ASUS M2N-E, overclock
|
|
 Aug 29 2007, 11:58 AM, updated 16y ago
Show posts by this member only | Post
#1
|
 
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor   
|
yeah we know that this mobo is limited in oc...
voltage are too few and hope with later update to unlock more... so how to push this mobo to the max for now... my system as in my siggy. now doin 270x10.5 1.45v ram 1.95 (max olredy) timming default |
|
|
|
|
|
Aug 29 2007, 12:15 PM
Show posts by this member only | Post
#2
|
Senior Member
3,175 posts Joined: May 2006
|
use a pencil mod?
|
|
|
Aug 29 2007, 12:54 PM
Show posts by this member only | Post
#3
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
i'm using this mobo. yeah, it's a mobo with limited overclockability. my X2 3800+ only can be pushed to 2.45Ghz max (Vcore=1.38V, Vdim=1.95v, HT multiplier=3, CPU multiplier=10). this was limited by the lower Vdimm...
for my current oc, i decrease it to 2.4Ghz only (Vcore=1.38V, Vdim=default, HT multiplier=4, CPU multiplier=10) which give me much more stable system. some said, this mobo can be hardmoded (solder or pencil mod, something like that) to get higher Vdimm, but dunno how to do it... |
|
|
Aug 29 2007, 01:49 PM
Show posts by this member only | Post
#4
|
Senior Member
8,753 posts Joined: Jan 2003
|
u can see here..
http://www.xtremesystems.org/forums/showth...120#post1550120 last time i'm hoping also the option will be great for oc.. but end up change the board.. stable board indeed.. tried 2.6-2.7 on windsor.. |
|
|
Aug 29 2007, 10:11 PM
Show posts by this member only | Post
#5
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
QUOTE(rainingzero @ Aug 29 2007, 12:54 PM) i'm using this mobo. yeah, it's a mobo with limited overclockability. my X2 3800+ only can be pushed to 2.45Ghz max (Vcore=1.38V, Vdim=1.95v, HT multiplier=3, CPU multiplier=10). this was limited by the lower Vdimm... same here for my current oc, i decrease it to 2.4Ghz only (Vcore=1.38V, Vdim=default, HT multiplier=4, CPU multiplier=10) which give me much more stable system. some said, this mobo can be hardmoded (solder or pencil mod, something like that) to get higher Vdimm, but dunno how to do it...   , 3800+ windsor , 2.4ghz with 1.38v , stable , 2.6ghz with 1.5v , unstable .. |
|
|
Aug 30 2007, 09:40 AM
Show posts by this member only | Post
#6
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(8tvt @ Aug 29 2007, 01:49 PM) u can see here.. ty for the link,,, ok now what about the chances to flash to ASUS M2N-SLI Deluxe bios???http://www.xtremesystems.org/forums/showth...120#post1550120 last time i'm hoping also the option will be great for oc.. but end up change the board.. stable board indeed.. tried 2.6-2.7 on windsor.. can open ASUS M2N-SLI Deluxe oc option ka?  |
|
|
|
|
|
Aug 30 2007, 01:39 PM
Show posts by this member only | Post
#7
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
won't success i think.. though got option until 2.5v.. it's depends on hardware also..
so the best bet is vmod them like that link.. the bios updates can give some credit on oc better.. i've tried all the bios available last time.. got improvement.. still ok la.. by that time.. no other AM2 mobo around.. only crappy MSI.. and those super expensive board.. |
|
|
Aug 30 2007, 02:11 PM
Show posts by this member only | Post
#8
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(8tvt @ Aug 30 2007, 01:39 PM) won't success i think.. though got option until 2.5v.. it's depends on hardware also.. so by updating bios, can get improvements in terms on what??higher Vdimm??Vcore??so the best bet is vmod them like that link.. the bios updates can give some credit on oc better.. i've tried all the bios available last time.. got improvement.. still ok la.. by that time.. no other AM2 mobo around.. only crappy MSI.. and those super expensive board.. |
|
|
Aug 30 2007, 02:24 PM
Show posts by this member only | Post
#9
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(rainingzero @ Aug 30 2007, 02:11 PM) so by updating bios, can get improvements in terms on what??higher Vdimm??Vcore?? stability.. no other voltage option increase.. |
|
|
Aug 30 2007, 04:45 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
why no ppl shout up this mobo for a topic befo me ?
|
|
|
Aug 30 2007, 07:40 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(Mr_47 @ Aug 30 2007, 04:45 PM) why no ppl shout up this mobo for a topic befo me ? maybe they are waiting for someone with a lot of stars to start with...joking2...  so, how's ur progress on ocing ur proc??  |
|
|
Aug 30 2007, 07:47 PM
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Already a lot of people shout out d
 Should be last year i think. Those users claimed that ASUS site is cheating them as the site stated that vdimm supported is 2.4v if not mistaken. But in reality, the vdimm supported only 1.95v. Some people even said that this thing can be fixed by BIOS. But until now, u know la -pWs- |
|
|
Aug 31 2007, 08:36 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
alot had been covered in AM2 OC V1 thread.. thus dedicated topic no longer necessary...
this is among the first AM2 mobo in our market.. that time not many shifted to AM2.. and becoz of it's limitation in oc no further discussion can be done... currently alot of AM2 mobo flooded in our market and good in oc too... |
|
|
|
|
|
Sep 1 2007, 12:02 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
i think what TS achieved by using this mobo also quite ok. from 2.1ghz to 2.8ghz.significant diff in terms of performance there....
|
|
|
Sep 2 2007, 01:50 PM
|
Senior Member
986 posts Joined: Jul 2006 From: :: infront the steering ::
|
TS should change to other mobo....
|
|
|
Sep 3 2007, 12:42 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(rainingzero @ Aug 30 2007, 07:40 PM) maybe they are waiting for someone with a lot of stars to start with...joking2... lol so, how's ur progress on ocing ur proc?? now still doin 270x10.5 with 1.45v htt x 3 ram 1.95 timming default,,, i think my ddr667 is the blocker ar QUOTE(rainingzero @ Sep 1 2007, 12:02 PM) i think what TS achieved by using this mobo also quite ok. from 2.1ghz to 2.8ghz.significant diff in terms of performance there.... hoho i need more heheQUOTE(sempronic @ Sep 2 2007, 01:50 PM) TS should change to other mobo.... gud idea!  |
|
|
Sep 4 2007, 09:37 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
can't use 400 divider right?
last time more problem.. old bios cannot use 800.. another problem.. HP ram normally runs @ 2.2v.. it's good mobo with bad bios.. |
|
|
Sep 4 2007, 11:02 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(8tvt @ Sep 4 2007, 09:37 AM) can't use 400 divider right? Agreed. Good mobo with damn bad bios.last time more problem.. old bios cannot use 800.. another problem.. HP ram normally runs @ 2.2v.. it's good mobo with bad bios.. Last time i was so like the heatpipe design. Luckily did not go for this board.  -pWs- |
|
|
Sep 5 2007, 12:18 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
huhu damn need to wait for tweaked or new bios!
Added on September 6, 2007, 12:17 pmokay new beta bios.... share pros and cons k guys,, flashhingggg! http://support.asus.com/download/download....-us&model=M2N-E This post has been edited by Mr_47: Sep 6 2007, 12:17 PM |
|
|
Oct 31 2007, 03:46 PM
|
Junior Member
220 posts Joined: Feb 2005 From: Miri
|
I want to hear more hehehe so long no one didnt say anything here
And i wanna ask.... Is it ok to use the BETA BIOS? Is it safe to use? This post has been edited by garka: Oct 31 2007, 04:02 PM |
|
|
Oct 31 2007, 05:47 PM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
QUOTE(garka @ Oct 31 2007, 03:46 PM) I want to hear more hehehe so long no one didnt say anything here yes , i use latest beta bios now ! safeAnd i wanna ask.... Is it ok to use the BETA BIOS? Is it safe to use? but still lake of vdmim, 1.95 v ONLY  This post has been edited by likito: Oct 31 2007, 05:48 PM |
|
|
Oct 31 2007, 07:15 PM
|
|
Junior Member
220 posts Joined: Feb 2005 From: Miri
|
Alrite thanks for the infolikito...i know your upset but look on the bright side....you can get a new one next time hehe well its half bright side since you got to buy another one....
|
|
|
Oct 31 2007, 07:43 PM
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
QUOTE(likito @ Oct 31 2007, 05:47 PM) yes , i use latest beta bios now ! safe upgrade bios wont increase the vdimm~ but still lake of vdmim, 1.95 v ONLY last time me and 8tvt also using this board and suffer lot ~ coz lack of vdimm~ although board design i quite like it~ For me i will try vmod it if i still using it~~ hhaha coz really cant tahan the 1.95vdimm. |
|
|
Oct 31 2007, 08:49 PM
|
Senior Member
1,302 posts Joined: Oct 2006 From: Long Murum, Sarawak
|
sell it and get a new one
|
|
|
Oct 31 2007, 09:54 PM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
well , wait for AM2+ mobo , no plan to change now !!
|
|
|
Oct 31 2007, 10:27 PM
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
I've bought this board, but I'm in exam week till this Friday so I don't have time to use it. I'll give my opinion this Friday when I try it.
For anyone who wants to know what BIOS is good for this mobo, look around at Anandtech forums, there's a long thread about this mobo, what BIOS is stable, and what kind of problem with it |
|
|
Nov 1 2007, 12:56 AM
|
|
Senior Member
1,302 posts Joined: Oct 2006 From: Long Murum, Sarawak
|
rebels haven also have plenty information about this mobo bios
Added on November 1, 2007, 12:58 amrebels haven also have plenty information about this mobo bios This post has been edited by nik0ns: Nov 1 2007, 12:58 AM |
|
|
Nov 3 2007, 12:22 AM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
I've used the board for 3 hours now, nothing bad so far. It can overclock the same as Biostar TForce 550, to 2.4GHz 1.4V. Even I reinstalling Windows using overclocked state to test it's stability.
