Outline ·
[ Standard ] ·
Linear+
Thermalright Cooler
|
cstkl1
|
 Sep 23 2007, 01:15 AM
|
Look at all my stars!!
|
QUOTE(ianho @ Sep 23 2007, 12:20 AM) Even the ram coolers use 2 heatpipes per stick! Now, let's get sum 667 valuerams n pump in sum nice fat voltage n OC them to the skyyyyyyyyyyyyyyyyyyy.  
Added on September 23, 2007, 12:22 amY not? It will fit in all ATX cases. If u dont haf 7cm space at the top then just dont use the backside cooler. It will fit inside all ATX cases. but arent u getting some team rams?? pc2-1200.. they already have hr07.. |
|
|
|
|
|
cstkl1
|
Sep 24 2007, 10:54 PM
|
Look at all my stars!!
|
can fit dude only for full atx casing
mid casing like thermaltake tsunami its a gamble.. ngam ngam fit i think
tuniq tower height is around 150mm + 8cm side panel fan ngam ngam fit
thermalright ultra ngam ngam fit and have to remove the 8 cm fan on the side panel - 160.5cm
xigmatek HDTS1283 - 159cm.. have to remove the 8cm fan and have less than 1 cm.
stacker with the tuniq have to remove the fan on the side panel swing thingy... with xigmatek have to remove the whole side panel fan thing.
thermalright ultra aroound the same
ure ifx same lor...
sishh just realise
ITS INSANE...
|
|
|
|
|
|
cstkl1
|
Sep 27 2007, 03:46 AM
|
Look at all my stars!!
|
QUOTE(tskhang @ Sep 26 2007, 04:06 PM) Can use 120mm fan or not?  the retainers were for 92mm anything else is zip tie... heck u can even go 15cm as long ure zip ties hold.. if there is such a fan size |
|
|
|
|
|
cstkl1
|
Sep 27 2007, 04:07 AM
|
Look at all my stars!!
|
True
just finish cleaning up my 8800gts
really wanna see how much more can overclock ... now standing around 33 percent.. hopefully break to 50 percent
A3 revision rulez
anyways hope with the HR03plus+with Silverstone FM123.. can cool the gts enough or might have to volt mod the card..
there is a limitation to air cooling and i think this should be it
333x6
on stock cooler 675/1674/2106 - 3dmark06 - 11506
with MX2 702/1728/2106 - 11566
with this???
geee can it break the 1800 barrier without volt mod and also the 12k 3dmark barrier...
This post has been edited by cstkl1: Sep 27 2007, 04:12 AM
|
|
|
|
|
|
cstkl1
|
Sep 29 2007, 05:36 PM
|
Look at all my stars!!
|
QUOTE(tskhang @ Sep 29 2007, 02:53 PM) Has anyone tried putting 120mm fan on HR-03 plus? did that yesterday.. pointless the temps difference was like 2-3 degrees for another 106 cfm.. one on top.. and another with a zip tie on the first fan blowing towards the heatpipes. the big difference was on the ram sinks which gave about 5C less on the rams. and it was freaking noisy with 2xFM123 This post has been edited by cstkl1: Sep 30 2007, 02:43 AM |
|
|
|
|
|
cstkl1
|
Sep 30 2007, 02:29 AM
|
Look at all my stars!!
|
xigmatek...
|
|
|
|
|
|
cstkl1
|
Oct 2 2007, 12:29 AM
|
Look at all my stars!!
|
QUOTE(Edifier @ Oct 1 2007, 09:22 PM) The reason why u need the HR-07 plus and Duo  While many RAM manufacturers have tried to surpass the frequency mark of 1600MHz they were met with failed attempts, hindered by the obstacle of insufficient cooling. Acknowledging the challenge, Thermalright and Team Group have teamed up to achieve what was thought to be unachievable. Combining Thermalright¡¦s innovative design with Team Group¡¦s leading edge technology, we not only surpassed the mark of 1600MHz but much, much further ahead!! So what numbers have we reached with Team Group Xtreme TXD3102-4M2000HC9? more info AnandTechHR07eh big to differ... geil, supertalent, cellshock.. all have done it.. and the currently team is lacking in the race .. and practically out of it.. other brands has catched up most noteably is cellshock, supertalent, geil, mushkin... This post has been edited by cstkl1: Oct 2 2007, 12:32 AM |
|
|
|
|
|
cstkl1
|
Oct 5 2007, 01:18 PM
|
Look at all my stars!!
|
QUOTE(tskhang @ Oct 2 2007, 07:19 PM) What's the best way to remove the stock HSF on 8800gtx after removing the screws? Do you just pull it off or there is a way to do it? agreed i usually will set riva tuner fan to like 25 percent and then run ati tools for like 20 mins for artifact scan.. oh yeah all this after i removed the screws then only like off the comp take out the graphic card and move left to right slightly with a upward force .. |
|
|
|
|
|
cstkl1
|
Nov 7 2007, 01:35 PM
|
Look at all my stars!!
|
QUOTE(Edifier @ Nov 7 2007, 01:34 PM) Products coming soon  1. 939 Bolt-Thru Kit 2. HR-03/R600 - Kindda late dont u think3. Ultra120 Extreme 4. Ultima 90I 5. HR09 Type 2 6. XWB 7. HR01 plus 8. MST-9775 thanks for the support dude HR03GT?? This post has been edited by cstkl1: Nov 7 2007, 01:35 PM |
|
|
|
|
|
cstkl1
|
Jan 7 2009, 02:15 AM
|
Look at all my stars!!
|
i want the true black
pm me
|
|
|
|
|
Quote
0.0316sec
0.25
7 queries
GZIP Disabled