sifu please advise

getting 2 separate contractor to

1. lay floor tiles
2. install new gates

which one should i do 1st

tq boss

will take your advise

just did mine, cost me RM4K++ for a mild steel folding 16.5ft gate + galvanized + powder coating

will only get an autogate at year end due to flat broke

price much cheaper then the few shops in serdang (house near there)

found it in FB page, scroll through their catalog and found thousands of photos and good reviews as well

they also did some steel work for shop in shopping mall & wedding shop at SS2

I go curi tengok and touch and find their work quite decent

btw what you mean by "comes in plates"?

they did give me an option to make it as smooth as aluminium but i prefer the rough surface

you try google Three Kim Metal Works

they have facebook page which they update quite frequent

he did bring along a sample and let me touch

one is smooth surface, one is rough

not as smooth as aluminium thou, rough one is like standard PC casing surface, smooth one is slightly smoother but you can feel the different

What is the cost of installing the autogate?

Wiring and the arm already ready

A friend quote me RM420

klang valley

just a normal arm on folding gate

Is it possible to just change the autogate board

Pretty sure mine KO but the arm still in good shape

My d'nor serial 2 auto gate KO

Arm still okay, just the board KO

Is it possible just to change the board

Must used back same brand same model or any compatible will do?

How to know whether it is screw or rotate type?

Exactly like this.

So this type can just change the board without replacing arm?

Too complicated for me.

Any good installer to recommend?

In seri kembangan.

The current one was installed by a forumer here roughly 5 years ago.

Can't recall his name thou

This post has been edited by loui: Feb 3 2025, 02:45 PM