It's pretty stable to me, I've played F.E.A.R, with both the CPU and GPU fully overclocked, no crashing. I won't update the BIOS, since it run pretty stable to me, no reboot overclock failure, nothing that I heard happening to my mobo. I'm pretty happy right now |
|
|
Nov 3 2007, 12:43 AM
|
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
QUOTE(Najmods @ Nov 3 2007, 12:22 AM) I've used the board for 3 hours now, nothing bad so far. It can overclock the same as Biostar TForce 550, to 2.4GHz 1.4V. Even I reinstalling Windows using overclocked state to test it's stability. but when u wanan go further, vdimm will be ur limit~It's pretty stable to me, I've played F.E.A.R, with both the CPU and GPU fully overclocked, no crashing. I won't update the BIOS, since it run pretty stable to me, no reboot overclock failure, nothing that I heard happening to my mobo. I'm pretty happy right now |
|
|
Nov 3 2007, 01:19 AM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
QUOTE(tachlio @ Nov 3 2007, 12:43 AM) but when u wanan go further, vdimm will be ur limit~ My memory IS the limit, no matter how much volt I give to it it won't reach higher than 750MHz. I don't really care about VDimm to be honest |
|
|
Nov 3 2007, 02:30 AM
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong 
|
QUOTE(Najmods @ Nov 3 2007, 01:19 AM) My memory IS the limit, no matter how much volt I give to it it won't reach higher than 750MHz. I don't really care about VDimm to be honest after all it is still depends on the ram itself..no point getting the motherboard that comes with 3vdimm if we only using the normal value ram,which we cant expect much in its overclockability |
|
|
Nov 3 2007, 02:36 AM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
QUOTE(kalakatu @ Nov 3 2007, 02:30 AM) after all it is still depends on the ram itself..no point getting the motherboard that comes with 3vdimm if we only using the normal value ram,which we cant expect much in its overclockability I'm not aiming high RAM speeds with AM2, especially with integrated memory controller. As long as it fast enough for me to play some games it would be good enough. I don't want to break any records here, I'm done becoming hardcore overclocker |
|
|
Nov 3 2007, 07:17 AM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
i can stable 433mhz+- at vdmim : 1.95v
|
|
|
Nov 3 2007, 09:11 AM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
QUOTE(likito @ Nov 3 2007, 07:17 AM) i can stable 433mhz+- at vdmim : 1.95v Good for you then Anyway does CPU-Z reads your chipset as nForce 570 SLI? I've done some research and this mobo DOES use the SLI instead of Ultra. And what BIOS revision do you use? Mine is 1001 |
|
|
Nov 3 2007, 10:08 AM
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
u all uses value ram or high performance one???
sorry if noob question...recently interested in ocing |
|
|
Nov 3 2007, 10:11 AM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
QUOTE(jimmydotnet @ Nov 3 2007, 10:08 AM) u all uses value ram or high performance one??? I use Value RAM, why not? It's the chipset it uses that matters, even some value one have the same overclockability as the high performance one. You just need to know which onesorry if noob question...recently interested in ocing This post has been edited by Najmods: Nov 3 2007, 10:12 AM |
|
|
Nov 3 2007, 01:41 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
for me, OCing with normal value ram is much exciting, since we need to play with timing and latency a lot
 |
|
|
Nov 3 2007, 03:11 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
im using kingston hynix chipset...anyone tried it??
by the way...how to optimize the timing and the latency of the value ram... is there any basic calculation to do this? |
|
|
Nov 4 2007, 12:37 PM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
QUOTE(jimmydotnet @ Nov 3 2007, 03:11 PM) im using kingston hynix chipset...anyone tried it?? the basic has been post on other thread , AM2 thread , go there look around ! by the way...how to optimize the timing and the latency of the value ram... is there any basic calculation to do this? wat u want to know , may be i can guide simple way ! not so PRO hynix not bad at all , can achieve high ram freq , just need to loose the timing and high vdmim |
|
|
Nov 5 2007, 08:41 PM
|
Senior Member
2,851 posts Joined: Jun 2006
|
Ah the good old M2N-E, used to have one. It is stable, cool, and works well as a medium O/C board. I sold it cos of the RAM voltage limited at 1.95V, and I was on Mushkins. Other than that I think you'd enjoy o/c it with valueram, its not extreme but it does well with the heatpipes...
|
|
|
Nov 15 2007, 07:07 PM
|
Senior Member
732 posts Joined: Apr 2005 From: Tanah Melayu
|
my fren gt an Asus M2N-E SLI be4.. he say ther hav oc limitation too same as M2N-E.. conclusion is M2n-E is a gud or a bad board?
|
|
|
Nov 16 2007, 10:58 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
good board but not in oc..
if no oc better take cheaper board.. |
|
|
Nov 18 2007, 02:19 PM
|
Senior Member
2,751 posts Joined: Jan 2003 From: Taiping
|
i m using amd athlon x2 am2 3800+ windsor f2, asus m2n-e, 1gb corsair ddr2 667 vs ram, palit 7900gs 236mb ddr3..can anyone teach me to overclock mine please?
|
|
|
Nov 22 2007, 03:36 AM
|
Senior Member
1,083 posts Joined: Sep 2004
|
I owned an Abit AN9 32X and the max Vdimm is 2.3 to 2.4V.
I Vmd it to 2.7V max and able to OC my AM2 3800 F3 to 3.7GHz, DDR2 >1200Mhz. Maybe someone should try Vmod on it |
|
|
Nov 28 2007, 10:20 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
any vmod link?.....
|
|
|
Nov 30 2007, 02:11 PM
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
if X2 3800+ can only can be pushed to 2.45Ghz max, what if i use X2 4000+? how much can it goes?
|
|
|
Nov 30 2007, 05:09 PM
|
Senior Member
683 posts Joined: Jun 2006 From: serdang/selangor
|
QUOTE(onslought @ Nov 30 2007, 02:11 PM) if X2 3800+ can only can be pushed to 2.45Ghz max, what if i use X2 4000+? how much can it goes? dude, do u mean if it still using on the same board..the different between 3800+ and 4000+ is the multiplier.. better u change the mobo instead of changing the heart.. even 3800+ can be pushed more if u had better mobo and oc ram.. edited.. forgot to mentions..but if u got a good batch of proc, M2N-E can do more oso.. This post has been edited by mr_habuk: Nov 30 2007, 05:17 PM |
|
|
Nov 30 2007, 05:40 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
this mobo is lousy IMHO...
 however, still using it untill now.lazy to change other mobo.. anyway, i do some tweaking and testing, my 3800+ F2 can oced to 2800mhz with limited Vdimm, i manage to get rams which not a Vdimm hunger... still a good ocing result for F2 + M2N-E IMHO...  This post has been edited by rainingzero: Nov 30 2007, 05:44 PM |
|
|
Nov 30 2007, 07:39 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
thanks bro..
i tot so.. but i just bought this mobo for about 4 months.. wait until a few more months to change with a new mobo.. |
|
|
Dec 1 2007, 01:17 AM
|
Senior Member
2,546 posts Joined: Jan 2005 From: far far away...
|
haha change mobo the best option rite?
im going for dk p35 hope canhave it by january |
|
|
Dec 1 2007, 01:50 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
wat is the best cheap mobo suitable for oc amd X2?
|
|
|
Dec 1 2007, 02:38 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(nelienuxe_sara @ Dec 1 2007, 01:17 AM) haha change mobo the best option rite? DK P35?? thats intel mobo.. im going for dk p35 hope canhave it by january not related to AMD la...better said change to new platform...QUOTE(onslought @ Dec 1 2007, 01:50 AM) wat is the best cheap mobo suitable for oc amd X2? i think biostar mobo quite good ocing features..maybe u can try Tforce 560 A2+... |
|
|
Dec 1 2007, 03:10 PM
|
|
Senior Member
683 posts Joined: Jun 2006 From: serdang/selangor
|
QUOTE(onslought @ Dec 1 2007, 01:50 AM) wat is the best cheap mobo suitable for oc amd X2? dude, save some more..u might get addicted after this..  |
|
|
Dec 2 2007, 02:59 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(mr_habuk @ Dec 1 2007, 03:10 PM) dude, save some more..u might get addicted after this.. what do u mean by dat?  |
|
|
Dec 2 2007, 10:33 AM
|
|
Senior Member
683 posts Joined: Jun 2006 From: serdang/selangor
|
join AMD AM2 thread, u may understand what i meant..
|
|
|
Dec 2 2007, 10:34 AM
|
Senior Member
1,406 posts Joined: Jun 2007
|
haha...thats right..addicted...im one of the victim
|
|
|
Dec 2 2007, 02:39 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
LOL
i'll join |
|
|
Dec 4 2007, 09:01 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(onslought @ Dec 2 2007, 02:59 AM) what do u mean by dat? QUOTE(mr_habuk @ Dec 2 2007, 10:33 AM) join AMD AM2 thread, u may understand what i meant.. huhu its all bout from 2 gig maxout to 3 gig ++ huhu  |
|
|
Dec 4 2007, 09:17 PM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
QUOTE(Mr_47 @ Dec 4 2007, 09:01 PM) huhu its all bout from 2 gig maxout to 3 gig ++ huhu yup..ive only manage to get 2.909ghz...it makes u addicted!n of course, keringkan ur pocket.  |
|
|
Dec 5 2007, 02:13 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
2.8 here still tryin gotta get some stuff from pc fair huhu
gtg |
|
|
Dec 5 2007, 09:18 AM
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
errr...mind if i join?
 hye everyone....i just bought this board...and iam just back to amd since i use intel almost 2 years...last time amd 64 s9s9 got FSB:DDR ratio....this time i notice didnt have @ either i dunno .....iam using AMD X2 4000 pair up with OCZ 1GBx2 800mhz 5-5-5-15 Vista Upgrade RAM module....the only option is...i only can set the limitation of the ram from 533 till 1066...when i increase the FSB to 240mhz, only the proc been oced but the ram still at stock speed...huhuhu can some shifu...otai...orang lama...oc guru....errr what else arrr....heheh tell me what iam missing past few years ...thx guys |
|
|
Dec 5 2007, 10:19 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
how come?? suppose the rams oced together with the proc.
