https://www.keluarga.my/patutlah-sangkut-la...uka-lebih-awal/



beside plate number on the bumper for best result.

no..the best way is to dump the sticker

not in cermin?

according to the article, no

on roof better

Buy roadtax holder. Put inside.

Rfid need to match with number plate ka?

you should stick on bonet... heat will powerup the RFID

stick on forehead then stick out head when passing toll

Maffaka mine is on cermin leftside. So far, all good except kesas tol at kemuning utama tol. So stupid when heading to kl from port klang, confirm fail. But when coming from kl can.

Stick on your D\B and flash it.

I imagine there'll be high risk of damage. All it takes is one stone to hit and break the circuit or the chip.

Put behind... Reach toll, do a reverse...

I got it when they do roadshow in petrol station. The technician ask me where to put. I say i dont know. You technician you paste lah where should it be. Then he paste on headlamp

put on windscreen

i estimate >98% success detection

Work like a charm.

Last time during free installation, the staff test the sticker with a receiver. For myvi lama, the optimal place is on the front windshield. Different cars have different effective location.

Didn't have any problem so far

Later bangla kedai cuci tengok eeeiiii apa yini sticker melekat kotor kereta…kasi cabut sama dia

I don't think this is Malaysian, but I'm guessing the tech applies since it looks the same on the surface.

https://headlightsticker.com/reader-sticker-placement/

Which part of front windshield? The windshield so big bro lol

Or one motobodo to bang the bumper

Top right (passenger side).

if u don't know how
just go to authorized shop...they will test it before letting u go

Mine stick at headlight already 3 years 100% success rate. Never undur.

put on the wiper. later on the wiper

stick on your tnGo card.

Huh?

Passenger on the right?🤔

i put mine on headlamp, pass 3 diff tol, all failed ....


go center they said, headlamp best place; they tested and say all ok. went to tol again. fail again

*cough**cough* ... what he meant to say was.... got vehicle with left hand drive la.....

Didn't they claim cannot be near metal?

Oh wai still got metal bumper?
That makes the technology not user friendly.

A question if i already got rfid for my residential area entry gate on one side of the headlamp can i paste the tng rfid on the same lamp? Will there be any disturbance? Or better to stick on the other side?

this one you use few times kena lumpur kena batu damaged already... this article guy think kereta simpan at home issit?

Stick it on your forehead la....

Stick on tyre..... Kool True story

Cool explanation.

Our RFID implementation seems to be the high reader position.

Pull a J turn and reverse in

If i recall, some of the toll sensor is mounted top only at an angle to cover both headlight and windscreen, whereas some have 2 sensors at top and at eye level

Is there any standard sensor mounting places that they are following?

Why cant they follow what Indonesia or Singapore do. This RFID sticker really a pain in the buntut. I went to few centre before successfully pasang.

1. Windsreen tak boleh because tinting and also due to continental car windscreen ada metal.
2. Headlamp tak boleh because you have headlamp protector sticker installed.

I was then HUH??? If this is the case, if one fine day all toll pakai RFID, I kantoi lar. They then suggest me to tear out my headlamp protector before they pasang. I refuse. After visiting few centre, finally manage to get it fix on my headlamp.

Moral of the story, our RFID implementation FAILED due to sub par technology used.

it work fine for me at headlamp
it depend on car height as well

Scrap the whole project.

Never knew windscreen can have metal content. Went ahead and read up.

Thanks for the info.

I also dont know. First time hearing it. Anyway, after pasang the damn sticker on my headlamp, going through RFID toll sometimes successful, sometimes not. I revert back to smart tag liao. I dont want to be the cause of traffic jam. Malu.

Smartag seems superior in this case if it can work through your windscreen with metal content.

1. Metallized windshields interfere with RF signals and are increasingly common. (Weird that why stick on headlights will have less metalized?)
2. Windshields significantly vary in height and angle. An angle that works for a standard sedan may fail on a higher SUV with a more vertical facing windshield. (This is what I experienced, SUV may or may not work on the windshield)

This post has been edited by nebula87: Jan 21 2022, 10:58 AM

put on top of the car is actually smart, out of sight out of mind, you dont need to see that ugly shit all the time unless you wash car and others cant see it unless they take a ladder to check
if really got people steal then they will also scratch your paint then can claim insurance and buy new car lulz

i'm gonna try stick it inside, like those road tax stickers

I've done this as well for both my cars, tested 2 areas on the windscreen (inside):
1. lower left (right above road tax)
2. upper left (roughly behind the sunshade)

Both placements had no difference and work 100% of the time on a daily basis...one hatchback and one sedan with different brand of tint films - fairly similar windscreen angle.

This is on a conti car with acoustic glass and tinting - so no idea why the guys at the installation centre would tell people conti cars with metalised windscreen won't work if you stick it on the inside.

So the RFID sticker inside the car does work.

And you can place anywhere in on the right side of your dashboard
The rfid required such close precession placement making it seriously unsuitable for mass rollout and high speeds

How fast you go when you approach the RFID lane?
Mine on headlamp used for 2 years never failed also?

I approached <20km/h. 99% success rate.

The 1% failure rate is because sometimes i forgot to topup ewallet LOL

material cannot handle the heat

Anyone know where toll operator place their RFID detertor??

