1st batch bezza, year 2016, mileage 70k km
at first i thought is brake pads, changed brake pads still the same.
planning to do brake disc skimming, the mech removed the tyres and checked on the brake rotor, say is fine no sign of uneven surface,
said that it will be the same even after skimming as all bezza is the same due to the ABS issue.
went to service centre and check, also says is due to the ABS issue, all bezza is the same.

is it true that this issue is because of the ABS?
if it is then is really disappointing.

Not sure about Bezza, but this happened to a friend's 2001 Perdana... it's the ABS issue.

mine also year 2016 . no problems with brakes , no vibrate too.

if you turn off ABS still have the problem ?

Actually, when ABS is activated, you will feel the pedal vibrates in and out..

It is the ABS pump working.

does the abs warning lamp light up when u press brake?
few videos on youtube points to abnormal reading from wheel speed sensor. just clean the sensors at wheel.

how to turn off ABS?

yup but i feel like its very sensitive, i just press brake abit hard then the brake vibrate.. its not even hard braking that will lock the tyres also.

no the abs light doesnt turn on when braking..
i triedhard braking to test the ABS (in an empty parking lot) and the abs does blink and brake vibrate even more.

Possibly you are having a faulty ABS pump / modulator.

Is your car still under warranty?

Please check your tyres. Botak?

nope, went outside to service d.
but service centre said is common issue and that confuse me.

conti cc6 7 months or so.

Cc6 grip not very good bro. Even in dry condition

Based on what you have told us, it shud be related to your tyres. Your tyres triggers the abs.

Did it happen everytime or only on certain road condition?

it only happen when i press the brake slightly harder, wet or dry same thing.
it happens for around a year or so... before i change my stock tyres to cc6 already happening.

When u brake and it shake, did ur car pull to left or right?

did they try to clean the abs sensor for u?

Probably you can try and to a break fluid change.. Totally flush the oil fluid out and replace all new fluid in.

Good tyres, veey comfort but have to be careful. Not really convince with this tyre, i know coz im using them for myvi

But since ts said issue happened before changing to cc6, maybe not the tyre issue

This post has been edited by clockpulses: Oct 12 2020, 04:49 PM

Ts what tyre u use before the cc6?

myvi u use potenza also not convincing. the tyre is not HP tyre..but not that bad either.

Have you checked your brake disc condition?

First, make sure you check the brake pads, brake disc and caliper pin. After that, check also the lower arm and drive shaft and related components.

If those are okay then probable ABS. How much does it cost to change the ABS? BTW, I just found out that ABS can be fixed. You just need to find a workshop that can do that. However, if the new ABS is not that much more expensive then get it replaced.