what divider did u use?? do u set the ram speed to 667??or at stock speed 800mhz?? |
|
|
Dec 5 2007, 11:19 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 5 2007, 10:19 AM) how come?? suppose the rams oced together with the proc. yah supposed to be...but i oced fsb till 240 the proc only oced but the ram still 800mhz....i've been serching the ram divider but dun have...some1 plsss help me what divider did u use?? do u set the ram speed to 667??or at stock speed 800mhz?? |
|
|
Dec 5 2007, 11:25 AM
|
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
QUOTE(fatalynx05 @ Dec 5 2007, 11:19 AM) yah supposed to be...but i oced fsb till 240 the proc only oced but the ram still 800mhz....i've been serching the ram divider but dun have...some1 plsss help me post the CPUZ and memset SS here~ |
|
|
Dec 5 2007, 11:30 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(tachlio @ Dec 5 2007, 11:25 AM) post the CPUZ and memset SS here~ ermmm...ok... but how u guys set the ddr divider?? i find in the bios not found... |
|
|
Dec 5 2007, 12:43 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
yup no ram divider in m2ne weh'
|
|
|
Dec 5 2007, 03:47 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
 here the things...i set the fsb to 220.....HTT 5x...and the DDR to 1066 5-5-5-15 1.9v....the cpu-z show like above...iam using latest cpu-z and 1202 bios actually what the status of this board? beta? prototype? huhuhu lack of features and v tweakThis post has been edited by fatalynx05: Dec 5 2007, 03:47 PM |
|
|
Dec 6 2007, 12:29 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
@fatalynx05
i use same proc & ram as u r using rite now, but i can oc it till 2.5Ghz using x10 multiplier..i increase the vCore to 1.2 & vDimm to 1.9.. i think u can try it.. or anyone can suggest me a better value to oc it higher? This post has been edited by onslought: Dec 6 2007, 12:31 PM |
|
|
Dec 6 2007, 01:27 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(onslought @ Dec 6 2007, 12:29 PM) @fatalynx05 my default vcore stated in bios is 1.3 i also forgot i use same proc & ram as u r using rite now, but i can oc it till 2.5Ghz using x10 multiplier..i increase the vCore to 1.2 & vDimm to 1.9.. i think u can try it.. or anyone can suggest me a better value to oc it higher? u also using OCZ vista upgrade? what is ur speed and timings now? |
|
|
Dec 6 2007, 02:03 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
im not using OCZ vista upgrade..im at work right now, later tonight i post my cpu-z pic..
Added on December 6, 2007, 5:57 pmhere are some add on   This post has been edited by onslought: Dec 6 2007, 05:57 PM |
|
|
Dec 7 2007, 06:52 AM
|
|
Senior Member
2,991 posts Joined: Jun 2007 From: Johor
|
Success clock my 3800 F3 @ 3.0Ghz on Asus M2N-E
|
|
|
Dec 7 2007, 10:42 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(Liuteva @ Dec 7 2007, 06:52 AM) Success clock my 3800 F3 @ 3.0Ghz on Asus M2N-E congratss!!
do u have any idea to oc my 4000 brisbane higher? |
|
|
Dec 7 2007, 11:11 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 5 2007, 03:47 PM) here the things...i set the fsb to 220.....HTT 5x...and the DDR to 1066 5-5-5-15 1.9v....the cpu-z show like above...iam using latest cpu-z and 1202 bios actually what the status of this board? beta? prototype? huhuhu lack of features and v tweak QUOTE(Liuteva @ Dec 7 2007, 06:52 AM) Success clock my 3800 F3 @ 3.0Ghz on Asus M2N-E Congrats...
can get higher than that?? coz i doubt this mobo manage to get higher result stable with F3 proc ((3.2-3.7ghz), thats y i pass on getting the F3 last time...and no money too at that time... edit: @onslought u may change the cpu divider by lowering ur rams to 533, then try to push ur cpu freq more...i think ur brisbane can get 3.0ghz. coz from ur CPU-Z, seems u got quite good rams. 833.9mhz at 1.95v Vdimm is good u know... This post has been edited by rainingzero: Dec 7 2007, 11:22 AM |
|
|
Dec 7 2007, 11:30 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(rainingzero @ Dec 7 2007, 11:11 AM) edit: i use kingston hypnix ram..@onslought u may change the cpu divider by lowering ur rams to 533, then try to push ur cpu freq more...i think ur brisbane can get 3.0ghz. coz from ur CPU-Z, seems u got quite good rams. 833.9mhz at 1.95v Vdimm is good u know... later tonight i try oc it again..thanks bro.. |
|
|
Dec 7 2007, 11:32 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(onslought @ Dec 7 2007, 11:30 AM) i use kingston hypnix ram.. hynix?? what chips used?? coz last time using hynix Fp-y5, only manage to oc till 750++ at 1.95Vdimm... later tonight i try oc it again..thanks bro.. |
|
|
Dec 7 2007, 11:58 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
im not sure..how to check?
|
|
|
Dec 7 2007, 11:59 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(onslought @ Dec 7 2007, 11:58 AM) im not sure..how to check? take our ur rams and check at the chips....usually printed at the chips... |
|
|
Dec 7 2007, 12:00 PM
|
Senior Member
1,269 posts Joined: Dec 2007 From: MoD ParaDisE 
|
lol... m2n-e.. my name.. ahaha.. lolz.. jk.. it is my nick after proud using untill..... dunno what happen.. cannot turn on cpu.. now change to m2n-DH.. successfully clock my AMD x2 +4000 2.0ghz to 3.8ghz with stock fan and psu.. lol.. maybe thats y my mobo died..
|
|
|
Dec 7 2007, 12:38 PM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
QUOTE(m2n-e @ Dec 7 2007, 12:00 PM) lol... m2n-e.. my name.. ahaha.. lolz.. jk.. it is my nick after proud using untill..... dunno what happen.. cannot turn on cpu.. now change to m2n-DH.. successfully clock my AMD x2 +4000 2.0ghz to 3.8ghz with stock fan and psu.. lol.. maybe thats y my mobo died.. r u sure 4000 overclock to 3.8 ghz ? |
|
|
Dec 7 2007, 12:39 PM
|
|
Senior Member
1,269 posts Joined: Dec 2007 From: MoD ParaDisE
|
yessir.. and my mobo dead bye bye.. change to m2n-DH
 ouh ya, the heat aa.. around 80-99 degree.. lolz..This post has been edited by m2n-e: Dec 7 2007, 12:40 PM |
|
|
Dec 7 2007, 07:38 PM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
r u serious bro?can achieve 3.8?thats unbelievable
..mine to achieve 2.9 with stock hsf also very hard..temp too high..what is ur vcore at that time?mine need 1.5 to stable at 2.9 This post has been edited by alive88: Dec 7 2007, 07:41 PM |
|
|
Dec 7 2007, 08:23 PM
|
|
Senior Member
1,269 posts Joined: Dec 2007 From: MoD ParaDisE
|
vCore aa if i remember its 2.0 if i remember, got use overclock software to achieve that.. but dont know where my fren get it.. he wont tell me again
 |
|
|
Dec 8 2007, 02:56 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
yeahh..this is my final stable oc..haha..
 |
|
|
Dec 8 2007, 04:19 AM
|
|
Senior Member
1,269 posts Joined: Dec 2007 From: MoD ParaDisE
|
nice, 2.7ghz
|
|
|
Dec 8 2007, 08:03 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 7 2007, 11:11 AM) dont blame the board, i think the features quite ok for newbies in ocing. others can get higher result with this mobo, y not u?? huhu yaloh my skill is low grade 1 Congrats... can get higher than that?? coz i doubt this mobo manage to get higher result stable with F3 proc ((3.2-3.7ghz), thats y i pass on getting the F3 last time...and no money too at that time... edit: @onslought u may change the cpu divider by lowering ur rams to 533, then try to push ur cpu freq more...i think ur brisbane can get 3.0ghz. coz from ur CPU-Z, seems u got quite good rams. 833.9mhz at 1.95v Vdimm is good u know... ....but i currently success oc to 2.9ghz with 1.33 vcore with 840 5-5-5-15 2t setting...currently csn run pi test and some benchmark and can play games....later i post the cpu-z snapshot my house dun have internet |
|
|
Dec 8 2007, 09:26 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 8 2007, 08:03 AM) huhu yaloh my skill is low grade 1 good2...fast2 post some SS here..mine i think already maxed. but dunno la later.coz last time only managed to oc untill 2.7ghz and now 2.8ghz. who know later can get 3.0ghz... ....but i currently success oc to 2.9ghz with 1.33 vcore with 840 5-5-5-15 2t setting...currently csn run pi test and some benchmark and can play games....later i post the cpu-z snapshot my house dun have internet  or maybe dead terus....  i think my F2 getting 2.8ghz already ok la...time to switch to darkside of intel... edit: u are using cpu/6 divider right?? rams set to 667mhz?? ur proc got potential to be pushed more. try set ur rams to 533 then push ur procs more... maybe u can achieve 3.0-3.2ghz like that.if Bsod appear, try to add more Vcore.. edit2: @onslought ur Vcore u set to what?? try add more vcore and push more. This post has been edited by rainingzero: Dec 8 2007, 09:33 AM |
|
|
Dec 8 2007, 01:33 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 8 2007, 09:26 AM) good2...fast2 post some SS here..mine i think already maxed. but dunno la later.coz last time only managed to oc untill 2.7ghz and now 2.8ghz. who know later can get 3.0ghz... sure later i'll try...i just installed cooler master gemin2 with 2X12cm fan...hahah look so packed if lizard stuck in sure cannot go out...hahahah or maybe dead terus.... i think my F2 getting 2.8ghz already ok la...time to switch to darkside of intel... edit: u are using cpu/6 divider right?? rams set to 667mhz?? ur proc got potential to be pushed more. try set ur rams to 533 then push ur procs more... maybe u can achieve 3.0-3.2ghz like that.if Bsod appear, try to add more Vcore.. edit2: @onslought ur Vcore u set to what?? try add more vcore and push more. |
|
|
Dec 8 2007, 02:17 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(rainingzero @ Dec 8 2007, 09:26 AM) edit2: @onslought my vcore on bios i set to 1.25v..ur Vcore u set to what?? try add more vcore and push more. i try 2.8Ghz but until 21st loop on pi calculation, it BSOD..it happen 3 times..LOL This post has been edited by onslought: Dec 8 2007, 02:19 PM |
|
|
Dec 8 2007, 02:50 PM
|
|
Senior Member
683 posts Joined: Jun 2006 From: serdang/selangor
|
QUOTE(onslought @ Dec 8 2007, 02:17 PM) my vcore on bios i set to 1.25v.. feed summore larr.. i try 2.8Ghz but until 21st loop on pi calculation, it BSOD..it happen 3 times..LOL |
|
|
Dec 8 2007, 02:50 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(onslought @ Dec 8 2007, 02:17 PM) my vcore on bios i set to 1.25v.. pump more Vcore...add to 1.4v, then try to increase untill 3.0ghz...i try 2.8Ghz but until 21st loop on pi calculation, it BSOD..it happen 3 times..LOL |
|
|
Dec 8 2007, 06:23 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
will update my spec soon
|
|
|
Dec 8 2007, 09:04 PM
|
|
Senior Member
1,269 posts Joined: Dec 2007 From: MoD ParaDisE
|
better feed and not ended up like my mobo
|
|
|
Dec 9 2007, 12:15 AM
|
Senior Member
4,057 posts Joined: Jan 2003 From: Pandan Indah
|
this motherboard will phased out soon and replaced with Asus M2N-E Plus regarding my supplier.
