Seems the only choice left is A6500G but still using USB2.0 x2, HDMI2.0 x2 1.4x1

Why do you require the higher specced USB and HDMI?

If you can wait for the 2022 models from Hisense or any other brands, wait.

i bought this unit in jan RM1999 only now increase price and give stupid 77% but capped at RM5.




https://shopee.com.my/Hisense-4K-UHD-HDR-Sm...375.12015564529

Hisense Thailand has updated their website with the 2022 lineup. When Hisense Malaysia does the same, I'll create a new thread for that. No pricing listed yet; might see them listed mid June.

From Bing Translate:


U6H specs: Direct link here.
ULED Technology
Full Array Local Dimming
<100 Zones local dimming zones
60Hz native refresh rate
Up to 600 nits brightness
Game Mode PLUS VRR 60Hz and ALLM
VIDAA U6 Operating System



U7H specs: Direct link here.
ULED Technology
Full Array Technology
<100 Zones local dimming zones
120Hz native refresh rate
Quantum dots
Brightness between 700-1000 nits
Imax Enhanced Technology
Dolby Vision Image Technology, HDR10+
Dolby Atmos Audio Technology
eARC, FreeSync
HDMI 2.1 (x2 based on the UK specs)
VIDAA U6 Operating System



U8H specs: Direct link here.
ULED Technology
Mini-LED Technology
100+ Zones local dimming zones
120Hz native refresh rate
Quantum dots
Brightness between 1200-1500 nits
Imax Enhanced Technology
Dolby Vision IQ, HDR10+ Image Technology
IMAX Enhanced Audiovisual System
Dolby Atmos Audio Technology
VRR 120Hz and ALLM, FreeSync Premium Pro
HDMI 2.1 (x2 based on the UK specs)
VIDAA U6 Operating System



Now it's time for Hisense Malaysia to get serious about capturing the Malaysian low- to mid-end market.

My Vinnfier Hyperbar 500 refuses to turn off if connected to my Hisense 65A7400F TV using HDMI ARC
Anyone with the same exact hardware combination has the same issue?

It turns off fine while the TV is turning off but it turns itself back on after a few seconds while the TV stays off

Don't have this issue with my Xiaomi P1 55" & Sharp 4TC60CK1X. Both also use the same soundbar which is the Vinnfier Hyperbar 500

Does Hisense android TV support local digital TV and apple airplay?

Digital TV yes, Airplay i dont think so.

Thanks! Any TV would you recommend that has apple airplay compatible? Seems like many brochures just omit mentioning it.
I only know Sony google tv got support for airplay. Looking for 65inch tv

Try turning off HDMI CEC on the TV first. Turn off the TV. Turn off the soundbar. Then turn on the TV, then the soundbar. Turn on HDMI CEC. Then turn off the TV, to check if the power is resolved.

You're asking for ANY TV model in a Hisense thread. Okay...

So Hisense TVs doesn't support Airplay/2. Seems like the cheapest way to use Airplay/2 is to hookup a Roku TV device to the Hisense/other brand TV. The surest way that Airplay/2 will work is if you get an Apple TV and connect that to the Hisense/other brand TV.

Sony, Samsung and LG seem to support it. Go from there.

Will test this out. Thanks

Didn't work
I even tried with a new HDMI cable

The only thing I haven't tried is reset the whole TV
Maybe 1 day I will try doing that

Or perhaps the Vinnfier Hyperbar 500 is not fully compatible with the Hisense 65A7400F

As a standard, HDMI is not perfect. These things happen. It could be the Hisense TV. It could be the Vinnfier sound bar.

Sometimes something failed in the motherboard of either things which led to these failure. And sometimes the failure is not permanent.

My last suggestion is if the Vinnfier has any other input besides HDMI, say Bluetooth or 3.5mm analog, you could switch to that input and then turn it off manually. Since it's switch has changed to the other input, it should be able to be turned off. But of course, manually.

Yeah, been using the 3.5mm analog all this time, just wishing the HDMI ARC would work

If only the Xiaomi P1 has a 65", I would trade this TV in a heartbeat

That's not what I mean.

Use HDMI ARC with the Vinnfier for sound; I assume the soundbar is only stereo so 3.5 mm input makes no difference except for volume control.

Since if the HDMI-connected Vinnfier turns back on after the TV is turned off, it could mean that either it mistakenly thinks that the TV is turned on again. Or the TV is still sending signal while it's off.

So when you want to turn off the TV with the Vinnfier connected via HDMI,
1) Switch the input of the Vinnfier to either BT or 3.5mm.
2) Turn off the Vinnfier.
3) Turn off the TV.

Step 1 ensures that the Vinnfier only checks the BT/3.5 mm input for any sound signal coming in. This way it's not being told what to do by HDMI, that is turn back on.

The drawback of this is the extra steps needed to be taken before you turn on or off the TV. The upside is that you can control the volume via the TV's remote.

If this suggestion fails, it means the TV is sending a "no signal" signal via HDMI instead of sending nothing or 0 voltage.


EDIT: By the way, Hisense Singapore has started selling U7H and U8H. Their website reflects this as well as their Shopee listing. Interestingly, they seem to want to sell only 75" and 85" U7H.

The official Hisense store in Shopee Malaysia no longer has U7G listed. So I think the 2022 models are coming soon, just late to the party again.

This post has been edited by writesimply: Jul 7 2022, 12:09 PM

Finally! The issue is fixed by updating the firmware of my 65A7400F manually

A special thank you to stasio for highlighting the firmware update for the A7400F. Was scared at first to run the update because I'm afraid the update will screw up the TV somehow. But alas, the update worked perfectly

Now the ARC function works beautifully, when the TV goes into standby mode, my Vinnfier Hyperbar 500 also goes to sleep

Weird why Hisense Malaysia isn't pushing the L0205 firmware update
My A7400F was previously on K0811

This post has been edited by sHawTY: Jul 7 2022, 10:33 PM

For those who wants to update their A7400F firmware to L0205, here's the actual steps:

Download Link: https://mega.nz/file/wZhVzArS#q5t-1mKlCSjja...0068APS9KAfsZwY

Steps:
1. Download and extract the "upgrade_no_tvcertificate.pkg" file to the root folder of your USB flash drive formatted to FAT32 in MBR partition table
2. Turn off the TV
3. Disconnect the power cable
4. Insert the USB flash drive into any of the USB port at the back of the TV
5. Hold the power button on the remote making sure it's pointing to the TV IR receiver while reconnecting the power cable (might need help from another person for this)
6. Wait until the update process is complete. It will take a few minutes

Owh and a special reminder to all: The firmware update will reset the TV. Everything you've installed/downloaded into the internal storage of the TV will disappear

Important Note: The firmware update is only valid for Hisense A7400F TV with this service code:
HX65A6106FUW

Special Note: I am not responsible for any damage that might occur. Run the firmware update on your own risk

Have newer versions.....L0907 and L1212 (depend on service code)

https://4pda.to/forum/index.php?showtopic=1...ost&p=113062901

Thanks for sharing. I might try to update mine. Hope all goes well.
Is there a way to backup current firmware?

This post has been edited by alvinddm: Jul 8 2022, 12:56 PM

Hi. Is RM2699 consider a good price right now for U7G? Or later have a better deal?