Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Professional Electrician, Looking for professional electrician

views
     
TSMrGuGuZai
post Jan 12 2021, 07:43 PM, updated 5y ago

Getting Started
**
Junior Member
121 posts

Joined: Sep 2013
From: Klang Valley



Any recommended electician in selangor area? i looking for professional one not like those doing renovation and self called "electrician" garbage. Recently my room's light is flickering and MCB making buzzing sound, so i call eletrician from https://www.ade-electrician.com, that guy is totally sh1t, he just turn on and off the light, then blaming the MCB amp too low and ask me to change the whole panel bla2, he dont even test the voltage or check the wiring.
TSMrGuGuZai
post Jan 12 2021, 07:56 PM

Getting Started
**
Junior Member
121 posts

Joined: Sep 2013
From: Klang Valley



QUOTE(fireballs @ Jan 12 2021, 07:47 PM)
The guy is probably right
*
i did change all the stuff will same problem.
TSMrGuGuZai
post Jan 14 2021, 12:35 PM

Getting Started
**
Junior Member
121 posts

Joined: Sep 2013
From: Klang Valley



QUOTE(ceo684 @ Jan 12 2021, 10:34 PM)
Can you state what type of light exactly?
if you are running the old flourescent light using choke the choke can also wear out over time - time to change to electronic ballast. Few bucks only.

Or if you are running halogens on transformer/cheapo LED (less likely to flicker) driver going bad also may be source of this.
Need to see if the brand can pakai or totally no SIRIM crap.
*
Sorry for the late reply, im using 5w LED light actually, the problem is my housing wiring has too much loop, from ground floor single MCB panel loop to first floor/ whole house, the wiring pretty messed up, i think the contractor want to save money dulu, 13 years old house.

user posted image
user posted image

This post has been edited by MrGuGuZai: Jan 14 2021, 12:37 PM
TSMrGuGuZai
post Jan 14 2021, 12:36 PM

Getting Started
**
Junior Member
121 posts

Joined: Sep 2013
From: Klang Valley



QUOTE(fireballs @ Jan 12 2021, 10:26 PM)
take a photo of your db panel

the buzzing is likely from loose contact. the loose contact will start causing heat, then burn the mcb. usually one mcb charring will trigger the rest if not fix immediately.  

if u use those cap ayam one lagi facepalm

take the opportunity to review your protections against accidental touch/electrocution too
*
user posted image
user posted image

13 years old mcb, whole house .

This post has been edited by MrGuGuZai: Jan 14 2021, 12:36 PM

 

Change to:
| Lo-Fi Version
0.0138sec    0.52    7 queries    GZIP Disabled
Time is now: 10th December 2025 - 04:08 AM