|
|
|
Dec 9 2007, 12:21 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(zhen^wei @ Dec 9 2007, 12:15 AM) this motherboard will phased out soon and replaced with Asus M2N-E Plus regarding my supplier. M2N-E plus support AM2+ procs?? |
|
|
Dec 9 2007, 12:43 AM
|
Junior Member
277 posts Joined: Jan 2006 
|
i think our m2n-e sapport am2+ lor...
it is said to sapport am2+ with their upcoming bios.. |
|
|
Dec 9 2007, 12:47 AM
|
|
Senior Member
4,057 posts Joined: Jan 2003 From: Pandan Indah
|
QUOTE(rainingzero @ Dec 9 2007, 12:21 AM) M2N-E plus support AM2+ procs?? yes. M2N-E Plus support AM2+ |
|
|
Dec 9 2007, 01:27 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(kurasano @ Dec 9 2007, 12:43 AM) i think our m2n-e sapport am2+ lor... yeah, support Am2+ proc with updated bios but with some features disable...it is said to sapport am2+ with their upcoming bios.. QUOTE(zhen^wei @ Dec 9 2007, 12:47 AM) yes. M2N-E Plus support AM2+ do u have the link for this mobo??wanna know the spec also,hpe they do enhanced the ocing features... |
|
|
Dec 9 2007, 01:58 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
when this m2n-e plus will coming out? have d news somewhere already?
|
|
|
Dec 9 2007, 12:37 PM
|
|
Senior Member
4,057 posts Joined: Jan 2003 From: Pandan Indah
|
QUOTE(rainingzero @ Dec 9 2007, 01:27 AM) yeah, support Am2+ proc with updated bios but with some features disable... go http://www.asus.com/index.aspx and search it..do u have the link for this mobo??wanna know the spec also,hpe they do enhanced the ocing features... hard to enteer asus website.. QUOTE(onslought @ Dec 9 2007, 01:58 AM) when this m2n-e plus will coming out? have d news somewhere already? next week lor. 18-19 disember. cas i had preorder 20units for the cybercafe from sarawak.if want. let me know, i need check see got extra or not. |
|
|
Dec 9 2007, 09:28 PM
|
|
Senior Member
1,468 posts Joined: Sep 2006 From: Taman Melati, KL
|
@zhen-wei , sarawak which part ? :hehe
|
|
|
Dec 10 2007, 08:21 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
 1m Pi test  32m pi test this is stable setting for me...rendering video 4 hours and 40 min stable ....the highest temp only 48c using gemin2 12cmX2 fan (cheap2 fan) |
|
|
Dec 11 2007, 02:55 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
nice..2.9Ghz..congrats!!
|
|
|
Dec 11 2007, 01:25 PM
|
|
Junior Member
277 posts Joined: Jan 2006
|
why my FSB cannot go higher than 250....
grrrr...tension |
|
|
Dec 11 2007, 06:59 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(kurasano @ Dec 11 2007, 01:25 PM) why my FSB cannot go higher than 250.... what is ur Vdimm?? Vcore??ur HT multiplier??what cpu/ram divider used??grrrr...tension |
|
|
Dec 12 2007, 07:28 AM
|
|
Junior Member
277 posts Joined: Jan 2006
|
QUOTE(rainingzero @ Dec 11 2007, 06:59 PM) what is ur Vdimm?? Vcore??ur HT multiplier??what cpu/ram divider used?? 1.55v ht multiplier 3x ram at 400mhz....my max is 248 x 11 = 2728mhz |
|
|
Dec 12 2007, 07:55 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(kurasano @ Dec 12 2007, 07:28 AM) 1.55v ht multiplier 3x ram at 400mhz.... maybe ur ocing limited by ur rams...what rams u used??my max is 248 x 11 = 2728mhz |
|
|
Dec 12 2007, 08:02 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(kurasano @ Dec 12 2007, 07:28 AM) 1.55v ht multiplier 3x ram at 400mhz.... the ram timing not suitable? my max is 248 x 11 = 2728mhz huhuhu just try my luck...bydaway iam been waitting for the asus bios from the site...still dont have the improve version of v mod setting ..looks like we stuck at 1.95v barrier  |
|
|
Dec 12 2007, 10:32 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 12 2007, 08:02 AM) the ram timing not suitable? this already dicussed earlier...if wanna increase ur Vdimm capab, then have to hardmod it... huhuhu just try my luck...bydaway iam been waitting for the asus bios from the site...still dont have the improve version of v mod setting ..looks like we stuck at 1.95v barrier |
|
|
Dec 13 2007, 04:12 PM
|
|
Junior Member
277 posts Joined: Jan 2006
|
hm...may be my ram..use value ram..huhu kingston...
hm...guys...sorry for asking...u all hav issue with sound driver for vista? what is the best solution thoug..?? |
|
|
Dec 13 2007, 04:42 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 12 2007, 10:32 AM) this already dicussed earlier...if wanna increase ur Vdimm capab, then have to hardmod it... bro u try already? huhu iam not dare to do....heheh |
|
|
Dec 13 2007, 06:15 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
AT LAST!! my final oc..
but cant reach 3.0  |
|
|
Dec 13 2007, 07:41 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 13 2007, 04:42 PM) bro u try already? huhu iam not dare to do....heheh me?? never ever thought of doing it too...later kaboomm~!!!!QUOTE(onslought @ Dec 13 2007, 06:15 PM) AT LAST!! my final oc.. 2.9ghz quite good already. not all 3600++ brisbane or 4000+ capable of hit 3.0ghz...its just the matter of luck..but cant reach 3.0 |
|
|
Dec 13 2007, 10:17 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
yaloh...mine also cannot hit 3ghz barrier.....yesterday nite i tried push fsb above 300 cannot pass
i already drop cpu&ddr multiply...the highest fsb i can reach is 290..and 533 ddr divider is not stable for me...is it becoz of the bios version? iam using the latest 1 (1202) |
|
|
Dec 13 2007, 11:04 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 13 2007, 10:17 PM) yaloh...mine also cannot hit 3ghz barrier.....yesterday nite i tried push fsb above 300 cannot pass maybe its just ur rams.... i already drop cpu&ddr multiply...the highest fsb i can reach is 290..and 533 ddr divider is not stable for me...is it becoz of the bios version? iam using the latest 1 (1202) try to use diff slot of rams. if u use 2 x 1gb, put the rams to the nearest slot from the proc.. |
|
|
Dec 14 2007, 02:05 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
me 2, cant go any more than 2.92Ghz..
or mayb the ram cant go futher.. but wats the diffrent to put the ram in nearest slot? |
|
|
Dec 14 2007, 08:23 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(onslought @ Dec 14 2007, 02:05 AM) me 2, cant go any more than 2.92Ghz.. putting the rams to the nearest slot will make the rams voltage controller much more easier to pump up power to the ram itself.try one by one, then put the weeker rams nearest to the proc...it will help the weaker rams to catch up with the other one...or mayb the ram cant go futher.. but wats the diffrent to put the ram in nearest slot? |
|
|
Dec 14 2007, 06:59 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
wow..
i didnt know dat  thanks for the info.. |
|
|
Dec 15 2007, 08:33 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 13 2007, 11:04 PM) maybe its just ur rams.... wah!! like that can also arr?? try to use diff slot of rams. if u use 2 x 1gb, put the rams to the nearest slot from the proc.. later i try |
|
|
Dec 15 2007, 09:39 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(fatalynx05 @ Dec 15 2007, 08:33 PM) wah!! like that can also arr?? dont put all at the nearest slot arr. later u come blame me why my rams not running in dual channel mode?? later i tryrefer to ur mobo manual ok?? |
|
|
Dec 17 2007, 01:02 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rainingzero @ Dec 15 2007, 09:39 PM) dont put all at the nearest slot arr. later u come blame me why my rams not running in dual channel mode?? same lah...huhu maybe my ram lousy 1 hehehe....refer to ur mobo manual ok?? |
|
|
Dec 24 2007, 01:39 AM
|
Senior Member
1,417 posts Joined: Jan 2003 From: MMU
|
Holla guys. There's a pre-set OCing /Noob OCing feature in M2N-E. N currently i set it to 10% OC,so my 4000+ is running @ 2.3
My question is,how much can i push my 4000+ without changing my HSF? Wut is the max tempt. limit can my 4000+ stand? |
|
|
Dec 25 2007, 08:36 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(black^demon @ Dec 24 2007, 01:39 AM) Holla guys. There's a pre-set OCing /Noob OCing feature in M2N-E. N currently i set it to 10% OC,so my 4000+ is running @ 2.3 u may try to set the option to manual and try to push untill 2.5-2.7Ghz. IMHO, suppose no need to pump up too high Vcore for brisbane, hence no need the 3rd party cooler.My question is,how much can i push my 4000+ without changing my HSF? Wut is the max tempt. limit can my 4000+ stand? its actually depends on how much ur Vcore actually. higher Vcore will tends to increase ur procs temp. however, brisbane operates in much more cooler compared to windsor. so, no need to worry much if ur vcore not too high... |
|
|
Dec 25 2007, 07:37 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Yes...as bro rainingzero said, overclock manually is the best.
