part of the fabricator / EPCIC contractor scope. MMHE has no T&I and has no commissioning assets. All outsourced, but risk is sitting with them / Technip MMHE JV as the main contractor.

The T&I is split into 2 subcons - Heerema and also Sapura.
There's few scopes, including floatover, jacket lifting, pipelines, WHP's.

The overall contract is very extensive and the platform has grown in size (around 10% weight) from proposal stage.

these punch list half baked items is going to run down the budget when operations starts. to top it off once audits starts going in all kind of non sense can be found from process safety, integrity , reliability safety etc.

which then itself will result in more run down of the budget for rectifying things rectified making for an endless loop of rectification.

This post has been edited by mhyug: Aug 11 2023, 11:34 PM

Those are the challenges and complications of commissioning a multi billion offshore plant.

Yeah, that is why I am not sure which CPP / major platform EPCIC in Malaysia yielded a lot of profit or any profit at all.

One I know is SKNC3 CPP

The floatover for Kasawari will be performed tomorrow

The Chinese navy must be watching the platform installation too.

https://www.freemalaysiatoday.com/category/...second-quarter/

MHB lost money in 2nd quarter 2023

This post has been edited by Stamp: Aug 16 2023, 10:51 PM

Yes - lost lots of money (Provision and non-provision).
Mostly from Kasawari.... Phase 1 CPP

Float over was a success.


Next up is the bridge installation.

Heard they were slapped with a hefty VO from the T&I contractor.

That’s a great achievement! Congrats to the naval archs, all of them locals, to engineer the heaviest topside floatover mating in Malaysia history!

Transocean Deploys World's First Subsea 20,000 psi Blowout Preventer

August 17, 2023

Offshore drilling contractor Transocean said Wednesday that the world’s first subsea 20,000 psi blowout preventer (BOP) had been successfully deployed from its Deepwater Titan drillship.

https://www.oedigital.com/news/507294-video...owout-preventer

T&I done by heerema?

Few scopes, some are sapura.
Topside cpp float over is Heerema, correct.

The pipeline is sapura