Thanks for the help. Confirmed board problem as got dc voltage from transformer. Change the board and everything back to normal.

no idea how to dismantle plus dont have knowledge for this...
better let pro take care of it while utilise it before making decision...


actually we do plan to install new underground autogate to replace the old one, but seem more practical to install non underground type for future maintainance...
spare part and service are more easier in long term,right?
but my FIL say insist underground autogate are more reliable and long lasting....really?
i wonder how they get those assumption? i dont see any different apart of ugly old fashion design....

frankly speak, we only looking for practical and reliable autogate for long term use....
feature n outlook not important as u can see the old gate are so out fashion but we only intend to change the autogate system for use....
now it take long/few time to open/close the gate are quite troublesome especially during rainy day & oso safety purposes.....

so far, dnor 212k and dnor880 seem quite ok for me....
but due to my pillar size, i think dnor 212k seem better as only require smaller place for the bracket.....
need to measure my gate n pillar size to see which type are more suitable replacement....

btw, anyone use MAG autogate before?
is it good?
my FIL insist of using the MAG autogate for replacement....
so far i only heard of DCMoto and dnor in forum....

Actually most of the system are good enough for any hse gate as long the system are install properly.

Anyway for those arm system is better to hv those with key release so will be easy to release the system for manual pull or push open close then the most lowest end model which only use allen key which u need to put something to block the gate when remove arm arm from gate.

Small pillar no problem for any system as long u hv the ready add on bracket to hold the motor bracket on the pillar wall.

Well std for user some old ppl they will prefer to use back what they use b4 then to hv headache later when going for other brand. For us especially those using DC Moto 925W model will not go for other brand model if replacing their old faulty unit or for their new hse or relative hse.

MAG model is actual OEM from OAE brand. As mention most of the gate system in the market is good enough for any hse gate as long install properly.

Hi all.. i am using DC motor...
Today my neighbor house got install new motor and i ask the guy come and help to screw the housing of the PCB board back to wall... when he open the housing he check battery and told me battery spoil already. So i ask him to remove battery since i was told the gate should be able to work with house electricity supply.

Now my gate can no longer open fully. After opening about 70% it will automatically stop. Both left and right gate same issue.

Anyone knows if somehow got settings i need to change?

I call back the guy.. he told me tomorrow he will try install new battery and maybe it will fix the issue... haizzz...

For all type of autogate system is advisable to replace 2 years ++ to prevent damage battery from short circuit the board.

If the system board act kind of funny can try off the main supply for 5-10 second to reset the board. After that can on back the system and try open close a few time to see the system can go back to normal function. First open will be slow dun worry because calibrate the gate pressure, when close back normally will go back to normal speed.

All DC system can work without backup battery but something some board need to put in backup battery to run properly due to not power to motor.

SLA battery goes kaput around 2 years plus.

Some of the board needs the battery power to drive the motor as the AC power is being used to charge the battery only and doesn't have enough output current to drive the motor despite converted down to the required DC voltage level. The battery is cheap about RM50 only from Shopee.

thanks both...
so update, and i learn something new today also...
actually, my previous battery apparently already kaput....i left it there and the gate works as normal...

but yesterday took out the battery and then end up the gate cannot fully open...

so today the service guy came and install the battery and my gate not works like normal again...

very strange, assuming if my old battery already KO (the service guy showed me, he shorted the battery terminal positive and negative and nothing happens), so it looks like the system needs to somehow detect a connection to the battery regardless if the battery is working or not?

i'll also try to take note now and replace it every 2 years...i was charged RM90... noted on the RM50 from shopee.

Thanks!

been tested positive before deepavali....
jz recovered.....

bro
u only selling dnor/dc autogate?
any model recommended?
only looking for normal use open/close only....no need fancy stuff...

btw, i see some forumer ppl talking about dnor880 n dnor212k....
how much for the set include installation?
plus, do you provide service removing old underground autogate? if yes, how much charges?

This post has been edited by Darren: Nov 7 2022, 02:09 PM

Normal model arm screw type
Dnor
712 use allen key to free arm if got problem with system RM1,180/=
212 same as 712
212K with key release to free gear if system got problem RM1,500/=
Turbo 880 RM1,580/= might go up in price next week due to currency exchange for part from over sea.

DC Moto 925W RM1,780/=

All the price are for new installation only within Klg valley

If upgrade or replace from old system min charge RM100/=
Take out imbedded old set normally just let it as it is. Because take out a lot of job.

Anything else can contact us at 0122019294 Alex Lee

This post has been edited by dblcss: Nov 7 2022, 08:14 PM

Deleted

This post has been edited by monodevil: Nov 9 2022, 09:38 PM

Hello boss. I have almost same problem. My right gate open n close very fast while my left gate open n close very slow. Do your problem resolve by reset the autogate?

If reset the board, do we need to pair back the remote control again?

Hi guys, is the autogate switch rocker type or same like those light switch?

more like push button , not light switch

Thanks

Anyone using dcmoto 925? My installer say cant install left and right push button, only 1 push button for both gate

If reset no need to pair back the remote

Std for DC Moto board only hv connection for stop and open both side n close only for wired connection. Dnor board will hv connection for left or right one side open and open close both side. If want to connect to normal wired push button then need min 4 wire and a 3 buttons push button which I dun think so any brand selling. Can buy normal single small size button push button dismantle and put into a normal 3 gang switch.

Anyway happy trying

@dblcss How much to change the backup battery?

Just buy out side and DIY ard RM60-80 only.
If get from us there will be a min RM100/= transport fee within Klg valley.

Make sure to turn off the mains so you don't accidentally touch them when doing so!
The box is usually very cramp inside.