I dun think you want to run certain overclock speed w some extra Vcore added while any lower Vcore than that is enough to stabilize for that particular speed. -pWs- |
|
|
Dec 26 2007, 02:44 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
this mobo have problems with corsair ram..failed to start the pc...i changed it to kingston ram...still no problem occur
|
|
|
Dec 26 2007, 11:39 PM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(jimmydotnet @ Dec 26 2007, 02:44 PM) this mobo have problems with corsair ram..failed to start the pc...i changed it to kingston ram...still no problem occur mayb that crossair ram u bought is corrupted..Added on December 26, 2007, 11:44 pm QUOTE(black^demon @ Dec 24 2007, 01:39 AM) Holla guys. There's a pre-set OCing /Noob OCing feature in M2N-E. N currently i set it to 10% OC,so my 4000+ is running @ 2.3 with manual oc, u can hit till 3.0Ghz or higher..My question is,how much can i push my 4000+ without changing my HSF? Wut is the max tempt. limit can my 4000+ stand? try lower the multiplier & vdimm and try increase vcore.. This post has been edited by onslought: Dec 26 2007, 11:44 PM |
|
|
Dec 27 2007, 11:38 AM
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(jimmydotnet @ Dec 26 2007, 02:44 PM) this mobo have problems with corsair ram..failed to start the pc...i changed it to kingston ram...still no problem occur dah tukar ram ke bang |
|
|
Dec 27 2007, 04:58 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
ram dah tukar...the corsair ram put it into gigabyte p35 ds3...perform okay....
|
|
|
Dec 28 2007, 08:20 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
erm..maybe got issue for that rams. i tried KVR and micron B4, so fargot no issue...
anyone use freezer 64 pro?? i found out its really hard to mount this cooler at AM2 platform... |
|
|
Dec 30 2007, 03:14 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
anyone can recommend good bios to oc for this mobo? currently i'm use 1001 beta. 0800 got problem with my dvdrw sata drive
|
|
|
Dec 31 2007, 02:50 AM
|
|
Junior Member
93 posts Joined: Jun 2006 From: Kuala Lumpur
|
QUOTE(Ciku @ Dec 30 2007, 03:14 PM) anyone can recommend good bios to oc for this mobo? currently i'm use 1001 beta. 0800 got problem with my dvdrw sata drive just update the latest version of bios |
|
|
Jan 2 2008, 11:49 AM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(Ciku @ Dec 30 2007, 03:14 PM) anyone can recommend good bios to oc for this mobo? currently i'm use 1001 beta. 0800 got problem with my dvdrw sata drive http://support.asus.com/download/download....SLanguage=en-us  |
|
|
Jan 2 2008, 12:09 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
Succesful oc 3800 f3 with my asus m2n-e  |
|
|
Jan 2 2008, 12:27 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
cekap gile du....
 |
|
|
Jan 2 2008, 12:43 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(jimmydotnet @ Jan 2 2008, 12:27 PM) cekap gile du.... try laa oc kat 6000+ lak . Takkan nak tgk jea |
|
|
Jan 2 2008, 01:31 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
@Ciku
Go somemore. F3 3800 3GHz only starting point. If limited by Vdimm, drop Ram Divider and oc more -pWs- |
|
|
Jan 2 2008, 01:53 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 2 2008, 01:31 PM) @Ciku starting point? Go somemore. F3 3800 3GHz only starting point. If limited by Vdimm, drop Ram Divider and oc more -pWs-  hard to get 'final' point with m2n-e..   I try drop ram divider to 10 but system fail to boot. Actually I'm use pair of kingston value ram, but different chips. One of them use hynix and others one not sure what chip (only can see some code at the chip but not brand). Hynix chip only can pass 2.65Ghz and others one can reach 3Gz ( that why u can see in cpuz above I'm only use single ram). And now not sure my oc result is limit by ram or mobo.. Maybe both of them |
|
|
Jan 2 2008, 01:55 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(Ciku @ Jan 2 2008, 01:53 PM) starting point? If using the ram which can reach 3GHz, clock speed can go somemore??? hard to get 'final' point with m2n-e.. I try drop ram divider to 10 but system fail to boot. Actually I'm use pair of kingston value ram, but different chips. One of them use hynix and others one not sure what chip (only can see some code at the chip but not brand). Hynix chip only can pass 2.65Ghz and others one can reach 3Gz ( that why u can see in cpuz above I'm only use single ram). And now not sure my oc result is limit by ram or mobo.. Maybe both of them-pWs- |
|
|
Jan 2 2008, 02:04 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 2 2008, 01:55 PM) If using the ram which can reach 3GHz, clock speed can go somemore??? only can reach fsb 301- 304 Mhz like that.. After that super PI test fail-pWs- |
|
|
Jan 2 2008, 02:06 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(Ciku @ Jan 2 2008, 02:04 PM) only can reach fsb 301- 304 Mhz like that.. After that super PI test fail Attach screenies of CPU-z [CPU & MEM] and Memset here -pWs- |
|
|
Jan 2 2008, 02:28 PM
|
Senior Member
1,404 posts Joined: Apr 2006 From: ......
|
hehe, come here to visit bro ciku,
ape khabar ciku? ape sal tu vcore baru 1.15v? suppose to be 1.21v for your F3 at stock vcore la i think your mobo has voltage drop problem try to increase a bit vcore and see... fill it up to 1.21v like that |
|
|
Jan 2 2008, 02:30 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 2 2008, 02:06 PM) Attach screenies of CPU-z [CPU & MEM] and Memset here memset will be upload later-pWs- |
|
|
Jan 2 2008, 11:49 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
im currently using x2 6000+ on windsor...is it possible to overclock it as the frequency is already high...on ur exp...what the highest freq does x2 6000+ achieved??...im nubie to oc...
|
|
|
Jan 3 2008, 12:09 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jimmydotnet @ Jan 2 2008, 11:49 PM) im currently using x2 6000+ on windsor...is it possible to overclock it as the frequency is already high...on ur exp...what the highest freq does x2 6000+ achieved??...im nubie to oc... Yes. It is possible to overclock more. By how much? Dunno. You have to try out yourself -pWs- |
|
|
Jan 3 2008, 12:17 PM
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
bro jimmy want to oc also ka like bro ciku??
go try oc with ur proc,then help me oc mine plak laa |
|
|
Jan 3 2008, 03:12 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(nitros06 @ Jan 3 2008, 12:17 PM) bro jimmy want to oc also ka like bro ciku?? ko pn nak jugak.. go try oc with ur proc,then help me oc mine plak laa Quad ke? |
|
|
Jan 3 2008, 05:19 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(nitros06 @ Jan 3 2008, 12:17 PM) bro jimmy want to oc also ka like bro ciku?? go try oc with ur proc,then help me oc mine plak laa QUOTE(Ciku @ Jan 3 2008, 03:12 PM) ko pn nak jugak.. oi newbies... lol la korang nie... Quad ke?btw...i ask this brother ciku...he is currently my oc mentor ..he said that the 6000+ cannot go high on m2n-e...plus the HT link barrier cannot exceed the 1000..so it must be difficult to do the oc math...sory..nubie again |
|
|
Jan 3 2008, 05:24 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jimmydotnet @ Jan 3 2008, 05:19 PM) oi newbies... lol la korang nie... Can exceed 1000 but it is not recommended. btw...i ask this brother ciku...he is currently my oc mentor ..he said that the 6000+ cannot go high on m2n-e...plus the HT link barrier cannot exceed the 1000..so it must be difficult to do the oc math...sory..nubie again Btw, what the max Vcore for m2n-E?? -pWs- |
|
|
Jan 4 2008, 09:07 PM
|
|
Senior Member
2,751 posts Joined: Jan 2003 From: Taiping
|
used this board b4..oced my 3800 x2 f2 stepping to 2500..cannot go far..mayb vdimm limit or wat..i wouldnt noe
|
|
|
 Jan 5 2008, 07:33 PM
|
|
Newbie
3 posts Joined: Jan 2008
|
QUOTE(-pWs- @ Dec 25 2007, 07:37 PM) Yes...as bro rainingzero said, overclock manually is the best. i can see that you guys talk about OC but actually i dunno how to OC my PC....and my PC is quite hot though any solution ?I dun think you want to run certain overclock speed w some extra Vcore added while any lower Vcore than that is enough to stabilize for that particular speed. -pWs- |
|
|
Jan 5 2008, 10:11 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 3 2008, 05:24 PM) Can exceed 1000 but it is not recommended. Vcore for this board can up to 1.5+V or 1.55V like that.. I dont remember this. I think Vcore is not the problem for this mobo but Vdimm give some problem. Max Vdimm only can set to 1.95V in bios. But now we can see high performance ram go to 2.0-2.2V. Better to look for good ram if want to get highest oc result with this moboBtw, what the max Vcore for m2n-E?? -pWs- |
|
|
Jan 6 2008, 02:42 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(amirto2003 @ Jan 5 2008, 07:33 PM) i can see that you guys talk about OC but actually i dunno how to OC my PC....and my PC is quite hot though any solution ? 1. Make sure your air circulation is good.2. Change cooling if necessary QUOTE(Ciku @ Jan 5 2008, 10:11 PM) Vcore for this board can up to 1.5+V or 1.55V like that.. I dont remember this. I think Vcore is not the problem for this mobo but Vdimm give some problem. Max Vdimm only can set to 1.95V in bios. But now we can see high performance ram go to 2.0-2.2V. Better to look for good ram if want to get highest oc result with this mobo I would recommend you to change board -pWs- |
|
|
Jan 6 2008, 08:49 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 6 2008, 02:42 AM) I would recommend you to change board recommend but I love black pcb and heatpipe of this board -pWs-  |
|
|
Jan 6 2008, 08:56 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(Ciku @ Jan 6 2008, 08:49 AM) recommend but I love black pcb and heatpipe of this board Haha...Like that no choice already The last you can do is lower down the divider and overclock -pWs- |
|
|
Jan 6 2008, 09:50 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(-pWs- @ Jan 6 2008, 08:56 AM) Haha...Like that no choice already I cannot see others choice..hehe.. The last you can do is lower down the divider and overclock -pWs- yes,only can low divider. can give recommend ram for oc with low Vdimm (max 1.95V Vdimm with this board) ?? |
|
|
Jan 6 2008, 09:57 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(Ciku @ Jan 6 2008, 09:50 AM) I cannot see others choice..hehe.. W that amount of Vdimm, you cannot play much of ram setting. yes,only can low divider. can give recommend ram for oc with low Vdimm (max 1.95V Vdimm with this board) ?? Just stick to your current ram and lower the divider will do. -pWs- |
|
|
Jan 6 2008, 04:06 PM
|
|
Newbie
3 posts Joined: Jan 2008
|
QUOTE(-pWs- @ Jan 6 2008, 02:42 AM) 1. Make sure your air circulation is good. ok here is my system :2. Change cooling if necessary I would recommend you to change board -pWs- AMD ATHLON 64 X2 5200+ ASUS M2N-E ATI Radeon HD 2600 XT 256MB DDR4 Corsair CM2X1024-6400 2GB |
|
|
Jan 6 2008, 04:12 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I thought I already answered your Q??
