Hai this is my friends Xbox 360 which i water cooled it with Cooler Master Aqua Viva SLI

I made the front Skin but my friend made the rest...Do comment ok!!!

My own Xbox360 was died after i over baked it in the Oven hahahahaha...

Now I'm Xboxless hihihi....But that will not break my spirit to buy another one so i can water cooled it again..

Thank for watching guys....Nice to share it here.

This post has been edited by lksing78: Jul 30 2008, 08:59 PM


Attached thumbnail(s)

Sadly no more pic guys...I already close the XBOX and will be delivered to my friend tomorrow

but will mod mine as soon i buy a new one..


but here's a tip:

Just stick the X-clamp (the x- clamp is useful after all...hihihi) to the heatsink using 3M double sided tape (or any double sided tape)

And screw the X-clamp to the steel case...All screw are provided in the Cooler Master kit

The only extra is the washer and 4 long screw (long enough to be screw on the metal case,this is for the heatsink with pump install in it)...that's all

as for the GPU the water block is perfectly fit as the gab between the DVD-Rom is enough for the water block to be install.


Thanks for the support....Do free to PM me about the water cool project,be happy to help but don blame me if anything happen K.

I buy the watercooled yesterday from Low yatt at RM285...that all i pay.

and few sweat and 4 hours time...that's all

well this is my own XBOX that i skin it

this will make the picture more clearly

It's not 3ROD...hihihi


PS this is the last pic I took before it die on me


Attached thumbnail(s)

Thank you for the compliment

well I Skin the BOX meself..Took me 3 hour

So if u ask about the cost that will be

1)Carbon sticker 3ft X 4 ft = RM 38
2)Orange Taneka sticker 3" X 2" = est RM5
3)Chorome front panel = RM 84 (can get from www.play-asia.com)
4)And the look = priceless man

---

Added on September 17, 2007, 10:03 pmHold down ur horses man...I don wan to offer any service to mod it yet cause i need to do few test on it first.

Anyway what happen to ur XBOX ? If u having 3ROD I suggest u change the X-Clamp first u can find the tutorial some where in this forum that's is the cheap way to fix it

But if the X-Clamp replacement did not fix the the Problem and u fell your world is DOOM without your XBOX360 then we'll start to talk bout water cool it...




This post has been edited by lksing78: Sep 17 2007, 10:03 PM

Thank you....u can do it too,very easy

"All thing that created by man can be moded ,but all thing that created my God is untouchable by man"

Believe in it then you will make it...Simple fact.

This post has been edited by lksing78: Sep 19 2007, 12:04 AM

Possible...exp. PSP.

Wa lau eh ..No problem also want to mod meh

answer to ur question:
1)I not quite free right now cause in busy with Raya sales at my car accesory shop (location Serdang)
2)U don hav to change the X-clamp if u wan to do water cooling,cause u gonna throw the ori heatsink or post it back to M$
3)u don hav to mod if the BOX do not hav problem.


4)This is the list if u want to mod the skin
a)Chrome front panel can get from http://www.play-asia.com/paOS-14-71-dg-49-en.html
b)carbon sticker RM 38 ( can get from my shop)
c)Orange Taneka sticker rm 5 (also can get from my shop)
e)my worker charge rm 50 for the skin making (very difficult job, especially the breather hole)
So skin total is RM163

5)For water cooling
a)Cooler master Aqua gate Viva Duo RM 285 OR
Thermaltake Tide Water rm RM330(+ rm 140 for Thermaltake Aqua Blazing CPU waterblock,I'm gonna use this unit on my upcoming project.Coming to u soon )
b)Zalman ZM-RHS1 Aluminum Passive VGA Memory Cooler RM36
(I did not use this on my 1st project...not must but recommended)
c)Nyko cooling Fan for Xbox (very hard to find) est rm80
( i can take power source from the DVD-Rom but risky)
d)PC molex..this one cheap ,my house got many
e)workmanship rm (haven tinkin bout that yet )
so total Water cooled is RM 400 (for coolermaster unit)

think harder man..water cooling is not cheap toy to play with.Try to get your own stuff better.Maybe u can get them much cheaper then my price.
but i'll will only be free after Raya.So do ur shopping Now

This post has been edited by lksing78: Sep 20 2007, 01:00 AM

This is what I'm talking about...Tutorial Coming to u Soon
My new Frankenstein (Xbox360)will walk this earth again Muahahahahah...


