downhill turn off engine like hotlink advertise

The All new YZF-R1



* State-of-the art race technology
* 180 PS @ 12.500 rpm
* Yamaha Chip Controlled - Throttle & Intake
* 6-pot front callipers with 310mm discs
* Slipper clutch


Engine type: Liquid cooled, 4-stroke, DOHC, 4-valve, forward inclined, parallel 4-cylinder
Displacement: 998 cc
Bore x stroke: 77.0 x 53.6 mm
Compression ratio: 12.7:1
Maximum power: without induction : 132.4 kW (180 PS) @ 12,500 rpm / with induction : 139.0 kW (189 PS)
@ 12,500 rpm
Maximum torque: without induction : 112.7 Nm (11.5 kg-m) @ 10,000 rpm / with induction : 118.3 Nm (12.1 kg-m)
@ 10,000 rpm
Lubrication system: Wet sump
Carburettor: Fuel injection
Clutch type: Wet, multiple-disc coil spring
Ignition system: TCI
Starter system: Electric
Transmission system: Constant mesh, 6-speed
Final transmission: Chain
Fuel tank capacity: 18 L (3.4 L)
Oil tank capacity: 3.83 L

That YZF-R1 is 2008 spec kah ?

The price?

wow,nice one..

Guys, got any pictures of the Full Chromed C70 ??
I saw once it's really unique on the road.

So if i want to clean my bike from inside out, where do i start ? Thinking of converting into chromed styling....

wao...the R1 looks nice...very nice indeed...

any plans of getting one ?

haha...its one of my dream bike too....might be getting it in the future..if can afford la....hahaha

i kinda dont like r1 design..
but it seems that yamaha added the 2 air intake below the front lamp..
if u looked at 2007 r1 u will notice..

do u know how much is it? and hows the payment thing works?

that one i'm not so sure...but if i'm not mistaken from what i saw in mbc forum la..a 2nd hand R1 or honda CBR costs around 50-60k range....

whoa...even 2nd hand ones so expensive...

Of course.. new 1 should cost over 100k meh..

yup it's because there is no official importer for CBU yamaha bikes, thats why the price is so expensive,
on the other hand, there are an official importer for all kawasaki bikes and sparepart -> kawasaki sunrock sdn. bhd.
usually u can see that zx-10r is selling cheaper than other 1L bikes..

when i press disc brake it coming "ji ji ji" sound, is it brake shoe times up?

Anyone know what the price for Yamaha 135LC with clutch price right now ? Sigh hope really can get a bike man !

Yeah, probably your brake shoe has worn out. Metal against metal makes the screeching sound, it's your cue to change.

yeah,change brake pad

Guys, I have this Yamaha Lagenda 110 with bad condition due to recent accident, been looking/asking around cheap workshop/bike shop in KL/Selangor to sell off this junk before it gets rusty.

However the price been offered to me are unacceptable and unfairly low, highest I got so far is only 1.5k. The only problem with the bike are the brake disc, cover set and bent gear shifter which only cost not more than 500 bucks for repairs. Anything beside that are still intact and working good.

So, is there any shop I can ask for a fair price? I saw in 2nd hand shop or magazine this bike still can sell more than 3k. I'm not sure the price, but expecting 2k. So how?