-pWs- |
|
|
Jan 6 2008, 04:16 PM
|
|
Newbie
3 posts Joined: Jan 2008
|
QUOTE(-pWs- @ Jan 6 2008, 04:12 PM) I thought I already answered your Q?? I THINK MY AIR CIRCULATION IS NOT BAD BUT ONLY GOT 3 FAN....-pWs- THE STARTER TEMO. IS ABOUT 44C @ 45C IF I WILL HAVE TO CHANGE MY COOLER, WHAT WILL BE THE BEST FOR MY MEDIUM SIZE CASING ? |
|
|
Jan 6 2008, 04:18 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Go search Xigmatek in Garage Sales. There are two models for Xigmatek.
P/S: Do not put all characters in big capital letter. -pWs- |
|
|
Jan 7 2008, 03:43 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
kingston n mushkin value RAM,issit got differences??which ones better??
|
|
|
Jan 8 2008, 10:49 AM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
QUOTE(jimmydotnet @ Jan 7 2008, 03:43 PM) kingston n mushkin value RAM,issit got differences??which ones better?? u already bought mushkin value ram then now ask the difference |
|
|
Jan 8 2008, 12:10 PM
|
Junior Member
29 posts Joined: Sep 2006 From: KLANG/SELANGOR
|
QUOTE(nitros06 @ Jan 8 2008, 10:49 AM) u already bought mushkin value ram then now ask the difference tokei already told u... if value ram all same la.... |
|
|
Jan 8 2008, 12:16 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
I would say ram depends on chipset
-pWs- |
|
|
 Jan 8 2008, 12:27 PM
|
|
Junior Member
29 posts Joined: Sep 2006 From: KLANG/SELANGOR
|
QUOTE(-pWs- @ Jan 8 2008, 12:16 PM) I would say ram depends on chipset heheh-pWs- there is no different between value ram but if performance ram ...there will be different m i right? |
|
|
Jan 8 2008, 12:46 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(nitros06 @ Jan 8 2008, 10:49 AM) u already bought mushkin value ram then now ask the difference that's why the create this forum...to ask people rich in it knowledge ... LOLQUOTE(baliman @ Jan 8 2008, 12:10 PM) tokei already told u... the value ram is the same...but can the chipset of the mobo support the ram chipset if value ram all same la.... QUOTE(-pWs- @ Jan 8 2008, 12:16 PM) I would say ram depends on chipset that's rite...m2n-e officially can be installed with mushkin, kingston value ram....corsair is not suitable...based on my experience -pWs- QUOTE(baliman @ Jan 8 2008, 12:27 PM) heheh ayat ni macam penah dengar je... there is no different between value ram but if performance ram ...there will be different m i right? |
|
|
Jan 8 2008, 12:48 PM
|
|
Junior Member
29 posts Joined: Sep 2006 From: KLANG/SELANGOR
|
[quote=jimmydotnet,Jan 8 2008, 12:46 PM]
that's why the create this forum...to ask people rich in it knowledge ... LOLthe value ram is the same...but can the chipset of the mobo support the ram chipset that's rite...m2n-e officially can be installed with mushkin, kingston value ram....corsair is not suitable...based on my experience ayat ni macam penah dengar je... [/quote yeke? |
|
|
Jan 8 2008, 12:52 PM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
dont go off topic...this is overclockers thread...
|
|
|
Jan 8 2008, 12:59 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(baliman @ Jan 8 2008, 12:48 PM) yeke? why don u try overclock ur ps3 ?? QUOTE(nitros06 @ Jan 8 2008, 12:52 PM) dont go off topic...this is overclockers thread... btw nitros06..how much did u overclock ur pc?? how many percent overclocked? LOLThis post has been edited by jimmydotnet: Jan 8 2008, 01:00 PM |
|
|
Jan 8 2008, 06:17 PM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
my pc overclocked well even the ram get hot!
but when i touch the chip on ram to know how hot is't,my pc turn down and cant boot for few minutes..and weird things is my pc not turned down if im not touch it.. |
|
|
Jan 8 2008, 06:21 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
It is confirmed can be overclocked well.
But the problem is how long your ram can take it. -pWs- |
|
|
Jan 8 2008, 07:28 PM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
QUOTE(-pWs- @ Jan 8 2008, 06:21 PM) It is confirmed can be overclocked well. is it my ram is going to dead?? But the problem is how long your ram can take it. -pWs- |
|
|
Jan 8 2008, 08:07 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Most probably.
Anyway, it is cheap to have some active cooling on ram. No harm doing it right??? -pWs- |
|
|
Jan 9 2008, 09:40 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(jimmydotnet @ Jan 8 2008, 12:59 PM) why don u try overclock ur ps3 ?? haha..baliman,give your ps3 to me.. confirm oc kaw2, dont be kedekut laa.. btw nitros06..how much did u overclock ur pc?? how many percent overclocked? LOL nitros06,you have ram problem? amazing,u use old skill to know how hot the ram by touch it .. ddr or ddr2? try la guna ram jimbo.. kata sebilik.. haha . Sell your old mobo and buy asus m2n-e like jimmydotnet,confirm can oc 100%... |
|
|
Jan 9 2008, 09:57 AM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(nitros06 @ Jan 8 2008, 06:17 PM) my pc overclocked well even the ram get hot! that's the sign to upgrade ur pc but when i touch the chip on ram to know how hot is't,my pc turn down and cant boot for few minutes..and weird things is my pc not turned down if im not touch it.. QUOTE(nitros06 @ Jan 8 2008, 07:28 PM) is it my ram is going to dead?? its not dead...do u remember who is the one who repair it??  QUOTE(Ciku @ Jan 9 2008, 09:40 AM) haha..baliman,give your ps3 to me.. confirm oc kaw2, dont be kedekut laa.. nitros06 well known for his traditional method ..LOL nitros06,you have ram problem? amazing,u use old skill to know how hot the ram by touch it .. ddr or ddr2? try la guna ram jimbo.. kata sebilik.. haha . Sell your old mobo and buy asus m2n-e like jimmydotnet,confirm can oc 100%... even his room is hot because of his ram temperature...just like his brother's pc LOL ...btw ciku nitros06 using ddr and agp....so want to buy my m2n-e?? p/s: ciku...im not living with nitros06 anymore... |
|
|
Jan 9 2008, 09:59 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
m2n-e cannot utilise HP ram becoz max vdimm 1.95.. lol..
|
|
|
Jan 9 2008, 10:37 AM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
QUOTE(jimmydotnet @ Jan 9 2008, 09:57 AM) that's the sign to upgrade ur pc just wait for my comeback la bro jimmy and bro ciku..then i show u all my traditional become beyond one..no use using m2n-e,no good either..LOL its not dead...do u remember who is the one who repair it?? nitros06 well known for his traditional method ..LOL even his room is hot because of his ram temperature...just like his brother's pc LOL ...btw ciku nitros06 using ddr and agp....so want to buy my m2n-e?? p/s: ciku...im not living with nitros06 anymore... p/s:ciku,jimmy live in kondo which has really sucks swimming pool,no chicks in bikini,dirty one...LOL |
|
|
Jan 9 2008, 12:18 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE(nitros06 @ Jan 9 2008, 10:37 AM) just wait for my comeback la bro jimmy and bro ciku..then i show u all my traditional become beyond one..no use using m2n-e,no good either..LOL if it is not good why did u kacau2 thread m2n-e ni?? this is a value mobo...that's why it has limited ocibility...p/s:ciku,jimmy live in kondo which has really sucks swimming pool,no chicks in bikini,dirty one...LOL p/s: btw nitros06....whose the one want to swim so bad?? |
|
|
Jan 10 2008, 12:12 PM
|
Senior Member
2,027 posts Joined: Nov 2007 From: Greenwood, GBK
|
hey, i'm planning to get this board later.. pair with 4000+..
|
|
|
Jan 10 2008, 12:27 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
If you are into overclocking, I would not recommend this board to you
-pWs- |
|
|
Jan 10 2008, 02:57 PM
|
|
Senior Member
2,027 posts Joined: Nov 2007 From: Greenwood, GBK
|
demm... then shud i change? how bout biostar ta770?
what do really look for in overclocking? chipset? |
|
|
Jan 10 2008, 11:29 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
if u wanna ocing, maybe u can try those cheapo biostar mobo.
if wanna sleek looking mob, u can try M2N-E, M2N32SLI deluxe or crosshair. those mobo also got good ocing capability.but not for M2N-E lor. its only got 1.95V dimm and 1.60V Vcore... with M2N-E, my 3800+ F2 only can hit 2.8ghz stable. 2.9ghz can boot but not test stablity yet... This post has been edited by rainingzero: Jan 10 2008, 11:30 PM |
|
|
Jan 11 2008, 12:30 AM
|
Junior Member
149 posts Joined: Feb 2006 From: Kacang Jelly
|
oit...maju dh skang ciku...
