Hi guys , does anyone settled with buzzing Noise from ceiling fans? It is very uncommon for me as 5 of my total 6 KDK ceiling fans facing this problem. Is just ceiling fans issue or my house wiring issue or voltage unstable? Is this worth to be fixed? or just buy new one instead? If buy a new one, any brand/model recommended?
This post has been edited by kc9988: Nov 20 2022, 01:53 PM
Hi guys , does anyone settled with buzzing Noise from ceiling fans? It is very uncommon for me as 5 of my total 6 KDK ceiling fans facing this problem. Is just ceiling fans issue or my house wiring issue or voltage unstable? Is this worth to be fixed? or just buy new one instead? If buy a new one, any brand/model recommended?
Have to dismantle whole thing, take out the board and replace capacitor - only cost a few RM each but you need a soldering iron.
I ended up replacing the fans that did this as eventually it would happen again after a few months and it was a hassle taking down the fans each time
But if you replace the fan, you still need to take down the old one, and put up the new one. How is this different from taking down the old one, repairing it, and then putting it up again? Just a bit of extra time vs a lot more cost of a new fan.
Edit: Actually, unless it is a bearing change, I don't take down the fan. I just take out the PCB of the fan. After all, the PCB is accessible from the bottom.
This post has been edited by stormer.lyn: Nov 20 2022, 08:26 PM
But if you replace the fan, you still need to take down the old one, and put up the new one. How is this different from taking down the old one, repairing it, and then putting it up again? Just a bit of extra time vs a lot more cost of a new fan.
Edit: Actually, unless it is a bearing change, I don't take down the fan. I just take out the PCB of the fan. After all, the PCB is accessible from the bottom.
The new fans I replaced with didn’t have this issue crop up again so didn’t have to do the repair multiple times .. maybe the repair didn’t last long as my soldering skills are crap
The new fans I replaced with didn’t have this issue crop up again so didn’t have to do the repair multiple times .. maybe the repair didn’t last long as my soldering skills are crap
Oh okay. If the problem doesn't repeat with the new fans then it makes sense. Plus you get new fans!
Hi guys , does anyone settled with buzzing Noise from ceiling fans? It is very uncommon for me as 5 of my total 6 KDK ceiling fans facing this problem. Is just ceiling fans issue or my house wiring issue or voltage unstable? Is this worth to be fixed? or just buy new one instead? If buy a new one, any brand/model recommended?
Get a fan expert from kdk to check the fans. Mostly normal electricians will not ground the wiring properly. Another problem is the clip that they forget to remove b4 finish installation.
Call the service center and pay the fees, kdk can last more than 10 years.
This post has been edited by pgsiemkia: Nov 20 2022, 10:58 PM
Hi guys , does anyone settled with buzzing Noise from ceiling fans? It is very uncommon for me as 5 of my total 6 KDK ceiling fans facing this problem. Is just ceiling fans issue or my house wiring issue or voltage unstable? Is this worth to be fixed? or just buy new one instead? If buy a new one, any brand/model recommended?
3 of my 6 kdk had this problem. besides humming noise, fan speed also affected. 3 speeds became 2. Speed 1 was ok, speed 2 was about 70% what it used to be and that was the fastest it could go. fan will beep pressing 3 on the remote but speed didn't increase.
for me, changing capacitors fixed the problem on those 3 fans. my fan pcb has 5 caps and a set of them costs around RM 10 on shopee. another option is to change the entire pcb if you don't want to solder but each board costs around RM 40 - 80 depending models.