Holla guys. There's a pre-set OCing /Noob OCing feature in M2N-E. N currently i set it to 10% OC,so my 4000+ is running @ 2.3

My question is,how much can i push my 4000+ without changing my HSF? Wut is the max tempt. limit can my 4000+ stand?

u may try to set the option to manual and try to push untill 2.5-2.7Ghz. IMHO, suppose no need to pump up too high Vcore for brisbane, hence no need the 3rd party cooler.
its actually depends on how much ur Vcore actually. higher Vcore will tends to increase ur procs temp. however, brisbane operates in much more cooler compared to windsor.
so, no need to worry much if ur vcore not too high...

Yes...as bro rainingzero said, overclock manually is the best.
I dun think you want to run certain overclock speed w some extra Vcore added while any lower Vcore than that is enough to stabilize for that particular speed.

-pWs-

this mobo have problems with corsair ram..failed to start the pc...i changed it to kingston ram...still no problem occur

mayb that crossair ram u bought is corrupted..

---

Added on December 26, 2007, 11:44 pmwith manual oc, u can hit till 3.0Ghz or higher..
try lower the multiplier & vdimm and try increase vcore..

This post has been edited by onslought: Dec 26 2007, 11:44 PM

dah tukar ram ke bang

ram dah tukar...the corsair ram put it into gigabyte p35 ds3...perform okay....

erm..maybe got issue for that rams. i tried KVR and micron B4, so fargot no issue...

anyone use freezer 64 pro?? i found out its really hard to mount this cooler at AM2 platform...

anyone can recommend good bios to oc for this mobo? currently i'm use 1001 beta. 0800 got problem with my dvdrw sata drive

just update the latest version of bios

http://support.asus.com/download/download....SLanguage=en-us

Succesful oc 3800 f3 with my asus m2n-e

cekap gile du....

try laa oc kat 6000+ lak . Takkan nak tgk jea

@Ciku
Go somemore. F3 3800 3GHz only starting point.
If limited by Vdimm, drop Ram Divider and oc more

-pWs-

starting point? hard to get 'final' point with m2n-e.. I try drop ram divider to 10 but system fail to boot. Actually I'm use pair of kingston value ram, but different chips. One of them use hynix and others one not sure what chip (only can see some code at the chip but not brand). Hynix chip only can pass 2.65Ghz and others one can reach 3Gz ( that why u can see in cpuz above I'm only use single ram). And now not sure my oc result is limit by ram or mobo.. Maybe both of them

If using the ram which can reach 3GHz, clock speed can go somemore???

-pWs-

only can reach fsb 301- 304 Mhz like that.. After that super PI test fail

Attach screenies of CPU-z [CPU & MEM] and Memset here

-pWs-

hehe, come here to visit bro ciku,
ape khabar ciku?
ape sal tu vcore baru 1.15v?
suppose to be 1.21v for your F3 at stock vcore la
i think your mobo has voltage drop problem
try to increase a bit vcore and see...
fill it up to 1.21v like that