plz accept me as ur apprentice.lol. BTW, u use stock heatsink ka? |
|
|
Jan 11 2008, 12:33 AM
|
|
Junior Member
46 posts Joined: Dec 2007 From: Am-punk
|
ciku not use stock heatsink,he got new cooler one..am i rite ciku?
|
|
|
Jan 11 2008, 09:08 AM
|
|
Senior Member
2,027 posts Joined: Nov 2007 From: Greenwood, GBK
|
what bout epox?
|
|
|
Jan 11 2008, 09:51 AM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
QUOTE([][][][][] @ Jan 11 2008, 12:30 AM) oit...maju dh skang ciku... he is using new coolermaster heatsinkplz accept me as ur apprentice.lol. BTW, u use stock heatsink ka? QUOTE(nitros06 @ Jan 11 2008, 12:33 AM) ciku not use stock heatsink,he got new cooler one..am i rite ciku? nitros06 is ciku's best friend |
|
|
Jan 11 2008, 11:07 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(anep @ Jan 11 2008, 09:08 AM) what bout epox? epox mobo?? never tried that mobo.but for older gen proc, that mobo quite ok. guys, plz dont post off topic post here. later mod delete whole thread.... |
|
|
Jan 12 2008, 03:02 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
bro.. what is the best hsf that can fit in this mobo?
rm < 150??? |
|
|
Jan 12 2008, 03:56 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(Mr_47 @ Jan 12 2008, 03:02 AM) bro.. what is the best hsf that can fit in this mobo? IMO,u can fit many hsf in this mobo. already used a few cooler b4, no prob. tower cooler no prob at all.rm < 150??? currently using freezer 64 pro. b4 this i use TR xp90. no prob... u can fit noctua or TR 120 extreme. but its already overbudget.... but if u use cooler such as XP90, the heatpipe chipset will be extra cold since the air forced downwards to the heatpipe.... |
|
|
Jan 13 2008, 10:06 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE([][][][][] @ Jan 11 2008, 12:30 AM) oit...maju dh skang ciku... maju? try la oc 6600.. 8800gts dah jual ke? jual kat nitros06 rm 100plz accept me as ur apprentice.lol. BTW, u use stock heatsink ka? QUOTE(nitros06 @ Jan 11 2008, 12:33 AM) ciku not use stock heatsink,he got new cooler one..am i rite ciku? u rite,i'm using cooler master hyper txQUOTE(jimmydotnet @ Jan 11 2008, 09:51 AM) he is using new coolermaster heatsink thank for help me..nitros06 is ciku's best friend haha.. nitros06 n me share same fathers name ..but nitros is your brother.. p/s: why u leave nitros06 and get new house? I think nitros06 always verooonnn n u cannot tahan with perangai dia.. |
|
|
Jan 15 2008, 03:21 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(rainingzero @ Jan 12 2008, 03:56 PM) IMO,u can fit many hsf in this mobo. already used a few cooler b4, no prob. tower cooler no prob at all. ty bro... will find one ooo.. wanna smoke u guys... now doin 3100 wif stock fan huhucurrently using freezer 64 pro. b4 this i use TR xp90. no prob... u can fit noctua or TR 120 extreme. but its already overbudget.... but if u use cooler such as XP90, the heatpipe chipset will be extra cold since the air forced downwards to the heatpipe.... |
|
|
Jan 19 2008, 04:26 PM
|
Junior Member
231 posts Joined: Jun 2007
|
hello guys .. im using AMD x2 6000+ .. never oc before .. and im using m2ne also .. so how far do you think i can go ?
|
|
|
Jan 20 2008, 09:22 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(rasyid @ Jan 19 2008, 04:26 PM) hello guys .. im using AMD x2 6000+ .. never oc before .. and im using m2ne also .. so how far do you think i can go ? Since u use 6000+ and m2ne, i think not so far laa... both get limit in oc.. but try n luck Added on January 20, 2008, 9:22 am QUOTE(rasyid @ Jan 19 2008, 04:26 PM) hello guys .. im using AMD x2 6000+ .. never oc before .. and im using m2ne also .. so how far do you think i can go ? Since u use 6000+ and m2ne, i think not so far laa... both get limit in oc.. but try n luck This post has been edited by Ciku: Jan 20 2008, 09:22 AM |
|
|
Jan 20 2008, 10:31 AM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
yeah, like ciku said it wont go far. depends on ur luck...
|
|
|
Jan 21 2008, 10:44 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
bro did u guys tried oc using asus oc gui?? the ram voltage can set to 2.5v maximum...but why in bios they didnt set too...so sayangggg!! arr this mobo
|
|
|
Jan 21 2008, 11:23 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(fatalynx05 @ Jan 21 2008, 10:44 AM) bro did u guys tried oc using asus oc gui?? the ram voltage can set to 2.5v maximum...but why in bios they didnt set too...so sayangggg!! arr this mobo very2 sayangg... Ai booster can set Vdimm 2.5V. But in bios only can set to 1.95V maximun. Hope asus can do something with bad bios |
|
|
Jan 21 2008, 06:03 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(Ciku @ Jan 21 2008, 11:23 AM) very2 sayangg... but sometime not sayangg....ekekke coz of the vdimm lol Ai booster can set Vdimm 2.5V. But in bios only can set to 1.95V maximun. Hope asus can do something with bad bios |
|
|
Jan 21 2008, 06:06 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(Ciku @ Jan 21 2008, 11:23 AM) very2 sayangg... Impossible already. Ai booster can set Vdimm 2.5V. But in bios only can set to 1.95V maximun. Hope asus can do something with bad biosI heard people keep waiting for bios update to fix Vdimm since early last year. QUOTE(fatalynx05 @ Jan 21 2008, 06:03 PM) but sometime not sayangg....ekekke coz of the vdimm lol Yup -pWs- |
|
|
Jan 21 2008, 09:44 PM
|
|
Junior Member
231 posts Joined: Jun 2007
|
owh .. ok thanks guys .. im thinking of letting go this mobo ...
|
|
|
Jan 24 2008, 08:40 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(rasyid @ Jan 21 2008, 09:44 PM) owh .. ok thanks guys .. im thinking of letting go this mobo ... wah so many ppl wanna let go this mobo including me...huhu so sad arrr..to bad asus didnt do anything about the bios.. |
|
|
Jan 24 2008, 10:00 PM
|
Senior Member
2,478 posts Joined: Jan 2003
|
hi.. just tried to overclock my system.. please give some comment.. i'm not sure whether izzit consider good or not
Stock: AMD Athlon x2 5200+ 2.7GHz Brisbane Asus M2N-E Bios 1202 2x 1GB OCZ DDR2 800 Sapphire HD 3850 256MB DDR3 Cooler Master Extreme 460watt 2 x WD 80GB SATA 7.2krpm (RAID-0) Overclocked 3105MHz 13.5x230 HTT4 vcore:1.425 vdimm:1.95 Memory Timing: 5-5-5-13-19-2T Any better setting? |
|
|
Jan 28 2008, 04:47 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
Hi, how many mobo revision do we have for M2N-E?
Added on February 9, 2008, 3:02 amOC test Asus M2N-E, x2 F3 3800@3.3GHz, DDR2@1100MHz Super PI 32M and OCCT test Vdimm mod to 2.45V This post has been edited by ongbs: Feb 9 2008, 03:03 AM Attached thumbnail(s) 
|
|
|
Feb 9 2008, 06:52 AM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
I believe this is the limit of my M2N-E
x2 F3 3800@3.43GHz Vcore 1.5V, Micron D9DMH DDR2@1140MHz Vdimm mod to 2.50V. The DDR2 timings should be able to tighten slightly better This post has been edited by ongbs: Feb 9 2008, 06:53 AM Attached thumbnail(s) 
|
|
|
Feb 10 2008, 01:32 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(ongbs @ Feb 9 2008, 06:52 AM) I believe this is the limit of my M2N-E nice oc result.. How do you mod Vdimm to 2.50V? Max Vdimm in bios only 1.95V x2 F3 3800@3.43GHz Vcore 1.5V, Micron D9DMH DDR2@1140MHz Vdimm mod to 2.50V. The DDR2 timings should be able to tighten slightly better |
|
|
Feb 10 2008, 02:02 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(Ciku @ Feb 10 2008, 01:32 PM) nice oc result.. How do you mod Vdimm to 2.50V? Max Vdimm in bios only 1.95V hard mod it by solder a preset on the mobo can mod to 2.6V if you want |
|
|
Feb 10 2008, 02:48 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(ongbs @ Feb 10 2008, 02:02 PM) hard mod it by solder a preset on the mobo can do 2.6V..got any picture or review about mod? interested can mod to 2.6V if you want |
|
|
Feb 10 2008, 03:13 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(Ciku @ Feb 10 2008, 02:48 PM) can do 2.6V..got any picture or review about mod? interested try goggle for the link in 1st or 2nd page in this thread....got link there.but keep in mind that if do the mod wrongly it may burn your mobo or DDR2 module (maybe both)! This post has been edited by ongbs: Feb 10 2008, 03:14 PM |
|
|
Feb 12 2008, 10:40 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
bro did u mod like this using adjustable resistor??