Dont notice em anywhere above also

If u cant see it from inside car how u know it is still there after u stick

I think price should go up because more and more rempit ah beng mother bodo start using but ewallet balance 5 linggit, stick on mother's forehead la , put inside girlfriend puki

User abuse is just astounding

Ur rm35 will be gone in no time,

Just as planned, keep buying & help them to get richer & prosperous.

Mine I stuck inside using the road tax film after suggested by one /k. In the center part above the mirror on the dotted section where the tint usually don't cover. Also slightly left towards the passenger side and at least 5cm away from the roof.

Stick inside using roadtax sticker definitely works as long as it is 5cm away from metal.

If tinted maybe different story.

I stick it top left, 5+ cm away from top and left column.

So far works 100%. Myvi first gen not tinted.

There was a tictok video of some dude sticking it behind car plate and it also works.

got la. and i notice, every toll places it differently.

so that explains why some toll can detect, some toll cant. cant we have a standard place?

Yesterday I enter north-south with rfid, and I can’t exit.

Reason: tiada rfid. After investigate, tercabut during heavy rain when I jam in highway.

Not going to pay RM35 for replacement. Im good with smart tag since north-south RFID doesn’t link to tng eWallet.

Stupid system created by stupid people cannot even transfwrbthe ownership seamlessly ..

Are these stupid think the Car is drove by one person???

huh. then how it deduct?

Depend on my honestly. Pay cash based on the entrance I mentioned.

Next move is to submit complain for free replacement. If no replacement for free, just forget about it.

how tercabut during heavy rain

that thing stick like super glue

It didn’t stick well for mine.
I logged a complain before this and they asked me to pay to change. I didn’t agree.

guess the speed + strong wind + rain that flush it away.

hmm, i go however slow still will failed, tried it multiple times.

reverse and slowly go up still the same. The only time it succeeded was the first time i used it

got someone stick at no plate. work like a charm. lulz

stick on didi and erect it everytime pass by toll. its more effective, extended 2" moar

The only thing standardised in Malaysia is songlap.

Everything else is suka hati you.

same, all 3 cars in my household stick on the left headlight, ever since the beta test or whatever that gave free RFID + install.

never ONCE have rfid fail. Serious - NEVER. But if smarttec then got a few time la tiu

kesian to people keep on finding funny funny way

because there are no correct way to stick it
yesterday saw someone from KL reached penang bridge
his RFID is stick at the top of the windshield

This cny I saw alot of car reverse at rfid lane

stick on palm

when reach toll, just give '"the hand" & play star wars theme

Many here stick then see senget, proceed to peel off and stick again until adhesive no more sticking

Later complain RFID problem.

In term of location for detection, yes that's optimum. But higher risk for damage such as from stone chips and accident even a minor one.

why they released it before even having seamless end to end user journey experience

my old car had it on the headlamp. Was sticked by the TnG people during beta test. It worked like a charm and never once failed.

When I changed my car, i bought one unit and sticked it on my headlamp..same place. Kept failing all the time. Then asked for a replacement and sticked on the windscreen. Seems perfect now. Drove from KL to Penang last few days. No issues whatsoever.

If you are facing the car, top right side. IF you are inside car, top left corner. This to steer away from wiper path but not to put close to metal pillar or metal part of the car like >6cm away.

Abort toll booth. Use NPRS.

Probably your glass or headlamp is oily or not cleaned properly. I washed my car with water-jet cleaner and the RFID is still there for more than 3 years

put windscreen
100% success rate

Got people just stick it behind plate number. No one can see and safe from road gravel and washing as long as your plate number sticker hold

The main problem is that the transmitters at toll both are not all the same in transmitting power and positioning.

yes they are experimenting with different location and power to prevent cross talk
so far mine all good. latest is the plus highway. all works.

Can have 3 different RFID link to one e-wallet?

unker just got my 2nd RFID. my china lim ah beng add 5HP sticker is more durable than that shit sticker they delivered. Its so bad I decided to double wrap it in protective film (which taada! is thicker than their so-called weather proof sticker my ass). Lets not even get to the material for the antennae and the chip itself.

The 1st wasnt quite as retarded.

This post has been edited by Dezs: Feb 3 2022, 09:58 AM

https://www.therakyatpost.com/fun/2022/01/3...ns-say-it-does/

Possible. Mine was installed during early pilot stage.
Also my headlight a bit curvy.

Same for me. But so far detected well.

Ayam smarttag can pass toll at 30kmh, but this rfid sticker needs to break till 20kmh to cross.

High tech?

For those who stick on the head light. Won't it obstruct the light coming from the lamp or the signal light?

Not bad

This is what I told them. In the beginning they claim can go through faster. Certain place slower than walking also failed. Then I told them that, they just said sorry

Mostly transparent and the shadow part the light get refracted and it was just like nothing on the headlamp.

Best was is to stick it at your forehead

But ada orang gelak kita lekat pada lampu.

My concern is how good and strong the adhesive is. Will it last long enough to endure our climate? I've been thinking of moving it to somewhere else because of that.

previously saw someone stick at the car plate inner side.
Going to try this when i got my RFID.