hurm..mybe u can use bondo filler..put it on the crack area and sand it..but then ull need to spray it to black..a bit costly..
Need help on my casing..Cracked plastic..
|
|
 Sep 23 2007, 03:04 AM
Return to original view | Post
#1
|
 
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated   
|
|
Quote|
|
|
|
|
Sep 23 2007, 04:22 PM
Return to original view | Post
#2
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
yup..use some epoxy n bondo..but need skil..if u not confident enuf to do dat, u can ask pro to do it..
Added on September 23, 2007, 4:23 pmyup..use some epoxy n bondo..but need skil..if u not confident enuf to do dat, u can ask pro to do it.. This post has been edited by renesisx: Sep 23 2007, 04:23 PM |
|
|
Sep 25 2007, 01:32 PM
Return to original view | Post
#3
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
yup..i think u still need some bondo and some sand paper with a suitable grit..hav u find is at hardware shop?or if u r in penang area u can ask it from bombman..
This post has been edited by renesisx: Sep 26 2007, 04:48 PM |
|
|
Sep 26 2007, 05:57 AM
Return to original view | Post
#4
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(dkcc87 @ Sep 25 2007, 06:59 PM) Wah so expensive ah?how come?what is the main usage of the glue? er..wut do u mean?the case or the epoxy?   the epoxy only cost less than 10 bucks.. it works as a strong glue.. |
|
|
Sep 26 2007, 04:49 PM
Return to original view | Post
#5
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(ianho @ Sep 26 2007, 03:21 PM) Ya teh epoxy will work. Just use it on the inside. Then squeeze sum into er..uncle..the epoxy itself is enough to cover the crack?i think the crack is quite big..the gaps in the crack. Leave to harden then sand it down nicely n paint back matt black. shud look ok. |
|
|
Sep 27 2007, 11:43 PM
Return to original view | Post
#6
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(zeropulse @ Sep 26 2007, 11:19 PM) Thanks for all the advice..but i think i messed up big time..after epoxy and bondo thingy..it still cracked..geram d...now it freaking ugly..and i used too much of the bondo thingy..got extra lump...sigh..sad la.. haih..how much did u apply it?notb too much,enough to cover up those cracked thingy..then juz use sand paper to sand that lump.. |
|
|
|
|
|
Sep 28 2007, 03:07 AM
Return to original view | Post
#7
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(zeropulse @ Sep 28 2007, 12:55 AM) applied quite a lot due to n y noobness...it looks ok la...but ugly..will take a pict lol..its ok..juz sand it until the surface bcome flat and hav d original like..post up some pics so that we'll know the result of ur epoxy and bondo.. |
|
|
Sep 28 2007, 01:02 PM
Return to original view | Post
#8
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(N's @ Sep 28 2007, 03:20 AM) i think u use too much force when u sand it, thts y crack gain mybe..but as uve apply the epoxy, there should b no problem for it to crack again..unless if its not properly hardened..  B4 apply the epoxy make sure u sand the surface so that when the expoxy harden, it can make a stronger hold. Need atleast 1 day to harden man! . good luck.  |
|
|
Sep 29 2007, 12:39 AM
Return to original view | Post
#9
|
|
Senior Member
959 posts Joined: Aug 2006 From: Gombak,Malaysia Status: Its Complicated
|
QUOTE(zeropulse @ Sep 28 2007, 09:57 PM) FYI..it's new..LoL haih..juz sand a bit more la bro..i think now is looks better..still u hav to put more effort on sanding it..  |
|
Topic ClosedOptions
|
| Change to: |  0.0192sec
 0.52
 6 queries
 GZIP Disabled
Time is now: 21st December 2025 - 09:13 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.