 but this mobo is SLI version not ultra...still can?? mind if senior share This post has been edited by fatalynx05: Feb 12 2008, 10:44 AM |
|
|
Feb 12 2008, 03:08 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(fatalynx05 @ Feb 12 2008, 10:40 AM) bro did u mod like this using adjustable resistor?? Yes, the same mod.but this mobo is SLI version not ultra...still can?? mind if senior share Just make sure your MUST adjust the preset to higher ohm side before fire up... If you start your system with the preset at minimum resistant (about 0 ohm) you gonna fry yr ddr2 as the Vdimm >3V btw, I believe you may adjust the Vdimm without DDR2 module installed. Safety 1st p/s: bro, sorry coz didn't exchange the mobo with you... I seriously wanna exchange with you but you took too long time to trade and hardly online btw, no need to sell it off lah...it is a good mobo, just need Vdimm mod I can do 3.40GHz stable after Vdimm mod to 2.55V, but you still need a good DDR2 in order to do >1000MHz DDR2 speed. Mine stable at 1100MHz DDR2. for OC>3.2GHz for sure you need a good proc like AM2 X2 3800 F3. Recommended speed for 7/24 not >3.2G and temp keep below 50C idle or 60C max load. Refer screenie for my 7/24 rig with CnQ enable This post has been edited by ongbs: Feb 12 2008, 03:19 PM Attached thumbnail(s) 
|
|
|
Feb 13 2008, 11:43 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ongbs @ Feb 12 2008, 03:08 PM) Yes, the same mod. owhh...any kind of resistor also can aslong its 20k adjustable...the ground point attached at NB-Fan bottom left as shown at picture rite...huhu a bit nervous Just make sure your MUST adjust the preset to higher ohm side before fire up... If you start your system with the preset at minimum resistant (about 0 ohm) you gonna fry yr ddr2 as the Vdimm >3V btw, I believe you may adjust the Vdimm without DDR2 module installed. Safety 1st p/s: bro, sorry coz didn't exchange the mobo with you... I seriously wanna exchange with you but you took too long time to trade and hardly online btw, no need to sell it off lah...it is a good mobo, just need Vdimm mod I can do 3.40GHz stable after Vdimm mod to 2.55V, but you still need a good DDR2 in order to do >1000MHz DDR2 speed. Mine stable at 1100MHz DDR2. for OC>3.2GHz for sure you need a good proc like AM2 X2 3800 F3. Recommended speed for 7/24 not >3.2G and temp keep below 50C idle or 60C max load. Refer screenie for my 7/24 rig with CnQ enable ...my web site design still not done yet..everyday keep updating..my boss rape me later if not up to date the site...sowey bro wait me too long....btw can u show me some screenshot of ur mod moobo |
|
|
Feb 13 2008, 12:53 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(fatalynx05 @ Feb 13 2008, 11:43 AM) owhh...any kind of resistor also can aslong its 20k adjustable...the ground point attached at NB-Fan bottom left as shown at picture rite...huhu a bit nervous refer to the pic, actually that one is GROUNG point. ...my web site design still not done yet..everyday keep updating..my boss rape me later if not up to date the site...sowey bro wait me too long....btw can u show me some screenshot of ur mod moobo Just solder the wire to the round solder point surrounding the screw hole will do. You may use ohm meter to check the continuity for the "hole" and fan header (black color pin when plug in fan connector). Attached thumbnail(s) 
|
|
|
Feb 13 2008, 02:30 PM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(ongbs @ Feb 12 2008, 03:08 PM) Yes, the same mod. what range adjustable resistor u use? 0 - 20Kohm? And how to set Vdimm til get =<2.6V? Set in bios or use third party software, or get reading by using ohmmeterJust make sure your MUST adjust the preset to higher ohm side before fire up... If you start your system with the preset at minimum resistant (about 0 ohm) you gonna fry yr ddr2 as the Vdimm >3V btw, I believe you may adjust the Vdimm without DDR2 module installed. Safety 1st p/s: bro, sorry coz didn't exchange the mobo with you... I seriously wanna exchange with you but you took too long time to trade and hardly online btw, no need to sell it off lah...it is a good mobo, just need Vdimm mod I can do 3.40GHz stable after Vdimm mod to 2.55V, but you still need a good DDR2 in order to do >1000MHz DDR2 speed. Mine stable at 1100MHz DDR2. for OC>3.2GHz for sure you need a good proc like AM2 X2 3800 F3. Recommended speed for 7/24 not >3.2G and temp keep below 50C idle or 60C max load. Refer screenie for my 7/24 rig with CnQ enable |
|
|
Feb 13 2008, 07:40 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(Ciku @ Feb 13 2008, 02:30 PM) what range adjustable resistor u use? 0 - 20Kohm? And how to set Vdimm til get =<2.6V? Set in bios or use third party software, or get reading by using ohmmeter I am using 20k but I believe 10k will do better (easier to control).Well, just remove the DDR2 and measure the Vdimm while turning the preset toward the lower resistance range till the Vdimm you want. I set the BIOS Vdimm to 1.80 first (before remove your DDR lah) so max Vdimm is the measured voltage +0.15V (1.95V setting in BIOS). This post has been edited by ongbs: Feb 13 2008, 10:14 PM |
|
|
Feb 13 2008, 09:45 PM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
so complicated..need to see live tutorial to learn how to vmod..i got this mobo at home..wan vmod one day
|
|
|
Feb 13 2008, 10:17 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(alive88 @ Feb 13 2008, 09:45 PM) so complicated..need to see live tutorial to learn how to vmod..i got this mobo at home..wan vmod one day if you got electronic knowledge it is simple.If not sure better leave to someone who know what he is doing...just my advise |
|
|
Feb 14 2008, 01:03 AM
|
|
Senior Member
1,406 posts Joined: Jun 2007
|
i only got basic at electrical only..
This post has been edited by alive88: Feb 14 2008, 01:03 AM |
|
|
Feb 14 2008, 09:16 AM
|
|
Junior Member
98 posts Joined: Sep 2006 From: Tranung kite
|
QUOTE(ongbs @ Feb 13 2008, 10:17 PM) if you got electronic knowledge it is simple. I dont understand how to get Vdimm value after done make circuit mod If not sure better leave to someone who know what he is doing...just my advise Btw,need some tutorial picture here.. better you show your Vdimm mod picture here,step by step to do that |
|
|
Feb 14 2008, 10:05 AM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(Ciku @ Feb 14 2008, 09:16 AM) I dont understand how to get Vdimm value after done make circuit mod aiyo...bro, after solder just a few steps more lah...still need tutorial huh? Btw,need some tutorial picture here.. better you show your Vdimm mod picture here,step by step to do that refer to pics, make sure you solder the right points. 1. Before solder set your Vdimm in BIOS to 1.80V. 2. Remove all the DDR2 modules for safety purpose (make sure you get the right Vdimm then only you install the DDR2 modules) 3. After solder, measure the Vdimm measure point for actual Vdimm reading. 4. Turn the preset toward the lower resistance range till the Vdimm you want. (glue the preset with double-sided tape to avoid it from moving) simple as that.... Attached thumbnail(s) 
|
|
|
May 22 2008, 03:59 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
anywords wif latest bios??? version 1401???
|
|
|
May 22 2008, 04:07 PM
|
Senior Member
2,395 posts Joined: Mar 2008 From: Up in the Sky
|
hi guys. I have this mobo too...just got this so new about this mobo. where is the option in BIOS to increase vcore, FSB, HT link?
|
|
|
Jul 15 2008, 08:46 PM
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
QUOTE(Shah_15 @ May 22 2008, 04:07 PM) hi guys. I have this mobo too...just got this so new about this mobo. where is the option in BIOS to increase vcore, FSB, HT link? u can get vcore, FSB in the "Jumper free configuration"my problem is i cant find any option to change my HT multiplier. can sifu here teach me? |
|
|
Jan 1 2009, 12:46 PM
|
|
Senior Member
766 posts Joined: Nov 2005 From: Slim Shady Town
|
guys...can m2n-e supports the latest phenom x4 9950??
|
|
|
Jan 7 2009, 01:54 PM
|
Junior Member
6 posts Joined: Jan 2009
|
hi guys...ask a question anyone use this mobo wif x2 3600+ how farcan oc ?
|
|
|
Apr 5 2009, 03:07 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
this is the best i can do with this mobo...
 |
|
|
Mar 29 2010, 10:01 PM
|
Senior Member
698 posts Joined: Mar 2008 From: Oil town @ Miri
|
sorry to bring up this old thread..
FYI, asus has given new life for m2n-e users with new bios that supports am3 procs.. click here for more info on supported procs just wondering, anyone still using this old mobo?? anyone tested putting on am3 proc?? care to guide me? thinking of putting in phenom II 550, but the problem is i don knw how to update bios... any sifus here can help?? |
|
|
Mar 30 2010, 02:29 AM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
i changed my mobo already ler bro... sorry.
|
|
|
Mar 31 2010, 08:48 AM
|
|
Senior Member
698 posts Joined: Mar 2008 From: Oil town @ Miri
|
no one using this mobo anymore?? Mr_47, did u update ur bios b4?? using ez-flash?? btw, what does this means.. "Due to Bios ROM size limitation remove LAN PXE ROM and change Crashfree3 to Crashfree2" |
|
|
Mar 31 2010, 02:35 PM
|
|
Senior Member
4,338 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(chaics85 @ Mar 31 2010, 08:48 AM) no one using this mobo anymore?? Mr_47, did u update ur bios b4?? using ez-flash?? btw, what does this means.. "Due to Bios ROM size limitation remove LAN PXE ROM and change Crashfree3 to Crashfree2" 1. download the proper bios ( check your mobo version 1st and check you current bios version) 2. i used to flash the bios from windows, i think using ez-flash utility like in the link. http://images.google.com.my/imglanding?q=a...7L3a8_M&start=7 3. backup your old bios 4. point the update bios to your new bios file 5 update and restart. its so simple. 3. but i never encounter the message like yours. |
|
|
Apr 3 2010, 11:15 PM
|
|
Senior Member
5,211 posts Joined: Feb 2005 From: Konohana
|
QUOTE(chaics85 @ Mar 31 2010, 08:48 AM) btw, what does this means.. "Due to Bios ROM size limitation remove LAN PXE ROM and change Crashfree3 to Crashfree2" That means it remove some of the motherboard feature in the BIOS because the BIOS ROM is too small, why does ASUS done that? To make some room to put new CPU microcode to support AM3 CPU of course |
|
|
Nov 18 2010, 12:05 PM
|
Junior Member
45 posts Joined: Jun 2007
|
i m using it now! haha, actually i m downgrading... i found this board is interesting!
i flashed it to 5001! and using althon 635 x4 now! tested wif 955 c3 95w no prob! |
|
Topic ClosedOptions
|
| Change to: |  0.0789sec
 0.46
 6 queries
 GZIP Disabled
Time is now: 8th December 2025 - 01:58 AM |
Quote