Attached thumbnail(s)

Wow the legendary tot31..come to see my Frankenstein
yalo very hard to find thing in malaysia...no demand i think..i like to say something in the Cooler master unit
if u closely exam one of the picture u can see that on the CPU side the water block tubing is blocked by on of the "Kapasitor"(indon slang)
So u need to bend it aside.bid tricky there.

Good luck.

All IT.but me and my friend buy at Thunder Match 5th floor i think...

congrat...look like we hav new Frankenstein member soon Muahahhahaha....

---

Added on September 20, 2007, 10:55 pmOK how do I explain this on..I'll try my shot k
tot31 if u read this back me up ok..

OK do u know ATI latest high end graphic the HD2900XT(do search on the internet about this latest beast)..Well the GPU of this baby is almost the same as the GPU on the XBOX360 unit
the different is the ATI HD2900XT can render DX10 but on the XBOX360 it can render only DX9..but as for the raw power there are almost the same

as u can see on the ATI HD2900XT a large heatsink is place on it to cool down the GPU and they use fan on this
which is for XBOX360 the M$ people use a very cute little heatsink to cool down the GPU and also use under power fan and that little cute heatsink is not even enough to
cool down the GPU inside the BOX.not even the new improve heatsink on Elite is enough.People in Singapore already become a victim for 3ROD in Elite unit.And one of
them claim the play it for only one week..Suwei Gile lah tu

That is why people realize that the GPU need to be cool by other method..that is by water cooling it.Which is the Best and Risky solution for now.



This post has been edited by lksing78: Sep 20 2007, 10:55 PM

I like to point out that this is not 100% guarantee on solving the 3ROD on XBOX360 but it is the BEST and RISKY(a minor pin hole on the water hose can blown ur XBOX360 to sky high) method to minimize the 3ROD to strike back.

WARNING : Do not bring your XBOX360 to LAN party as it will possibly damage the water tubing while transfer process is being carried out.

Hahahaha just kidding there

Hai It's me again with my next watercool for XBOX360 project

First of all i like to say I'm sorry that I cannot make up step by step tutorial on my project

the reason is because the tutorial is already been written by Guardian himself( ),the only part that change is to change the heatsink to waterblock

If u know how change the X-clamp u don need a tutorial on how to put a waterblock to ur XBOX360

I attach some of the picture of my project...So look carefully and you'll know how's it's done.


Let me Present to you Thermaltake watercool : Frankenstein V2.0 watercool (24 hrs Leak test begin 10:45pm)

Enjoy the Pic




Attached thumbnail(s)

Hai again ,this will be my final part for my project..I have so much fun by sharing my thing here at Low Yat forum.

But it's time to move on...so here are finishing for my watercool project ...Enjoy

Feel free to put on your comment or complain on this thread and if there's any question I'll be happy to answer them for you


Attached thumbnail(s)

Priceless...

Ahhh I need to cut....I neeed a fresh BOX ahhhhh...a virgin one perhaps...Ahhh my brain...my brain is exploding with idea...hahahahahahha

Haik! wa kari mas....the bill is on the sekon (2nd)page on this thread...Is not that i don want to write about it..if u know how to change the X-clamp..u will see that changing the waterblock will be easier..the extra is u maybe need to blow hole for the water hose.Or u can ask me anytime.no problem one.

So sorry bud but i don hav the time now.busy with work...After Raya OK.

If water cool can 100% avoid 3ROD then I can put XBOX out of business...hahhahaha...just kidding there Bill
It minimize the 3ROD to strike back.

hahaha..me a pro...me only newbie leh..hihihi...see my avantar below

No i don do the mod for money....I just love something different that's all.

---

Added on October 4, 2007, 1:45 amU play pc right ...what is the benefit of watercooling inside a PC?
Same concept bud...

Is that ur PC rig...Nice and neat.

This post has been edited by lksing78: Oct 4 2007, 01:46 AM

To izaman

This is where i draw the power supply to drive the watercool system.



Attached thumbnail(s)