Hi guys, I just changed a new casing that comes with 2 RGB fan. Thing is I’m kinda new on this RGB thingy. The fan itself I have connected to the motherboard. It’s working just without the RGB bling bling. I guess I need to connect the connector to somewhere ? I don’t think my motherboard has a connection for RGB. Below is the connector that comes with the RGB fan. Can anyone advise where does this connector connect to ?

what motherboard are you using?

Looks like ARGB connection for fans.

I’m using ASUS Z170M-PLUS

Those are RGB, not ARGB
4 pins 12v, not 3 pins 5v

dang wrong connectors man

Any idea how to connect my RGB fan ?

There’s 2 connector from the picture so I believe I can use either 1?

Don't think there's any RGB support on this mobo.

You can use this:
https://shopee.com.my/DOU-RGB-Controller-RF...4585.6959860794

Use the pwm header (4-pin female end)

If you have more than 1 of that RGB fan, you can use that RGB controller with this 12v RGB hub:
https://shopee.com.my/CONCON-12V-4pin-5V-3p...6108.5251145996

I checked this out. Apparently you still need to connect the cable to motherboard which has RGB port, which mine doesn’t have

I have 2 RGB fans that comes by default so this one only support 1

Did you not read my previous post saying you need to use that hub together with the controller?
It means you have to buy both of the item I posted above

u dont have RGB on your Mobo so u need the controller to provide signal for which lights you want. the sata power connector will power your RGB Fan and u can change the lights using remote. u can use 1 controller but need 4 pin RGB splitter to connect to your RGB fan.