Hi just to ask again that isit able to use Pencil to OC !the processor?

this is a old method use to OC....

pencil mod are use when using good old socket A system...

for now system...IMO...i think there are not much to do with pencil mod except to GC.....

I am assuming you want to do the fsb mod for c2d right? well, you need an silver conductive pen or a pcb repair pen

i think the TS using 478 system....

i believe the C2ds also have something like this too if i remember correctly from Vr-Zone

conductive pen.

mod proc fsb 800mhz-1066mhz.
mod proc fsb 1066-1333mhz

@tone
yeah, and since we are on that topic, do u know where i can get one of those? =( cant find em at jalan pasar

lol
i taught the graphite modd will do de trick !! but since u guys ay is the conductive pen i tri conductive pen lo!!

the pen is really hard to get.maybe someone shud open a bulk for it to order internationally

order a bulk ar???
IMO not many would buy it....
what bout using liquid silver conductivity??
the one that been use to unlock the socket A proc?

If im not mistaken saw someone selling conductive pen here in lowyat.. anyways if it works definitely try it on my Q6600..

Heres some details i found on the net:

http://www.xtremesystems.org/forums/showthread.php?t=132900

the Q6600 cant do it......
i have check for the Intel Instruction b4.....
this method jus can using on E6xxx and E4xxx only......
and the conductive pen i have ask b4,1 stick around RM200 .
and need to wait for 1 month shipment period......................

aiyo ..was really hoping it can.. guess just have to wait our for penryn then.. hope this Quad holds that long.

actually 1333 and 1066mhz got very big different as our eyes can saw it?
and the OC capability between of 2,almost same 1 i think.....(current me if i m wrong)
and if u no a heavy user sure can wait until the time.....

connecting these two pins should not be a problem without the conductive pen.. why not use a fine wire to jump these two pins.. I have used this method to OC my lappie last time.. works like a charm. It was a centrino 1.8Ghz 400Mhz btw

I think basically this pencil mod is useful with mobo that doesnt have oc settings.. all it does bump the cpu setting to run bus speed at 333mhz instead of 266mhz on Auto.

for the last time, pencil will not do the trick, mainly because it doesnt conduct well enough, and you dont want graphite falling into your LGA socket would you?

its mainly useful because instead of booting up at say 200fsb, you now boot at 266fsb, good for mobo's without oc options =)

Applicable on Pentium 4 S478 ?

THis method can be used on C2D only...But the conductive pen is not cheap too...Anyway it's a fresh method to enable other FSB.

whats that?

an fsb mod for mobos that cant oc or just because you want to boot up at a higher "stock" fsb =)

if fail to conduct the pins , did wrong to others .. then the processor will how ?

看热闹就好了!

if u fail to conduct the pins u wanted, u can or might kill ur processor, and that is why you need to put a tape over the other pins when doing the mod, so yeah, do follow the instructions as most bsel mod guides will ask you to put a tape over the other pins =)


wuts this? o_0

Off topic:
If u r looking for conductive pen or stuff, get some arctic silver 5. Its electrical conductivity is good enough for oc applications. Works well for Athlon XP to Athlon XP-M conversion; bridge closing.

This post has been edited by ff7yta: Sep 17 2007, 11:35 AM

Tried and tested....some mobo fail to detect the CPU after pin modding it. So its not a 100% working process even though the pins are modded correctly. Works best with a C2D 4300 proc....modding it to 1333FSB helps surpass the FSB wall. Other FSB procs like 1066FSB ones are just not worth the effort modding to 1333FSB..there is basically no gain.

Anyway...Artic Silver 5 would not work though its electrically conductive....still not good enough for pin modding. Conductive pen or silver pen is the best choice.

Pencil mod become popular to cheat Thunderbird multiplier and have free oc. That was back then in 2003

can pencil mod be used in gc card and ram?

And also the E2xxx and the Celeron 4xx series can be done with this method as well.

ya old method to amd

pencil mods might be risky..juz to surpass the 1333FSB wall

Yeah exactly bro..mainly if your sure of what your doing or maybe low budget users can use this method to break their proc FSB limits

can anybody answer my question pls?? appreciate it

no u cannot use it on the ram itself, but there are ways to bump the ram vdimm voltage with a 2b pencil on the motherboard or soldering a pot

and you can vmod a gfx card (vgpu and vmem) with a 2b pencil although some require more then a pencil mod(soldering, conductive pen etc..)

i did it on my ram last time..then in cpu-z it shows 500mhz..my ram only 133mhz..

huh?

care to share how to do it anot?

i just use a 2b pencil and colour the gold part...


Attached thumbnail(s)

Why not use wire mod? just use a thin string of wire then tie up those 2 pins together. But problem is to shift the wire away from the pin between that 2 pins. No marks and can be remove easily.

This post has been edited by GKWong: Sep 26 2007, 09:50 PM

since when my thread so many post one? bumb bumb bumb!!

lor.. thats a good contributors in your thread what. i`m oso din know pencil mod is still practicable now.

first thing...pencil mod on the rams itself is just not worth doing...no gain at all. The mod only mess with the Eeprom of the ram to make show higher speed ram.

As for CPU pin mod...use conductive pen. LGA775 no more pins. Wire mod works for pinned CPUs only. In fact, conductive pen marks can be removed easily too...just use nail varnish remover.

This post has been edited by extremeocer: Sep 27 2007, 09:08 PM

or high grain methylated spirit

so bro, u know where to get in spore anot? looking for it la

I am also in a need for finding a conductive pen long time ago. But dont know where to get it. Some said selling at very high price.
Now I am using conductive paint from RadioShack with a needle.

there are many types of conductive pen....normal conductive pen and silver pen...us silver, much better result.

Sim Lim Tower in Spore can buy these pens.

maybe i can use the conductive pen to paint on the processor plate!! that one i think more geng ! am i rite?

What are you talking about?.....paint on the plate???

just use the pen to draw a "C" shape line to connect the pins.

It works on my AthlonXP (ages ago). Conductive pen can be used but you need one which has a fine tip and you have to be very sharp.

Good luck

Can tell where u get it?? Cost around how much??

i knoe overseas is easy to get but u can ask those shop in jalan pasar!i trieed co coated wthe processor pins with the conductive pen it seasm like from 208A to 3.30 A duno isit spoil or wat!

You can get it from Pasar Road electrical shops but based from my experience, pencil works just as well

wau so cool..

Pencil only works on those Athlon XP where you just join the bridges. Pencil mod DOESN'T work on LGA775. Tried and tested with 5 types of pencil (HB, 2B, 3B, 4B and 5B). Whereas the conductive silver pen works like charm. Its also easy to remove.

u just repair the contacts on the processor ma!

I don't call it repair...it's more like joining the contacts.