I have 3 cheap routers
Main router is tenda ac23
2nd router is tplink dvg
3rd router is maxis c5v
Unifi pakej is 100Mbps
All bridge connections are using CAT6 cable
All bridge routers set to bridge mode n disable dhcp n have fixed LAN IP
QUOTE
Question 1
Ac23 bridge with dvg = ok
Ac23 LAN1 > LAN1 dvg
Ac23 bridge with c5v = ok
Ac23 LAN1 > WAN c5v
Ac23 bridge with dvg n c5v = not ok (both got speed around 10Mbps)
Ac23 LAN1 > WAN c5v
Ac23 LAN2 > LAN1 tplink
How to get max spd for 3 routers together ?
Ac23 bridge with dvg = ok
Ac23 LAN1 > LAN1 dvg
Ac23 bridge with c5v = ok
Ac23 LAN1 > WAN c5v
Ac23 bridge with dvg n c5v = not ok (both got speed around 10Mbps)
Ac23 LAN1 > WAN c5v
Ac23 LAN2 > LAN1 tplink
How to get max spd for 3 routers together ?
QUOTE
Question 2
Enable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 2.4ghz in dvg (users able to connect this)
Enable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 5ghz in dvg (users unable to connect this)
Enable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 2.4ghz n 5ghz in dvg (users unable to connect both)
How to make users able to connect to both freq in dvg ?
TIAEnable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 2.4ghz in dvg (users able to connect this)
Enable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 5ghz in dvg (users unable to connect this)
Enable 2.4ghz n 5ghz in ac23 (users able to connect both)
Enable 2.4ghz n 5ghz in dvg (users unable to connect both)
How to make users able to connect to both freq in dvg ?
This post has been edited by sitescope: Nov 28 2021, 07:13 PM
Nov 28 2021, 07:11 PM, updated 5y ago
Quote
0.0137sec
0.57
5 queries
GZIP Disabled