Oct 25 2022, 08:32 AM
QUOTE(Maxieos @ Oct 20 2022, 07:34 AM)
Not missing but busy.
I apologize for not replying.The updates
1.Sunday no technician.So I suggest to increase the heater to 75% hotter ( basic 50% before it get less hot ) and spray into the water tub.I confirm that the water is not hot and I forgot to mention , the water flow is also slow.
2.Monday call 3 technician , all 3 said no need to put extra RCCB outside since all new or old water heater have Elcb build in.All 3 technician said something stuck cause it to get water not hot.
3.Tuesday , Call again to main joven and panasonic technician for repair but need to book the time next week and the cs said go to electrical shop and choose a model
4.Yesterday plan to go out and have a look for the model , heavy rain , didn't go out.
5.Today , see whether still rain or not at the evening. as what Momo33 said , buy water heater first , then only find a good technician.
All technician also didn't recommend to have an extra RCCB , i really don't know why as they said all buid in, no need anything extra.
As some technician told us better change but some said can fix.Most of them doesn't have cert or just normal electrical technician.
I also don't know which decision to choose where the water heater is less hot and water flow very slow.If water flow slowly should be much hotter.
Anyone know what is the reason of part failure when water heater not getting hot ?
Now finding a good water heater but budget not over rm400.
Any suggestion for DH-3MS1 and DH-3N series ?
Thanks , will reply to you all but I don't really understand much on those DB and model and brand.I need to research more into it.SOrry for not updating in time and thank you again
Looks like you have all advises you need on water heater. I was away from PC for at least 2 weeks now I apologize for not replying.The updates
1.Sunday no technician.So I suggest to increase the heater to 75% hotter ( basic 50% before it get less hot ) and spray into the water tub.I confirm that the water is not hot and I forgot to mention , the water flow is also slow.
2.Monday call 3 technician , all 3 said no need to put extra RCCB outside since all new or old water heater have Elcb build in.All 3 technician said something stuck cause it to get water not hot.
3.Tuesday , Call again to main joven and panasonic technician for repair but need to book the time next week and the cs said go to electrical shop and choose a model
4.Yesterday plan to go out and have a look for the model , heavy rain , didn't go out.
5.Today , see whether still rain or not at the evening. as what Momo33 said , buy water heater first , then only find a good technician.
All technician also didn't recommend to have an extra RCCB , i really don't know why as they said all buid in, no need anything extra.
As some technician told us better change but some said can fix.Most of them doesn't have cert or just normal electrical technician.
I also don't know which decision to choose where the water heater is less hot and water flow very slow.If water flow slowly should be much hotter.
Anyone know what is the reason of part failure when water heater not getting hot ?
Now finding a good water heater but budget not over rm400.
Any suggestion for DH-3MS1 and DH-3N series ?
Thanks , will reply to you all but I don't really understand much on those DB and model and brand.I need to research more into it.SOrry for not updating in time and thank you again
On old water heater not being hot, very likely that there is calcium carbonate build-up inside the copper piping at the heating elements. This will cause heat transfer to the water less efficient and waste of energy. I'm assuming that you are comparing the heat setting when the heater was new compare to how it is performing now. It is good idea just to buy new water heater.
Like one said, when incoming water is colder than usual like during rainy season, you do find that you need to turn the knob higher to get more heat.
This post has been edited by Zot: Oct 25 2022, 08:33 AM
Quote
)
0.0203sec
0.66
7 queries
GZIP Disabled